WARNING: at /build/buildd/linux-2.6.31/net/sched/sch_generic.c:246 dev_watchdog+0x1f6/0x210()

Bug #467550 reported by Fretplay
10
This bug affects 2 people
Affects Status Importance Assigned to Milestone
linux (Ubuntu)
New
Undecided
Unassigned

Bug Description

uname -a =Linux Fretplay 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 GNU/Linux

cat /proc/version_signature =Ubuntu 2.6.31-14.48-generic
dmesg; (I realise that somethingis missing but this is all I get by writing this command;
[ 0.004797] [<c0111dbb>] mce_intel_feature_init+0xb/0x60
[ 0.004812] [<c010fcf0>] mce_cpu_features+0x10/0x40
[ 0.004831] [<c056ac3c>] mcheck_init+0x14a/0x188
[ 0.004846] [<c0569078>] ? init_hypervisor+0xb/0x2c
[ 0.004860] [<c0569030>] identify_cpu+0x20e/0x21d
[ 0.004879] [<c0795732>] identify_boot_cpu+0xd/0x23
[ 0.004894] [<c07958c8>] check_bugs+0xb/0xe9
[ 0.004912] [<c078e8c3>] start_kernel+0x2dc/0x2ec
[ 0.004927] [<c078e406>] ? unknown_bootoption+0x0/0x1ab
[ 0.004942] [<c078e07c>] i386_start_kernel+0x7c/0x83
[ 0.004969] ---[ end trace a7919e7f17c0a725 ]---
[ 0.004981] CPU0: Thermal monitoring enabled (TM1)
[ 0.005003] Performance Counters: no PMU driver, software counters only.
[ 0.005022] Checking 'hlt' instruction... OK.
[ 0.021750] SMP alternatives: switching to UP code
[ 0.040038] Freeing SMP alternatives: 19k freed
[ 0.040076] ACPI: Core revision 20090521
[ 0.057557] ACPI: setting ELCR to 0200 (from 0800)
[ 0.060142] weird, boot CPU (#0) not listed by the BIOS.
[ 0.060149] SMP motherboard not detected.
[ 0.060157] Local APIC not detected. Using dummy APIC emulation.
[ 0.060163] SMP disabled
[ 0.060509] Brought up 1 CPUs
[ 0.060519] Total of 1 processors activated (2390.54 BogoMIPS).
[ 0.060546] CPU0 attaching NULL sched-domain.
[ 0.061121] Booting paravirtualized kernel on bare hardware
[ 0.061713] regulator: core version 0.5
[ 0.061759] Time: 21:17:00 Date: 10/31/09
[ 0.061885] NET: Registered protocol family 16
[ 0.062251] EISA bus registered
[ 0.062287] ACPI: bus type pci registered
[ 0.066007] PCI: PCI BIOS revision 2.10 entry at 0xf17c0, last bus=1
[ 0.066015] PCI: Using configuration type 1 for base access
[ 0.069180] bio: create slab <bio-0> at 0
[ 0.070623] ACPI: EC: Look up EC in DSDT
[ 0.097276] ACPI: Interpreter enabled
[ 0.097295] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.097384] ACPI: Using PIC for interrupt routing
[ 0.125457] ACPI: Power Resource [FN0] (off)
[ 0.129755] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.130066] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.130182] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xebffffff]
[ 0.130437] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.130525] pci 0000:00:02.1: reg 20 io port: [0xe600-0xe61f]
[ 0.130597] pci 0000:00:02.2: reg 10 32bit mmio: [0xe7000000-0xe7000fff]
[ 0.130698] pci 0000:00:02.3: reg 10 32bit mmio: [0xe6800000-0xe6800fff]
[ 0.130837] pci 0000:00:02.5: reg 20 io port: [0xb800-0xb80f]
[ 0.130935] pci 0000:00:02.7: reg 10 io port: [0xa800-0xa8ff]
[ 0.130953] pci 0000:00:02.7: reg 14 io port: [0xa400-0xa47f]
[ 0.131032] pci 0000:00:02.7: supports D1 D2
[ 0.131041] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.131053] pci 0000:00:02.7: PME# disabled
[ 0.131121] pci 0000:00:03.0: reg 10 io port: [0xa000-0xa0ff]
[ 0.131140] pci 0000:00:03.0: reg 14 32bit mmio: [0xe6000000-0xe6000fff]
[ 0.131190] pci 0000:00:03.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.131228] pci 0000:00:03.0: supports D1 D2
[ 0.131236] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.131248] pci 0000:00:03.0: PME# disabled
[ 0.131330] pci 0000:00:0a.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.131368] pci 0000:00:0a.0: supports D1 D2
[ 0.131376] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.131388] pci 0000:00:0a.0: PME# disabled
[ 0.131456] pci 0000:00:0a.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.131493] pci 0000:00:0a.1: supports D1 D2
[ 0.131501] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.131513] pci 0000:00:0a.1: PME# disabled
[ 0.131580] pci 0000:00:0a.2: reg 10 32bit mmio: [0xe5800000-0xe58007ff]
[ 0.131665] pci 0000:00:0a.2: PME# supported from D0 D3hot D3cold
[ 0.131676] pci 0000:00:0a.2: PME# disabled
[ 0.131759] pci 0000:00:0c.0: reg 10 32bit mmio: [0xe5000000-0xe500ffff]
[ 0.131777] pci 0000:00:0c.0: reg 14 io port: [0x9800-0x9807]
[ 0.131852] pci 0000:00:0c.0: PME# supported from D3hot D3cold
[ 0.131864] pci 0000:00:0c.0: PME# disabled
