Comment 24 for bug 344093

This occurs with a Intel D915GRV and a iHOS104, so I think the issue is with this drive. This board allows me to set the PIO and DMA mode for this drive. Do the error codes have anything to do with those? Here is relevant dmesg and full is attached. Thank you.

[ 4.790284] ata3.00: ATAPI: ATAPI iHOS104, WL0B, max UDMA/100
[ 4.834561] ata3.01: ATA-7: ST3160812AS, 3.AAE, max UDMA/133
[ 4.834566] ata3.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.870221] ata3.00: configured for UDMA/100
[ 4.942842] ata3.01: configured for UDMA/133
[ 5.320012] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 5.501487] usb 2-2: configuration #1 chosen from 1 choice
[ 9.940020] ata3.00: qc timeout (cmd 0xa0)
[ 9.940027] ata3.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 10.200210] ata3.00: configured for UDMA/100
[ 10.273677] ata3.01: configured for UDMA/133
[ 15.270018] ata3.00: qc timeout (cmd 0xa0)
[ 15.270025] ata3.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 15.270029] ata3.00: limiting speed to UDMA/100:PIO3
[ 15.530210] ata3.00: configured for UDMA/100
[ 15.604525] ata3.01: configured for UDMA/133
[ 20.600018] ata3.00: qc timeout (cmd 0xa0)
[ 20.600024] ata3.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 20.600027] ata3.00: disabled
[ 20.600044] ata3: soft resetting link
[ 20.902055] ata3.01: configured for UDMA/133
[ 20.902060] ata3: EH complete