Comment 6 for bug 654582
Revision history for this message
| Enric Balletbo i Serra (eballetbo) wrote Re: [Bug 654582] Re: 4 LEDs on IGEPv2 board are not initialized/working | #6 |
© 2004
Canonical Ltd.
•
Terms of use
•
Data privacy
•
Contact Launchpad Support
•
Blog
•
Careers
•
System status
•
70fb091
demo site
(Get the code!)
Tested on:
ubuntu@ubuntu:~$ uname -a
Linux ubuntu 2.6.35-
UTC 2010 armv7l GNU/Linux
ubuntu@
gpio-led:green:d0 gpio-led:green:d1 gpio-led:red:d0 gpio-led:red:d1
root@ubuntu:
root@ubuntu:
root@ubuntu:
root@ubuntu:
root@ubuntu:
root@ubuntu:
root@ubuntu:
root@ubuntu:
2010/11/8 Launchpad Bug Tracker <email address hidden>:
> This bug was fixed in the package linux-linaro - 2.6.35-1008.15
>
> ---------------
> linux-linaro (2.6.35-1008.15) maverick-proposed; urgency=low
>
> [ Robert Nelson ]
>
> * SRU: Fix DVI for Beagle xM rev A3
> - LP: #663642
>
> linux-linaro (2.6.35-1008.14) maverick-proposed; urgency=low
>
> [ Andy Whitcroft ]
>
> * reduce disk usage during buildd builds
> - LP: #645653
>
> [ Enric Balletbo i Serra ]
>
> * ARM: igepv2: Adding support for VBUS and overcurrent
> - LP: #651589
> * ARM: igepv2: Fix and improve LED handling
> - LP: #654582
> * ARM: igepv2: Introduce function to dectect HW version
> - LP: #654586
> * ARM: igepv2: Fix handling of GPIOs for WLAN-BT combo
> - LP: #654590
> * ARM: igepv2: Add i2c eeprom driver to read EDID
> - LP: #654594
> * ARM: igepv2: Remove VMMC2 regulator
> - LP: #654595
>
> [ Maurus Cuelenaere ]
>
> * SAUCE: ARM: OMAP3: Add S-Video output to IGEPv2 board
> - LP: #607250
>
> [ Upstream Stable ]
> * Linux 2.6.35.7
>
> [ Upstream MMC updates ]
>
> * mmc: recognize CSD structure
> * mmc: split mmc_sd_init_card()
> * mmc: implement SD-combo (IO+mem) support
> * sdhci: remove useless set_clock() check
> * sdhci: 8-bit data transfer width support
> * sdhci: don't assign mmc->caps at SDHCI directly
> * mmc: only set blockaddressed for > 2GiB cards
> * mmc: omap: fix for bus width which improves SD card's peformance.
> * sdhci-pltfm: switch to module device table matching
> * sdhci-pltfm: reorganize Makefile entries to support SoC devices
> * sdhci-pltfm: add support for CNS3xxx SoC devices
> * omap hsmmc: fix processing of all dma interrupts as block completion
> * sdhci: add regulator support
> * sdhci: add no hi-speed bit quirk support
> * mmc: avoid getting CID on SDIO-only cards
> * omap_hsmmc: remove unused local `state'
> * omap hsmmc: fix a racing case between kmmcd and omap_hsmmc_suspend
> * drivers/
> * mmc: sdhci-pltfm: Add structure for host-specific data
> * mmc: sdhci-pltfm: move .h file into appropriate subdir
> * mmc: sdhci: introduce get_ro private write-protect hook
> * mmc: sdhci_pltfm: pass more data on custom init call
> * mmc: sdhci-of-esdhc: factor out common stuff
> * mmc: sdhci-pltfm: add -pltfm driver for imx35/51
> * mmc: quirk fix for timeout problem
> * babbage: esdhc device registration
> * babbage: update mx51_defconfig
> - LP: #656966
>
>
> [ Upstream ARM fixes ]
>
> * Make PTRACE_SINGLESTEP work with user helpers
> * ARM: fix section mismatch warnings in Versatile Express
> * ARM: use memblock to remove memory from available memory
> * video: omap: vram: remove from normal memory
> - LP: #627779
>
> [ John Rigby ]
> * LINARO: update configs
> - LP: #659799
>
> linux-linaro (2.6.35-1007.13) maverick; urgency=low
>
> [ Upstream Ubuntu ]
>
> * Ubuntu-2.6.35-22.33
> * Ubuntu-2.6.35-22.34
>
> [ Upstream ARM Fixes ]
>
> * ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
> * ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
> * ARM: add a vma entry for the user accessible vector page
> * ARM: plug a race with the alignment trap handler
> * arm: fix really nasty sigreturn bug
> * ARM: prevent multiple syscall restarts
> * ARM: 6387/1: errata: check primary part ID in proc-v7.S
> * ARM: 6388/1: errata: DMB operation may be faulty
> * ARM: 6389/1: errata: incorrect hazard handling in the SCU may lead to
> data corruption
> * ARM: 6398/1: add proc info for ARM11MPCore/
> * kconfig: delay symbol direct dependency initialization
> * ARM: kprobes-decode: add support for MOVW instruction
> * ARM: errata: check primary part ID in proc-v7.S
> * ARM: errata: DMB operation may be faulty
> * ARM: errata: incorrect hazard handling in the SCU may lead to data
> corruption
> * ARM: errata: faulty hazard checking in the Store Buffer may lead to
> data corruption
> * ARM: Fix HWCAP_TLS flag for ARM11MPCore/
>
> [ Ricardo Salveti ]
> * ARM: OMAP3: Add S-Video output to IGEPv2 board
> - LP: #607250
> * ARM: OMAP3: Adding vdd_sdi regulator supply to IGEPv2 board
> - LP: #607250
>
> [ Upstream Stable Releases ]
> * 2.6.35.5
> * 2.6.35.6
>
> [ Upstream ftrace support ]
>
> * ARM: 6312/1: ftrace: allow building without frame pointers
> * ARM: 6314/1: ftrace: allow build without frame pointers on ARM
> * ARM: 6315/1: ftrace: add ENDPROC annotations
> * ARM: 6316/1: ftrace: add Thumb-2 support
> * ARM: 6317/1: ftrace: pass KBUILD_CFLAGS to record_mcount.pl
> * ARM: 6318/1: ftrace: fix and update dynamic ftrace
> * ARM: 6319/1: ftrace: add Thumb-2 support to dynamic ftrace
> * ARM: 6320/1: ftrace: enable dynamic ftrace
>
> [ Nicolas Pitre ]
>
> * ARM: implement CONFIG_
> /dev/mem
> * ARM: bring SECCOMP behavior in sync with the version in mainline
> * ARM: do not define VMALLOC_END relative to PAGE_OFFSET
>
> [ John Rigby ]
>
> * LINARO: Start new release
> * LINARO: Bump ABI
> * LINARO: update configs
> -- John Rigby <email address hidden> Thu, 21 Oct 2010 11:01:14 -0600
>
> ** Changed in: linux-linaro (Ubuntu Maverick)
> Status: Fix Committed => Fix Released
>
> --
> 4 LEDs on IGEPv2 board are not initialized/working
> https:/
> You received this bug notification because you are a direct subscriber
> of the bug.
>
> Status in “linux-linaro” package in Ubuntu: New
> Status in “linux-linaro” source package in Maverick: Fix Released
>
> Bug description:
> The LEDs on the IGEPv2 board are not working.
>
> To unsubscribe from this bug, go to:
> https:/
>