[ 0.132017] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
[ 0.132033] pci 0000:01:00.0: reg 14 32bit mmio: [0xe7800000-0xe781ffff]
[ 0.132049] pci 0000:01:00.0: reg 18 io port: [0xd800-0xd87f]
[ 0.132112] pci 0000:01:00.0: supports D1 D2
[ 0.132187] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.132200] pci 0000:00:01.0: bridge 32bit mmio: [0xe7800000-0xe7ffffff]
[ 0.132213] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xfebfffff]
[ 0.132298] pci_bus 0000:00: on NUMA node 0
[ 0.132313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.132548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.255703] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 15)
[ 0.256023] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 15)
[ 0.256322] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 15)
[ 0.256615] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 15)
[ 0.257143] SCSI subsystem initialized
[ 0.257300] libata version 3.00 loaded.
[ 0.257506] usbcore: registered new interface driver usbfs
[ 0.257556] usbcore: registered new interface driver hub
[ 0.257626] usbcore: registered new device driver usb
[ 0.258000] ACPI: WMI: Mapper loaded
[ 0.258008] PCI: Using ACPI for IRQ routing
[ 0.258351] Bluetooth: Core ver 2.15
[ 0.258434] NET: Registered protocol family 31
[ 0.258440] Bluetooth: HCI device and connection manager initialized
[ 0.258450] Bluetooth: HCI socket layer initialized
[ 0.258457] NetLabel: Initializing
[ 0.258464] NetLabel: domain hash size = 128
[ 0.258470] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.258504] NetLabel: unlabeled traffic allowed by default
[ 0.262446] pnp: PnP ACPI init
[ 0.262498] ACPI: bus type pnp registered
[ 0.273958] pnp: PnP ACPI: found 15 devices
[ 0.273968] ACPI: ACPI bus type pnp unregistered
[ 0.273981] PnPBIOS: Disabled by ACPI PNP
[ 0.274012] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.274025] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.274036] system 00:00: iomem range 0x100000-0x16ffffff could not be reserved
[ 0.274058] system 00:02: ioport range 0xe400-0xe47f has been reserved
[ 0.274068] system 00:02: ioport range 0xe480-0xe4ff has been reserved
[ 0.274079] system 00:02: ioport range 0xe600-0xe61f has been reserved
[ 0.274090] system 00:02: ioport range 0x480-0x48f has been reserved
[ 0.274101] system 00:02: iomem range 0xffee0000-0xffefffff has been reserved
[ 0.274120] system 00:03: iomem range 0xfffe0000-0xffffffff could not be reserved
[ 0.274139] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.274165] system 00:0e: ioport range 0x3f0-0x3f1 has been reserved
[ 0.309129] AppArmor: AppArmor Filesystem Enabled
[ 0.309208] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.309219] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.309234] pci 0000:00:01.0: MEM window: 0xe7800000-0xe7ffffff
[ 0.309247] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xfebfffff
[ 0.309261] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02
[ 0.309270] pci 0000:00:0a.0: IO window: 0x001000-0x0010ff
[ 0.309283] pci 0000:00:0a.0: IO window: 0x001400-0x0014ff
[ 0.309295] pci 0000:00:0a.0: PREFETCH window: 0x18000000-0x1bffffff
[ 0.309308] pci 0000:00:0a.0: MEM window: 0x1c000000-0x1fffffff
[ 0.309321] pci 0000:00:0a.1: CardBus bridge, secondary bus 0000:06
[ 0.309329] pci 0000:00:0a.1: IO window: 0x001800-0x0018ff
[ 0.309342] pci 0000:00:0a.1: IO window: 0x001c00-0x001cff
[ 0.309354] pci 0000:00:0a.1: PREFETCH window: 0x20000000-0x23ffffff
[ 0.309367] pci 0000:00:0a.1: MEM window: 0x24000000-0x27ffffff
[ 0.309393] pci 0000:00:01.0: setting latency timer to 64
[ 0.310265] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.310274] PCI: setting IRQ 11 as level-triggered
[ 0.310287] pci 0000:00:0a.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.310313] pci 0000:00:0a.1: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.310331] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.310341] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.310352] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.310362] pci_bus 0000:01: resource 1 mem: [0xe7800000-0xe7ffffff]
[ 0.310372] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xfebfffff]
[ 0.310383] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff]
[ 0.310393] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff]
[ 0.310402] pci_bus 0000:02: resource 2 pref mem [0x18000000-0x1bffffff]
[ 0.310412] pci_bus 0000:02: resource 3 mem: [0x1c000000-0x1fffffff]
