Comment 0 for bug 1241811

Revision history for this message
Romano Giannetti (romano-giannetti) wrote :

Since the upgrade to 13.10, my laptop stopped mounting the USB devices (and SD cards too) automatically.

Inserting the USB I have in the log:

SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.570340] usb 3-2: new high-speed USB device number 3 using xhci_hcd
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593170] usb 3-2: New USB device found, idVendor=090c, idProduct=1000
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593181] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593187] usb 3-2: Product: Flash Disk
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593192] usb 3-2: Manufacturer: USB
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593196] usb 3-2: SerialNumber: FBF1009232400790
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593492] usb 3-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.593501] usb 3-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
SYS: Oct 18 13:57:38 samsung-romano kernel: [ 167.595232] scsi7 : usb-storage 3-2:1.0
SYS: Oct 18 13:57:38 samsung-romano mtp-probe: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb3/3-2"
SYS: Oct 18 13:57:38 samsung-romano mtp-probe: bus: 3, device: 3 was not an MTP device
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.834382] scsi 7:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.835894] sd 7:0:0:0: Attached scsi generic sg3 type 0
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.836227] sd 7:0:0:0: [sdc] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB)
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.836910] sd 7:0:0:0: [sdc] Write Protect is off
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.836926] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.837665] sd 7:0:0:0: [sdc] No Caching mode page present
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.837676] sd 7:0:0:0: [sdc] Assuming drive cache: write through
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.843552] sd 7:0:0:0: [sdc] No Caching mode page present
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.843562] sd 7:0:0:0: [sdc] Assuming drive cache: write through
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.844609] sdc: sdc1
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.846982] sd 7:0:0:0: [sdc] No Caching mode page present
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.846990] sd 7:0:0:0: [sdc] Assuming drive cache: write through
SYS: Oct 18 13:57:39 samsung-romano kernel: [ 168.846997] sd 7:0:0:0: [sdc] Attached SCSI removable disk

But after that nothing happens. I checked the dconf variables as per https://help.ubuntu.com/community/Mount/USB but it's all correctly set. I can mount the disk by hand:

% sudo mount /dev/sdc1 /mnt
% mount | grep mnt
/dev/sdc1 on /mnt type vfat (rw)

...and it works ok.