© 2004
Canonical Ltd.
•
Terms of use
•
Data privacy
•
Contact Launchpad Support
•
Blog
•
Careers
•
System status
•
513534c
demo site
(Get the code!)
Paul, one caveat with the firmware - it won't be reloaded onto cards that are still in a "warm" state and USB cards often retain that status even after a reboot - if you look at dmesg you can usually see a message along the lines of "warm state, firmware not uploaded" on some such.
Before chucking the towel in :) I'd recommend installing the *4.95* firmware, shutting down the PC, unplugging it from the wall and physically removing the usb tuner. Give it a few minutes, plug the tuner back in and turn the PC back on.
Review your dmesg output (dmesg|less) and see if you can find mention of your card - a seach for af90 should find it. See if its uploading the firmware and what version it is.
Then if it all seems ok, move onto tuning.
Cheers,
Lindsay