[ 0.310423] pci_bus 0000:06: resource 0 io: [0x1800-0x18ff]
[ 0.310432] pci_bus 0000:06: resource 1 io: [0x1c00-0x1cff]
[ 0.310442] pci_bus 0000:06: resource 2 pref mem [0x20000000-0x23ffffff]
[ 0.310452] pci_bus 0000:06: resource 3 mem: [0x24000000-0x27ffffff]
[ 0.310552] NET: Registered protocol family 2
[ 0.310800] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.311501] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.311652] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.311790] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.311798] TCP reno registered
[ 0.312025] NET: Registered protocol family 1
[ 0.312191] Trying to unpack rootfs image as initramfs...
[ 0.812005] Switched to high resolution mode on CPU 0
[ 0.840117] Freeing initrd memory: 7477k freed
[ 0.852559] Simple Boot Flag at 0x3a set to 0x1
[ 0.852787] cpufreq-nforce2: No nForce2 chipset.
[ 0.852853] Scanning for low memory corruption every 60 seconds
[ 0.853144] audit: initializing netlink socket (disabled)
[ 0.853186] type=2000 audit(1257023819.852:1): initialized
[ 0.873547] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.877292] VFS: Disk quotas dquot_6.5.2
[ 0.877443] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.878929] fuse init (API version 7.12)
[ 0.879159] msgmni has been set to 709
[ 0.879664] alg: No test for stdrng (krng)
[ 0.879703] io scheduler noop registered
[ 0.879712] io scheduler anticipatory registered
[ 0.879719] io scheduler deadline registered
[ 0.879852] io scheduler cfq registered (default)
[ 0.879958] pci 0000:01:00.0: Boot video device
[ 0.880258] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.880331] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.881356] ACPI: AC Adapter [AC] (off-line)
[ 0.881539] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.881551] ACPI: Power Button [PWRF]
[ 0.881684] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.881764] ACPI: Lid Switch [LID]
[ 0.881880] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.881890] ACPI: Power Button [PWRB]
[ 0.882014] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 0.882023] ACPI: Sleep Button [SLPB]
[ 0.882155] fan PNP0C0B:00: registered as cooling_device0
[ 0.882173] ACPI: Fan [FAN0] (on)
[ 0.882651] Marking TSC unstable due to TSC halts in idle
[ 0.882690] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 0.882745] processor LNXCPU:00: registered as cooling_device1
[ 0.882756] ACPI: Processor [CPU0] (supports 4 throttling states)
[ 0.906434] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.906464] ACPI: Thermal Zone [THRM] (25 C)
[ 0.906599] isapnp: Scanning for PnP cards...
[ 1.016793] ACPI: Battery Slot [BAT0] (battery present)
[ 1.364270] isapnp: No Plug & Play device found
[ 1.367725] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.367976] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 1.371302] brd: module loaded
[ 1.372547] loop: module loaded
[ 1.372780] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.374431] pata_sis 0000:00:02.5: version 0.5.2
[ 1.374806] scsi0 : pata_sis
[ 1.375052] scsi1 : pata_sis
[ 1.376627] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[ 1.376637] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[ 1.377895] Fixed MDIO Bus: probed
[ 1.378009] PPP generic driver version 2.4.2
[ 1.378301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.378364] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.379296] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 1.379310] ohci_hcd 0000:00:02.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 1.379350] ohci_hcd 0000:00:02.2: OHCI Host Controller
[ 1.379499] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 1.379545] ohci_hcd 0000:00:02.2: irq 11, io mem 0xe7000000
[ 1.434238] usb usb1: configuration #1 chosen from 1 choice
[ 1.434339] hub 1-0:1.0: USB hub found
[ 1.434366] hub 1-0:1.0: 3 ports detected
[ 1.434495] ohci_hcd 0000:00:02.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 1.434524] ohci_hcd 0000:00:02.3: OHCI Host Controller
[ 1.434633] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
[ 1.434668] ohci_hcd 0000:00:02.3: irq 11, io mem 0xe6800000
[ 1.490205] usb usb2: configuration #1 chosen from 1 choice
[ 1.490289] hub 2-0:1.0: USB hub found
[ 1.490318] hub 2-0:1.0: 3 ports detected
