Hi !
I'm using Natty Narwhal on my Eeepc 1000HE. The wifi connection works well at login, but after a while (from few seconds to hour) the connection become down. Then up, then down, then up.... Sometimes WPA code is requested.
Please find below more information :
~$ lspci -nn | grep -i net
01:00.0 Network controller [0280]: Ralink corp. RT2860 [1814:0781] 03:00.0 Ethernet controller [0200]: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
$ lsmod
Module Size Used by cryptd 19801 0 aes_i586 16956 1 aes_generic 38023 1 aes_i586 binfmt_misc 13213 1 parport_pc 32111 0 ppdev 12849 0 snd_hda_codec_realtek 255820 1 snd_hda_intel 24140 3 snd_hda_codec 90901 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13274 1 snd_hda_codec snd_pcm 80244 2 snd_hda_intel,snd_hda_codec rt2860sta 494649 0 arc4 12473 2 i915 450944 2 joydev 17322 0 snd_seq_midi 13132 0 rt2800pci 18159 0 rt2800lib 43824 1 rt2800pci snd_rawmidi 25269 1 snd_seq_midi crc_ccitt 12595 2 rt2860sta,rt2800lib snd_seq_midi_event 14475 1 snd_seq_midi rt2x00pci 13986 1 rt2800pci snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event rt2x00lib 39075 3 rt2800pci,rt2800lib,rt2x00pci mac80211 257001 3 rt2800lib,rt2x00pci,rt2x00lib drm_kms_helper 40745 1 i915 snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq drm 180037 3 i915,drm_kms_helper uvcvideo 66851 0 cfg80211 156212 2 rt2x00lib,mac80211 psmouse 73312 0 videodev 75143 1 uvcvideo snd 55295 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device i2c_algo_bit 13184 1 i915 serio_raw 12990 0 soundcore 12600 1 snd eeepc_laptop 19417 0 eeprom_93cx6 12653 1 rt2800pci snd_page_alloc 14073 2 snd_hda_intel,snd_pcm video 18951 1 i915 sparse_keymap 13666 1 eeepc_laptop lp 13349 0 parport 36746 3 parport_pc,ppdev,lp atl1e 32576 0
~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"NEUF_8E4C" Mode:Managed Frequency:2.462 GHz Access Point: 00:25:15:3B:8E:50 Bit Rate=18 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=70/70 Signal level=-40 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:5 Invalid misc:37 Missed beacon:0
~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:24:8c:88:0e:e5 UP BROADCAST MULTICAST MTU:1500 Metric:1 Packets reçus:0 erreurs:0 :0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 lg file transmission:1000 Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B) Interruption:44
lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:117 erreurs:0 :0 overruns:0 frame:0 TX packets:117 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 Octets reçus:8536 (8.5 KB) Octets transmis:8536 (8.5 KB)
wlan0 Link encap:Ethernet HWaddr 00:22:43:6f:25:6b inet adr:192.168.1.44 Bcast:192.168.1.255 Masque:255.255.255.0 adr inet6: fe80::222:43ff:fe6f:256b/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:694 erreurs:0 :0 overruns:0 frame:0 TX packets:828 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:279598 (279.5 KB) Octets transmis:132177 (132.1 KB)
~$ nm-tool
NetworkManager Tool
State: connected
- Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: ATL1E State: unavailable Default: no HW Address: 00:24:8C:88:0E:E5
Capabilities: Carrier Detect: yes
Wired Properties Carrier: off
- Device: wlan0 [Auto NEUF_8E4C] ---------------------------------------------- Type: 802.11 WiFi Driver: rt2800pci State: connected Default: yes HW Address: 00:22:43:6F:25:6B
Capabilities: Speed: 9 Mb/s
Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes
IPv4 Settings: Address: 192.168.1.44 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1
DNS: 192.168.1.1
Kind Regards, Xavier.
Hi !
I'm using Natty Narwhal on my Eeepc 1000HE. The wifi connection works well at login, but after a while (from few seconds to hour) the connection become down. Then up, then down, then up.... Sometimes WPA code is requested.
