[ Colin Watson ]
* Install oem-config-slideshow-ubuntu in a separate pass from
oem-config-$frontend and ubiquity-frontend-$frontend, since it may be
missing from images; and only do this for the GTK frontend in any case,
since other frontends don't currently use the slideshow (LP: #987050).
* Re-enable alpha warning for quantal.
* Upgrade to debhelper 9 for improved handling of compiler flags. Make
sure that /usr/lib/girepository-1.0/ stays where it's supposed to be
despite changes in the default libdir for multiarch.
* Port to Python 3:
- Use Python 3-style print functions.
- Use "except Exception as e" syntax rather than the old-style "except
Exception, e".
- Use reduce from functools rather than relying on the builtin.
- Use list comprehensions rather than filter or map.
- Use open() rather than file().
- Import configparser rather than ConfigParser if available.
- Use input() rather than raw_input() when running under Python 3.
- Use set comprehensions.
- Import quote from urllib.parse rather than urllib if available.
- Use new-style octal literals.
- Use test.support rather than test.test_support if available.
- Add --python2 and --python3 options to tests/run to force running the
tests under Python 2 or 3 respectively.
- Handle renaming of __builtin__ to builtins in Python 3.
- Only pass unicode=1 to gettext.install in Python 2.
- Port ubiquity.auto_update to python-apt 0.8 progress classes.
- Use Python 3 names for itertools.izip and itertools.izip_longest if
available.
- Use helpers from the six module to deal with some bytes/unicode
differences.
- As a general rule, open subprocesses with universal_newlines=True when
expecting to read text from them. This has no effect on Python 2
(aside from \r\n conversion and the like, which is mostly a no-op for
us), but causes Python 3 to read str rather than bytes. The
exceptions at the moment are: debconf-copydb subprocesses, which
return mixed-encoding data that needs to be handled specially; and
when feeding the output of a subprocess to hashlib.
- Use six.reraise rather than the three-argument form of raise.
- Adjust test_filteredcommand for Python 3 text handling.
- Fix test_ubi_partman.question_has_variables to handle templates files
as binary data, since they're mixed-encoding.
- Cope with assertItemsEqual/assertCountEqual naming difference between
Python 2.7 and 3.2.
- Rearrange ubiquity.i18n.get_translations to treat debconf-copydb
output as binary data and do field-dependent decoding.
- Adjust test_misc and test_upower to cope with file type changes in
Python 3.
- Use xml.etree.cElementTree instead of libxml2; it's faster, has a
smaller footprint by virtue of being built into the standard library,
arguably easier to read, and works with Python 3.
- Fix a slew of file handle leaks, including making much more liberal
use of context managers.
- When creating a default username based on the user's full name, decode
it back to a Unicode type after running it through the
ascii_transliterate encoder.
- Remove __pycache__ directories on clean.
- Use 'from __future__ import unicode_literals' in tests requiring
Unicode literals.
- Cope with various builtins and dict methods returning iterators rather
than lists in Python 3.
- Use chr rather than unichr in Python 3.
- Use six.string_types rather than types.StringTypes.
- Pass a byte string to Gtk.CssProvider.load_from_data.
- Replace all calls to unicode() with calls to six.text_type() or
misc.utf8() as appropriate.
- Use unicode_literals in ubiquity.keyboard_names.
- Fix up ubiquity.filteredcommand.debug and its tests for Python 3. In
Python 3, we can write Unicode strings (i.e. str) directly to
sys.stderr, and its defaults are such that the worst case is that they
get backslash-encoded. Arrange the tests to simulate this.
- Simplify ubiquity.nm.decode_ssid using bytearray(), allowing it to
work with Python 3 too.
- Open .debs in binary mode when verifying their contents.
- Decode text read from debconffilter subprocesses in Python 3.
- Only encode preseeded values in Python 2. Python 3's debconf module
accepts Unicode strings directly.
- Encode the second argument to struct.pack.
- Fix byte array handling when generating /etc/iftab.
- Fix a missing bit of python-apt 0.8 porting in ubiquity.install_misc.
- Open /var/lib/dpkg/status in binary mode when compressing it.
- Pass bytes rather than text to kdecore.ki18n.
- Call sip.setapi("QVariant", 1) on KDE frontend startup, pending a more
complete port to the new API.
- Use boolean tests rather than isNull, to cope with getting ordinary
Python strings rather than QStrings.
- In Python 3, pass strings directly to Qt rather than creating
QStrings.
- (Build-)depend on python3-gi, since python3-gi-cairo doesn't depend on
that and in any case we use it directly.
* Add Burmese translations.
* Remove obsolete uxlaunch handling, since it's no longer used and has
been removed from the archive.
* Avoid locking failures when clicking on the "update this installer" link
more than once.
* Move a bit more code into ubiquity.install_misc, including a new
target_file helper method.
* Remove unnecessary #! lines from non-executable files.
* Improve download verification to handle systems not configured for
multiarch, i.e. anything other than amd64 by default (LP: #998492).
* Automatic update of included source packages: choose-mirror 2.39ubuntu5,
clock-setup 0.110ubuntu1, debian-installer-utils 1.89ubuntu1,
localechooser 2.40ubuntu1.
[ Stéphane Graber ]
* Spawn dconf-service from ubiquity-dm and drop all the dbus-launch calls.
This should ensure we have a single dconf-service running and that gets
killed on ubiquity's exit.
* ubiquity-dm: Turn on the compositor in metacity. (LP: #987168)
* wallpaper: Update code to properly set the wallpaper when compositing
is enabled.