[ 1.490453] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.490701] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.493579] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.494996] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.495015] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.495027] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.495039] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.495051] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.495235] mice: PS/2 mouse device common for all mice
[ 1.495572] rtc_cmos 00:06: RTC can wake from S4
[ 1.495673] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.495710] rtc0: alarms up to one month, 242 bytes nvram
[ 1.495994] device-mapper: uevent: version 1.0.3
[ 1.496277] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: <email address hidden>
[ 1.496475] device-mapper: multipath: version 1.1.0 loaded
[ 1.496483] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.496809] EISA: Probing bus 0 at eisa.0
[ 1.496825] Cannot allocate resource for EISA slot 1
[ 1.496866] EISA: Detected 0 cards.
[ 1.497071] cpuidle: using governor ladder
[ 1.497212] cpuidle: using governor menu
[ 1.498503] TCP cubic registered
[ 1.498834] NET: Registered protocol family 10
[ 1.499985] lo: Disabled Privacy Extensions
[ 1.500847] NET: Registered protocol family 17
[ 1.500909] Bluetooth: L2CAP ver 2.13
[ 1.500915] Bluetooth: L2CAP socket layer initialized
[ 1.500925] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.500932] Bluetooth: SCO socket layer initialized
[ 1.501017] Bluetooth: RFCOMM TTY layer initialized
[ 1.501026] Bluetooth: RFCOMM socket layer initialized
[ 1.501033] Bluetooth: RFCOMM ver 1.11
[ 1.502650] Using IPI No-Shortcut mode
[ 1.502802] PM: Resume from disk failed.
[ 1.502827] registered taskstats version 1
[ 1.503035] Magic number: 13:303:299
[ 1.503181] rtc_cmos 00:06: setting system clock to 2009-10-31 21:17:01 UTC (1257023821)
[ 1.503189] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.503193] EDD information not available.
[ 1.525055] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.540688] ata1.00: ATA-6: IC25N040ATMR04-0, MO2OAD0A, max UDMA/100
[ 1.540695] ata1.00: 78140160 sectors, multi 16: LBA48
[ 1.556511] ata1.00: configured for UDMA/100
[ 1.556724] scsi 0:0:0:0: Direct-Access ATA IC25N040ATMR04-0 MO2O PQ: 0 ANSI: 5
[ 1.556971] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.557051] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.557142] sd 0:0:0:0: [sda] Write Protect is off
[ 1.557149] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.557196] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.557445] sda: sda1 sda2 < sda5 >
[ 1.611822] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.723678] Freeing unused kernel memory: 540k freed
[ 1.724510] Write protecting the kernel text: 4568k
[ 1.724558] Write protecting the kernel read-only data: 1836k
[ 1.808062] Clocksource tsc unstable (delta = 152620964 ns)
[ 2.170019] Linux agpgart interface v0.103
[ 2.175795] agpgart-sis 0000:00:00.0: SiS chipset [1039/0650]
[ 2.189360] Floppy drive(s): fd0 is 1.44M
[ 2.195825] sis900.c: v1.08.10 Apr. 2 2006
[ 2.232248] FDC 0 is a National Semiconductor PC87306
[ 2.333874] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 2.334651] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 2.334661] sis900 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 2.336006] 0000:00:03.0: ICS LAN PHY transceiver found at address 1.
[ 2.349932] 0000:00:03.0: Using transceiver found at address 1 as default
[ 2.425198] eth0: SiS 900 PCI Fast Ethernet at 0xa000, IRQ 11, 00:0c:6e:69:1b:e6
[ 2.425758] ohci1394 0000:00:0a.2: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 2.482062] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[e5800000-e58007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.788330] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800030bb1c8]
[ 5.143534] PM: Starting manual resume from disk
[ 5.143544] PM: Resume from partition 8:5
[ 5.143548] PM: Checking hibernation image.
[ 5.143811] PM: Resume from disk failed.
[ 5.203124] kjournald starting. Commit interval 5 seconds
[ 5.203163] EXT3-fs: mounted filesystem with writeback data mode.
[ 5.796069] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 6.012240] usb 1-1: configuration #1 chosen from 1 choice
[ 6.039633] Initializing USB Mass Storage driver...
[ 6.039827] scsi2 : SCSI emulation for USB Mass Storage devices
[ 6.040290] usbcore: registered new interface driver usb-storage
[ 6.040299] USB Mass Storage support registered.
[ 6.040596] usb-storage: device found at 2
