Comment 0 for bug 904412

As in Oneiric, the USB3 hardware I've tried hangs and seemingly powers off when connected to a USB3 port. The same hardware works fine when plugged into a USB2 port.

For reference, I'm trying to use this USB3 card reader:

http://www.amazon.com/Lexar-Professional-Dual-Slot-Reader-LRW300URBNA/dp/B0050C9ZMC

On a motherboard with an NEC uPD720200 USB3 controller (2 ports). The card reader appears to work normally for a short moment, and then seems to power-down (the light goes off similar to when you eject/safely remove the card). Here is the interesting bits from dmesg:

[ 663.396520] usb 9-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 663.416311] xhci_hcd 0000:03:00.0: WARN: short transfer on control ep
[ 663.416948] xhci_hcd 0000:03:00.0: WARN: short transfer on control ep
[ 663.417432] xhci_hcd 0000:03:00.0: WARN: short transfer on control ep
[ 663.418057] xhci_hcd 0000:03:00.0: WARN: short transfer on control ep
[ 663.419343] scsi7 : usb-storage 9-1:1.0
[ 664.417484] scsi 7:0:0:0: Direct-Access Lexar CF USB_3_0 Read 0545 PQ: 0 ANSI: 0
[ 664.418244] scsi 7:0:0:1: Direct-Access Lexar SD USB_3_0 Read 0545 PQ: 0 ANSI: 0
[ 664.419532] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 664.420353] sd 7:0:0:1: Attached scsi generic sg3 type 0
[ 664.421612] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 664.422757] sd 7:0:0:1: [sdd] Attached SCSI removable disk
[ 707.003933] xhci_hcd 0000:03:00.0: WARN: transfer error on endpoint
[ 707.234454] usb 9-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 707.339021] xhci_hcd 0000:03:00.0: WARN: short transfer on control ep
[ 707.339144] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880207691b80
[ 707.339152] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880207691bc0
[ 711.713643] sd 7:0:0:0: [sdc] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 711.713817] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint
[ 711.714552] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint
[ 711.715110] sd 7:0:0:0: [sdc] No Caching mode page present
[ 711.715120] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 711.715834] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint
[ 711.716529] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint
[ 711.717109] sd 7:0:0:0: [sdc] No Caching mode page present
[ 711.717118] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 711.740043] xhci_hcd 0000:03:00.0: WARN: transfer error on endpoint
[ 731.852099] xhci_hcd 0000:03:00.0: Timeout while waiting for address device command

ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-4-generic 3.2.0-4.10
ProcVersionSignature: Ubuntu 3.2.0-4.10-generic 3.2.0-rc5
Uname: Linux 3.2.0-4-generic x86_64
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 1.90-0ubuntu1
Architecture: amd64
ArecordDevices:
 **** List of CAPTURE Hardware Devices ****
 card 0: SB [HDA ATI SB], device 0: VT1818S Analog [VT1818S Analog]
   Subdevices: 2/2
   Subdevice #0: subdevice #0
   Subdevice #1: subdevice #1
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: jderose 1918 F.... pulseaudio
CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found.
Card0.Amixer.info:
 Card hw:0 'SB'/'HDA ATI SB at 0xfe7f4000 irq 16'
   Mixer name : 'VIA VT1818S'
   Components : 'HDA:11060440,10438416,00100000'
   Controls : 37
   Simple ctrls : 22
Card1.Amixer.info:
 Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfe9ec000 irq 51'
   Mixer name : 'ATI R6xx HDMI'
   Components : 'HDA:1002aa01,00aa0100,00100100'
   Controls : 5
   Simple ctrls : 1
Card1.Amixer.values:
 Simple mixer control 'IEC958',0
   Capabilities: pswitch pswitch-joined penum
   Playback channels: Mono
   Mono: Playback [on]
Date: Wed Dec 14 12:50:08 2011
EcryptfsInUse: Yes
HibernationDevice: RESUME=UUID=475ae5fc-8e8e-4900-8a40-1de4e54a228f
InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Beta amd64 (20110921.2)
IwConfig:
 lo no wireless extensions.

 eth0 no wireless extensions.
MachineType: System manufacturer System Product Name
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-generic root=UUID=99836a48-007a-45a5-9adc-2750052761af ro quiet splash vt.handoff=7
RelatedPackageVersions:
 linux-restricted-modules-3.2.0-4-generic N/A
 linux-backports-modules-3.2.0-4-generic N/A
 linux-firmware 1.62
RfKill:

SourcePackage: linux
UpgradeStatus: Upgraded to precise on 2011-12-01 (12 days ago)
dmi.bios.date: 03/08/2011
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 2001
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: M4A87TD/USB3
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: Rev 1.xx
dmi.chassis.asset.tag: Asset-1234567890
dmi.chassis.type: 3
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version: Chassis Version
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2001:bd03/08/2011:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM4A87TD/USB3:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
dmi.product.name: System Product Name
dmi.product.version: System Version
dmi.sys.vendor: System manufacturer