Please find below more information :
~$ lspci -nn | grep -i net
01:00.0 Network controller [0280]: Ralink corp. RT2860 [1814:0781] AR8113/ AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
03:00.0 Ethernet controller [0200]: Atheros Communications AR8121/
$ lsmod
Module Size Used by codec_realtek 255820 1 codec_realtek, snd_hda_ intel intel,snd_ hda_codec midi,snd_ seq_midi_ event rt2800lib, rt2x00pci rt2x00pci, rt2x00lib midi,snd_ rawmidi, snd_seq codec_realtek, snd_hda_ intel,snd_ hda_codec, snd_hwdep, snd_pcm, snd_rawmidi, snd_seq, snd_timer, snd_seq_ device intel,snd_ pcm
cryptd 19801 0
aes_i586 16956 1
aes_generic 38023 1 aes_i586
binfmt_misc 13213 1
parport_pc 32111 0
ppdev 12849 0
snd_hda_
snd_hda_intel 24140 3
snd_hda_codec 90901 2 snd_hda_
snd_hwdep 13274 1 snd_hda_codec
snd_pcm 80244 2 snd_hda_
rt2860sta 494649 0
arc4 12473 2
i915 450944 2
joydev 17322 0
snd_seq_midi 13132 0
rt2800pci 18159 0
rt2800lib 43824 1 rt2800pci
snd_rawmidi 25269 1 snd_seq_midi
crc_ccitt 12595 2 rt2860sta,rt2800lib
snd_seq_midi_event 14475 1 snd_seq_midi
rt2x00pci 13986 1 rt2800pci
snd_seq 51291 2 snd_seq_
rt2x00lib 39075 3 rt2800pci,
mac80211 257001 3 rt2800lib,
drm_kms_helper 40745 1 i915
snd_timer 28659 2 snd_pcm,snd_seq
snd_seq_device 14110 3 snd_seq_
drm 180037 3 i915,drm_kms_helper
uvcvideo 66851 0
cfg80211 156212 2 rt2x00lib,mac80211
psmouse 73312 0
videodev 75143 1 uvcvideo
snd 55295 15 snd_hda_
i2c_algo_bit 13184 1 i915
serio_raw 12990 0
soundcore 12600 1 snd
eeepc_laptop 19417 0
eeprom_93cx6 12653 1 rt2800pci
snd_page_alloc 14073 2 snd_hda_
video 18951 1 i915
sparse_keymap 13666 1 eeepc_laptop
lp 13349 0
parport 36746 3 parport_pc,ppdev,lp
atl1e 32576 0
~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"NEUF_8E4C"
Mode: Managed Frequency:2.462 GHz Access Point: 00:25:15:3B:8E:50
Bit Rate=18 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=70/70 Signal level=-40 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:5 Invalid misc:37 Missed beacon:0
~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:24:8c:88:0e:e5
collisions: 0 lg file transmission:1000
Interruption :44
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:1
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
lo Link encap:Boucle locale
collisions: 0 lg file transmission:0
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:117 erreurs:0 :0 overruns:0 frame:0
TX packets:117 errors:0 dropped:0 overruns:0 carrier:0
Octets reçus:8536 (8.5 KB) Octets transmis:8536 (8.5 KB)
wlan0 Link encap:Ethernet HWaddr 00:22:43:6f:25:6b 255.255. 255.0 43ff:fe6f: 256b/64 Scope:Lien
collisions: 0 lg file transmission:1000
inet adr:192.168.1.44 Bcast:192.168.1.255 Masque:
adr inet6: fe80::222:
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:694 erreurs:0 :0 overruns:0 frame:0
TX packets:828 errors:0 dropped:0 overruns:0 carrier:0
Octets reçus:279598 (279.5 KB) Octets transmis:132177 (132.1 KB)
~$ nm-tool
NetworkManager Tool
State: connected
- Device: eth0 ------- ------- ------- ------- ------- ------- ------- ------- ------- --
Type: Wired
Driver: ATL1E
State: unavailable
Default: no
HW Address: 00:24:8C:88:0E:E5
Capabilities:
Carrier Detect: yes
Wired Properties
Carrier: off
- Device: wlan0 [Auto NEUF_8E4C] ------- ------- ------- ------- ------- ------- ----
Type: 802.11 WiFi
Driver: rt2800pci
State: connected
Default: yes
HW Address: 00:22:43:6F:25:6B
Capabilities:
Speed: 9 Mb/s
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
IPv4 Settings:
Address: 192.168.1.44
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.1
DNS: 192.168.1.1
Kind Regards,
Xavier.