[ 6.040601] usb-storage: waiting for device to settle before scanning
[ 6.717030] type=1505 audit(1257023826.712:2): operation="profile_load" pid=388 name=/usr/share/gdm/guest-session/Xsession
[ 6.759520] type=1505 audit(1257023826.752:3): operation="profile_load" pid=389 name=/sbin/dhclient3
[ 6.760493] type=1505 audit(1257023826.756:4): operation="profile_load" pid=389 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 6.760998] type=1505 audit(1257023826.756:5): operation="profile_load" pid=389 name=/usr/lib/connman/scripts/dhclient-script
[ 6.828707] type=1505 audit(1257023826.824:6): operation="profile_load" pid=390 name=/usr/bin/evince
[ 6.843923] type=1505 audit(1257023826.836:7): operation="profile_load" pid=390 name=/usr/bin/evince-previewer
[ 6.857500] type=1505 audit(1257023826.852:8): operation="profile_load" pid=390 name=/usr/bin/evince-thumbnailer
[ 6.907827] type=1505 audit(1257023826.900:9): operation="profile_load" pid=392 name=/usr/bin/freshclam
[ 6.913384] type=1505 audit(1257023826.908:10): operation="profile_load" pid=393 name=/usr/lib/cups/backend/cups-pdf
[ 6.914468] type=1505 audit(1257023826.908:11): operation="profile_load" pid=393 name=/usr/sbin/cupsd
[ 8.633331] Adding 1060248k swap on /dev/sda5. Priority:-1 extents:1 across:1060248k
[ 9.895833] EXT3 FS on sda1, internal journal
[ 11.041227] usb-storage: device scan complete
[ 11.048204] scsi 2:0:0:0: Direct-Access Philips GoGear SA19xx 0100 PQ: 0 ANSI: 4
[ 11.049026] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 11.059167] sd 2:0:0:0: [sdb] 478592 4096-byte logical blocks: (1.96 GB/1.82 GiB)
[ 11.066201] sd 2:0:0:0: [sdb] Write Protect is off
[ 11.066212] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 11.066218] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 11.085186] sd 2:0:0:0: [sdb] 478592 4096-byte logical blocks: (1.96 GB/1.82 GiB)
[ 11.092154] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 11.092167] sdb: sdb1
[ 11.125183] sd 2:0:0:0: [sdb] 478592 4096-byte logical blocks: (1.96 GB/1.82 GiB)
[ 11.132159] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 11.132171] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 12.190596] udev: starting version 147
[ 16.769102] irda_init()
[ 16.769130] NET: Registered protocol family 23
[ 16.779147] lp: driver loaded but no devices found
[ 17.067286] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.701066] parport_pc 00:0a: reported by Plug and Play ACPI
[ 17.701192] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 17.796370] lp0: using parport0 (interrupt-driven).
[ 18.944625] asus_laptop: Asus Laptop Support version 0.42
[ 18.961000] asus_laptop: M2E model detected
[ 18.961272] input: Asus Laptop extra buttons as /devices/virtual/input/input6
[ 19.138218] Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
[ 19.147303] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 19.147355] nsc-ircc, chip->init
[ 19.147369] nsc-ircc, Found chip at base=0x02e
[ 19.147402] nsc-ircc, driver loaded (Dag Brattli)
[ 19.147416] nsc_ircc_open(), can't get iobase of 0x2f8
[ 19.147455] nsc-ircc, Found chip at base=0x02e
[ 19.147488] nsc-ircc, driver loaded (Dag Brattli)
[ 19.147495] nsc_ircc_open(), can't get iobase of 0x2f8
[ 19.147935] nsc-ircc 00:0b: disabled
[ 19.164918] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
[ 19.164930] ACPI: I/O resource 0000:00:02.1 [0xe600-0xe61f] conflicts with ACPI region SM00 [0xe600-0xe609]
[ 19.164938] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.164953] sis96x_smbus: probe of 0000:00:02.1 failed with error -16
[ 19.175817] ppdev: user-space parallel port driver
[ 19.192852] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 19.418127] __ratelimit: 6 callbacks suppressed
[ 19.418135] type=1505 audit(1257023839.412:14): operation="profile_replace" pid=733 name=/usr/share/gdm/guest-session/Xsession
[ 19.422052] type=1505 audit(1257023839.416:15): operation="profile_replace" pid=734 name=/sbin/dhclient3
[ 19.422980] type=1505 audit(1257023839.416:16): operation="profile_replace" pid=734 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 19.423490] type=1505 audit(1257023839.416:17): operation="profile_replace" pid=734 name=/usr/lib/connman/scripts/dhclient-script
[ 19.435545] type=1505 audit(1257023839.428:18): operation="profile_replace" pid=736 name=/usr/bin/evince
[ 19.458040] type=1505 audit(1257023839.452:19): operation="profile_replace" pid=736 name=/usr/bin/evince-previewer