-- Colin Watson <email address hidden> Thu, 17 May 2012 03:09:54 +0100
This bug was fixed in the package ubiquity - 2.11.0
---------------
ubiquity (2.11.0) quantal; urgency=low
[ Colin Watson ] slideshow- ubuntu in a separate pass from config- $frontend and ubiquity- frontend- $frontend, since it may be girepository- 1.0/ stays where it's supposed to be auto_update to python-apt 0.8 progress classes. izip_longest if newlines= True when mmand for Python 3 text handling. partman. question_ has_variables to handle templates files l/assertCountEq ual naming difference between i18n.get_ translations to treat debconf-copydb cElementTree instead of libxml2; it's faster, has a transliterate encoder. .load_from_ data. keyboard_ names. filteredcommand .debug and its tests for Python 3. In nm.decode_ ssid using bytearray(), allowing it to install_ misc. dpkg/status in binary mode when compressing it. "QVariant" , 1) on KDE frontend startup, pending a more install_ misc, including a new installer- utils 1.89ubuntu1,
* Install oem-config-
oem-
missing from images; and only do this for the GTK frontend in any case,
since other frontends don't currently use the slideshow (LP: #987050).
* Re-enable alpha warning for quantal.
* Upgrade to debhelper 9 for improved handling of compiler flags. Make
sure that /usr/lib/
despite changes in the default libdir for multiarch.
* Port to Python 3:
- Use Python 3-style print functions.
- Use "except Exception as e" syntax rather than the old-style "except
Exception, e".
- Use reduce from functools rather than relying on the builtin.
- Use list comprehensions rather than filter or map.
- Use open() rather than file().
- Import configparser rather than ConfigParser if available.
- Use input() rather than raw_input() when running under Python 3.
- Use set comprehensions.
- Import quote from urllib.parse rather than urllib if available.
- Use new-style octal literals.
- Use test.support rather than test.test_support if available.
- Add --python2 and --python3 options to tests/run to force running the
tests under Python 2 or 3 respectively.
- Handle renaming of __builtin__ to builtins in Python 3.
- Only pass unicode=1 to gettext.install in Python 2.
- Port ubiquity.
- Use Python 3 names for itertools.izip and itertools.
available.
- Use helpers from the six module to deal with some bytes/unicode
differences.
- As a general rule, open subprocesses with universal_
expecting to read text from them. This has no effect on Python 2
(aside from \r\n conversion and the like, which is mostly a no-op for
us), but causes Python 3 to read str rather than bytes. The
exceptions at the moment are: debconf-copydb subprocesses, which
return mixed-encoding data that needs to be handled specially; and
when feeding the output of a subprocess to hashlib.
- Use six.reraise rather than the three-argument form of raise.
- Adjust test_filteredco
- Fix test_ubi_
as binary data, since they're mixed-encoding.
- Cope with assertItemsEqua
Python 2.7 and 3.2.
- Rearrange ubiquity.
output as binary data and do field-dependent decoding.
- Adjust test_misc and test_upower to cope with file type changes in
Python 3.
- Use xml.etree.
smaller footprint by virtue of being built into the standard library,
arguably easier to read, and works with Python 3.
- Fix a slew of file handle leaks, including making much more liberal
use of context managers.
- When creating a default username based on the user's full name, decode
it back to a Unicode type after running it through the
ascii_
- Remove __pycache__ directories on clean.
- Use 'from __future__ import unicode_literals' in tests requiring
Unicode literals.
- Cope with various builtins and dict methods returning iterators rather
than lists in Python 3.
- Use chr rather than unichr in Python 3.
- Use six.string_types rather than types.StringTypes.
- Pass a byte string to Gtk.CssProvider
- Replace all calls to unicode() with calls to six.text_type() or
misc.utf8() as appropriate.
- Use unicode_literals in ubiquity.
- Fix up ubiquity.
Python 3, we can write Unicode strings (i.e. str) directly to
sys.stderr, and its defaults are such that the worst case is that they
get backslash-encoded. Arrange the tests to simulate this.
- Simplify ubiquity.
work with Python 3 too.
- Open .debs in binary mode when verifying their contents.
- Decode text read from debconffilter subprocesses in Python 3.
- Only encode preseeded values in Python 2. Python 3's debconf module
accepts Unicode strings directly.
- Encode the second argument to struct.pack.
- Fix byte array handling when generating /etc/iftab.
- Fix a missing bit of python-apt 0.8 porting in ubiquity.
- Open /var/lib/
- Pass bytes rather than text to kdecore.ki18n.
- Call sip.setapi(
complete port to the new API.
- Use boolean tests rather than isNull, to cope with getting ordinary
Python strings rather than QStrings.
- In Python 3, pass strings directly to Qt rather than creating
QStrings.
- (Build-)depend on python3-gi, since python3-gi-cairo doesn't depend on
that and in any case we use it directly.
* Add Burmese translations.
* Remove obsolete uxlaunch handling, since it's no longer used and has
been removed from the archive.
* Avoid locking failures when clicking on the "update this installer" link
more than once.
* Move a bit more code into ubiquity.
target_file helper method.
* Remove unnecessary #! lines from non-executable files.
* Improve download verification to handle systems not configured for
multiarch, i.e. anything other than amd64 by default (LP: #998492).
* Automatic update of included source packages: choose-mirror 2.39ubuntu5,
clock-setup 0.110ubuntu1, debian-
localechooser 2.40ubuntu1.
[ Stéphane Graber ]
* Spawn dconf-service from ubiquity-dm and drop all the dbus-launch calls.
This should ensure we have a single dconf-service running and that gets
killed on ubiquity's exit.
* ubiquity-dm: Turn on the compositor in metacity. (LP: #987168)
* wallpaper: Update code to properly set the wallpaper when compositing
is enabled.
-- Colin Watson <email address hidden> Thu, 17 May 2012 03:09:54 +0100