Comment 19 for bug 939161

take a look at alc861 datasheet , it does not has any hardware playback volume control

can you post the pulseaudio log after fixup the speaker pin ?

>>> 1 sink(s) available.
  * index: 0
 name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
 driver: <module-alsa-card.c>
 flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
 state: SUSPENDED
 suspend cause: IDLE
 priority: 9959
 volume: 0: 100% 1: 100%
         0: 0.00 dB 1: 0.00 dB
         balance 0.00
 base volume: 100%
              0.00 dB
 volume steps: 65537
 muted: no
 current latency: 0.00 ms
 max request: 0 KiB
 max rewind: 0 KiB
 monitor source: 0
 sample spec: s16le 2ch 48000Hz
 channel map: front-left,front-right
              Stereo
 used by: 0
 linked by: 0
 configured latency: 0.00 ms; range is 0.50 .. 341.33 ms
 card: 0 <alsa_card.pci-0000_00_1b.0>
 module: 4
 properties:
  alsa.resolution_bits = "16"
  device.api = "alsa"
  device.class = "sound"
  alsa.class = "generic"
  alsa.subclass = "generic-mix"
  alsa.name = "ALC861 Analog"
  alsa.id = "ALC861 Analog"
  alsa.subdevice = "0"
  alsa.subdevice_name = "subdevice #0"
  alsa.device = "0"
  alsa.card = "0"
  alsa.card_name = "HDA Intel"
  alsa.long_card_name = "HDA Intel at 0xfe0fc000 irq 43"
  alsa.driver_name = "snd_hda_intel"
  device.bus_path = "pci-0000:00:1b.0"
  sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
  device.bus = "pci"
  device.vendor.id = "8086"
  device.vendor.name = "Intel Corporation"
  device.product.name = "N10/ICH 7 Family High Definition Audio Controller"
  device.form_factor = "internal"
  device.string = "front:0"
  device.buffering.buffer_size = "65536"
  device.buffering.fragment_size = "32768"
  device.access_mode = "mmap+timer"
  device.profile.name = "analog-stereo"
  device.profile.description = "Analog Stereo"
  device.description = "Built-in Audio Analog Stereo"
  alsa.mixer_name = "Realtek ALC861"
  alsa.components = "HDA:10ec0861,15840000,00100300 HDA:10573055,10573055,00100700"
  module-udev-detect.discovered = "1"
  device.icon_name = "audio-card-pci"
 ports:
  analog-output-headphones: Headphones (priority 9000, available: no)
   properties:

 active port: <analog-output-headphones>