[ 19.467159] type=1505 audit(1257023839.460:20): operation="profile_replace" pid=736 name=/usr/bin/evince-thumbnailer
[ 19.482389] type=1505 audit(1257023839.476:21): operation="profile_replace" pid=738 name=/usr/bin/freshclam
[ 19.493272] type=1505 audit(1257023839.488:22): operation="profile_replace" pid=739 name=/usr/lib/cups/backend/cups-pdf
[ 19.494362] type=1505 audit(1257023839.488:23): operation="profile_replace" pid=739 name=/usr/sbin/cupsd
[ 19.967369] yenta_cardbus 0000:00:0a.0: CardBus bridge found [1043:1687]
[ 20.092499] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0438, PCI irq 11
[ 20.092509] yenta_cardbus 0000:00:0a.0: Socket status: 30000006
[ 20.092832] yenta_cardbus 0000:00:0a.1: CardBus bridge found [1043:1687]
[ 20.220823] yenta_cardbus 0000:00:0a.1: ISA IRQ mask 0x0438, PCI irq 11
[ 20.220832] yenta_cardbus 0000:00:0a.1: Socket status: 30000006
[ 20.450894] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.766477] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 20.768891] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 20.769715] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 20.770441] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 20.771437] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 21.006045] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
[ 21.008088] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 21.008912] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 21.009639] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 21.010631] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 23.078536] Intel ICH 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 23.400065] intel8x0_measure_ac97_clock: measured 52283 usecs (2515 samples)
[ 23.400073] intel8x0: clocking to 48000
[ 35.441847] eth0: Media Link Off
[ 35.441982] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 40.065874] ttyS1: LSR safety check engaged!
[ 2096.941238] usb 1-1: USB disconnect, address 2
[ 2561.443525] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 2566.000062] ------------[ cut here ]------------
[ 2566.000092] WARNING: at /build/buildd/linux-2.6.31/net/sched/sch_generic.c:246 dev_watchdog+0x1f6/0x210()
[ 2566.000101] Hardware name: M2000E
[ 2566.000109] NETDEV WATCHDOG: eth0 (sis900): transmit queue 0 timed out
[ 2566.000116] Modules linked in: nls_iso8859_1 nls_cp437 vfat fat binfmt_misc snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device iptable_filter snd pcmcia ip_tables joydev soundcore yenta_socket x_tables ppdev i2c_sis96x snd_page_alloc asus_laptop rsrc_nonstatic psmouse parport_pc shpchp lp irda pcmcia_core serio_raw crc_ccitt led_class parport usb_storage ohci1394 ieee1394 sis900 mii floppy sis_agp agpgart
[ 2566.000223] Pid: 0, comm: swapper Tainted: G W 2.6.31-14-generic #48-Ubuntu
[ 2566.000231] Call Trace:
[ 2566.000253] [<c014518d>] warn_slowpath_common+0x6d/0xa0
[ 2566.000267] [<c04b07c6>] ? dev_watchdog+0x1f6/0x210
[ 2566.000279] [<c04b07c6>] ? dev_watchdog+0x1f6/0x210
[ 2566.000293] [<c0145206>] warn_slowpath_fmt+0x26/0x30
[ 2566.000305] [<c04b07c6>] dev_watchdog+0x1f6/0x210
[ 2566.000323] [<c0157fdb>] ? insert_work+0x5b/0xa0
[ 2566.000338] [<c0127c38>] ? default_spin_lock_flags+0x8/0x10
[ 2566.000354] [<c05707da>] ? _spin_lock_irqsave+0x2a/0x40
[ 2566.000368] [<c0158371>] ? __queue_work+0x31/0x40
[ 2566.000380] [<c01501b7>] run_timer_softirq+0x117/0x200
[ 2566.000393] [<c04b05d0>] ? dev_watchdog+0x0/0x210
[ 2566.000409] [<c014b3b0>] __do_softirq+0x90/0x1a0
[ 2566.000421] [<c0127c38>] ? default_spin_lock_flags+0x8/0x10
[ 2566.000433] [<c05707da>] ? _spin_lock_irqsave+0x2a/0x40
[ 2566.000449] [<c0106b92>] ? enable_8259A_irq+0x42/0x60
[ 2566.000461] [<c014b4fd>] do_softirq+0x3d/0x40
[ 2566.000473] [<c014b63d>] irq_exit+0x5d/0x70
[ 2566.000484] [<c0104f10>] do_IRQ+0x50/0xc0
[ 2566.000496] [<c01039b0>] common_interrupt+0x30/0x40
[ 2566.000516] [<c0369b02>] ? acpi_idle_enter_simple+0xfd/0x130
[ 2566.000534] [<c0468406>] cpuidle_idle_call+0x76/0xd0
[ 2566.000545] [<c010202c>] cpu_idle+0x8c/0xd0
[ 2566.000561] [<c055e875>] rest_init+0x55/0x60
[ 2566.000578] [<c078e8cd>] start_kernel+0x2e6/0x2ec
[ 2566.000591] [<c078e406>] ? unknown_bootoption+0x0/0x1ab
[ 2566.000605] [<c078e07c>] i386_start_kernel+0x7c/0x83
[ 2566.000613] ---[ end trace a7919e7f17c0a727 ]---
[ 2566.000625] eth0: Transmit timeout, status 00000004 00000000
[ 2566.441017] eth0: Media Link On 100mbps full-duplex
[ 2572.392051] eth0: no IPv6 routers present

Sudo Ispci -vnvn;
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 650/M650 Host [1039:0650] (rev 01)
 Subsystem: ASUSTeK Computer Inc. Device [1043:1612]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 32
 Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
 Capabilities: [c0] AGP version 2.0
  Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
  Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
 Kernel driver in use: agpgart-sis
 Kernel modules: sis-agp

00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) [1039:0001]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 I/O behind bridge: 0000d000-0000dfff
 Memory behind bridge: e7800000-e7ffffff
 Prefetchable memory behind bridge: f0000000-febfffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Kernel modules: shpchp

00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS961 [MuTIOL Media IO] [1039:0961] (rev 10)
 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0

00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller [1039:0016]
 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin B routed to IRQ 0
 Region 4: I/O ports at e600 [size=32]
 Kernel modules: i2c-sis96x

00:02.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07) (prog-if 10)
 Subsystem: ASUSTeK Computer Inc. Device [1043:1689]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 32 (20000ns max), Cache Line Size: 32 bytes
 Interrupt: pin D routed to IRQ 11
 Region 0: Memory at e7000000 (32-bit, non-prefetchable) [size=4K]
 Kernel driver in use: ohci_hcd

00:02.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07) (prog-if 10)
 Subsystem: ASUSTeK Computer Inc. Device [1043:1689]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 32 (20000ns max), Cache Line Size: 32 bytes
 Interrupt: pin D routed to IRQ 11
 Region 0: Memory at e6800000 (32-bit, non-prefetchable) [size=4K]
 Kernel driver in use: ohci_hcd

00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev d0) (prog-if 80 [Master])
 Subsystem: ASUSTeK Computer Inc. Device [1043:1688]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 128
 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
 Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
 Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
 Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
 Region 4: I/O ports at b800 [size=16]
 Kernel driver in use: pata_sis

00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] AC'97 Sound Controller [1039:7012] (rev a0)
 Subsystem: ASUSTeK Computer Inc. Device [1043:1663]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 32 (13000ns min, 2750ns max)
 Interrupt: pin C routed to IRQ 11
 Region 0: I/O ports at a800 [size=256]
 Region 1: I/O ports at a400 [size=128]
 Capabilities: [48] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: Intel ICH
 Kernel modules: snd-intel8x0

00:03.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 90)
 Subsystem: ASUSTeK Computer Inc. Device [1043:1455]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 32 (13000ns min, 2750ns max)
 Interrupt: pin A routed to IRQ 11
 Region 0: I/O ports at a000 [size=256]
 Region 1: Memory at e6000000 (32-bit, non-prefetchable) [size=4K]
 [virtual] Expansion ROM at 28000000 [disabled] [size=128K]
 Capabilities: [40] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: sis900
 Kernel modules: sis900

00:0a.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev a8)
 Subsystem: ASUSTeK Computer Inc. Device [1043:1687]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 168
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at 28020000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
 Memory window 0: 18000000-1bfff000 (prefetchable)
 Memory window 1: 1c000000-1ffff000
 I/O window 0: 00001000-000010ff
 I/O window 1: 00001400-000014ff
 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
 16-bit legacy interface ports at 0001
 Kernel driver in use: yenta_cardbus
 Kernel modules: yenta_socket

00:0a.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev a8)
 Subsystem: ASUSTeK Computer Inc. Device [1043:1687]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 168
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at 28021000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
 Memory window 0: 20000000-23fff000 (prefetchable)
 Memory window 1: 24000000-27fff000
 I/O window 0: 00001800-000018ff
 I/O window 1: 00001c00-00001cff
 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
 16-bit legacy interface ports at 0001
 Kernel driver in use: yenta_cardbus
 Kernel modules: yenta_socket

00:0a.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (prog-if 10)
 Subsystem: ASUSTeK Computer Inc. Device [1043:1687]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 32 (500ns min, 1000ns max)
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at e5800000 (32-bit, non-prefetchable) [size=2K]
 Capabilities: [dc] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME+
 Kernel driver in use: ohci1394
 Kernel modules: firewire-ohci, ohci1394

00:0c.0 Communication controller [0780]: Conexant Systems, Inc. HSF 56k HSFi Modem [14f1:2f00] (rev 01)
 Subsystem: Actiontec Electronics Inc Device [1668:8d89]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 32
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at e5000000 (32-bit, non-prefetchable) [size=64K]
 Region 1: I/O ports at 9800 [size=8]
 Capabilities: [40] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter [1039:6325]
 Subsystem: ASUSTeK Computer Inc. Device [1043:1612]
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 11
 BIST result: 00
 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
 Region 1: Memory at e7800000 (32-bit, non-prefetchable) [size=128K]
 Region 2: I/O ports at d800 [size=128]
 Capabilities: [40] Power Management version 1
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [50] AGP version 2.0
  Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
  Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
 Kernel modules: sisfb

ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be restarted.
AplayDevices:
 **** List of PLAYBACK Hardware Devices ****
 card 0: SI7012 [SiS SI7012], device 0: Intel ICH [SiS SI7012]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
Architecture: i386
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: fretplay 1876 F.... pulseaudio
 /dev/snd/seq: timidity 1654 F.... timidity
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
 Card hw:0 'SI7012'/'SiS SI7012 with STAC9721,23 at irq 11'
   Mixer name : 'SigmaTel STAC9721,23'
   Components : 'AC97a:83847609'
   Controls : 31
   Simple ctrls : 21
Date: Sat Oct 31 22:59:58 2009
DistroRelease: Ubuntu 9.10
Failure: oops
HibernationDevice: RESUME=UUID=0220592c-c8f7-4e7b-b29f-5c0a9d55bb44
IwConfig:
 lo no wireless extensions.

 eth0 no wireless extensions.
Lsusb:
 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: ASUSTEK M2000E
Package: linux-image-2.6.31-14-generic 2.6.31-14.48
PccardctlIdent:
 Socket 0:
   no product info available
 Socket 1:
   no product info available
PccardctlStatus:
 Socket 0:
   no card
 Socket 1:
   no card
ProcCmdLine: root=UUID=48a0c7a3-5b0a-4aeb-846f-a955f2a487a4 ro quiet splash
ProcVersionSignature: Ubuntu 2.6.31-14.48-generic
RelatedPackageVersions:
 linux-backports-modules-2.6.31-14-generic N/A
 linux-firmware 1.24
RfKill:

SourcePackage: linux
Tags: kernel-oops
Title: WARNING: at /build/buildd/linux-2.6.31/net/sched/sch_generic.c:246 dev_watchdog+0x1f6/0x210()
Uname: Linux 2.6.31-14-generic i686
WpaSupplicantLog:

XsessionErrors:
 (gnome-settings-daemon:4740): GLib-CRITICAL **: g_propagate_error: assertion `src != NULL' failed
 (gnome-settings-daemon:4740): GLib-CRITICAL **: g_propagate_error: assertion `src != NULL' failed
 (gnome-panel:4754): libglade-WARNING **: Unexpected element <requires-version> inside <glade-interface>.
 (nautilus:4755): Eel-WARNING **: "nautilus-metafile.c: metafiles" hash table still has 2 elements at quit time (keys above)
 (nautilus:4755): Eel-WARNING **: "nautilus-directory.c: directories" hash table still has 2 elements at quit time
dmi.bios.date: 04/14/2003
dmi.bios.vendor: Award Software, Inc.
dmi.bios.version: 0107
dmi.board.name: M2000E
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: REV 1.xx
dmi.chassis.asset.tag: Asset-1234567890
dmi.chassis.type: 7
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version: Chassis Version
dmi.modalias: dmi:bvnAwardSoftware,Inc.:bvr0107:bd04/14/2003:svnASUSTEK:pnM2000E:pvr1.0:rvnASUSTeKComputerINC.:rnM2000E:rvrREV1.xx:cvnChassisManufacture:ct7:cvrChassisVersion:
dmi.product.name: M2000E
dmi.product.version: 1.0
dmi.sys.vendor: ASUSTEK

Revision history for this message
Fretplay (haugesfarm) wrote :
Revision history for this message
Fretplay (haugesfarm) wrote :

Just a comment on the bug; didnt write in the actualy bugrepport what happend;

On startup after upgrading to Ubuntu 9.10 I get a kernel problem repport saying that my system might be unstable if I do not fix this. -Also the computer takes a wery long time to boot. -It looks as on boot that the load screen from my old ubuntu runs first and then the new ubuntu load screen appears, -dont know if this is actualy how it should be, but it just seems vierd to me, as one load screen should be enough in my opinion.

Philip Muškovac (yofel)
summary: - kernel problem -ubuntu 9.10
+ WARNING: at /build/buildd/linux-2.6.31/net/sched/sch_generic.c:246
+ dev_watchdog+0x1f6/0x210()
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.