OK. I followed the instructions given on the page referenced above. It generated several errors. I cleaned up what looked like a coding error.
I then also had to run ./configure first before make, contrary to the instructions before a makefile was even provided. I then ran make and got the following again:
I then corrected another coding error by adding another left-facing bracket where one should have been but wasn't. Ran make again. This time there were not errors generated. I am about to run make install. Stand by.
Just did it. No errors can be seen so far. I will test the scanner in a moment and give results in separate post.
OK. I followed the instructions given on the page referenced above. It generated several errors. I cleaned up what looked like a coding error.
I then also had to run ./configure first before make, contrary to the instructions before a makefile was even provided. I then ran make and got the following again:
$ make NAME=\" HP\ Linux\ Imaging\ and\ Printing\" -DPACKAGE_ TARNAME= \"hplip\ " -DPACKAGE_ VERSION= \"3.12. 6\" -DPACKAGE_ STRING= \"HP\ Linux\ Imaging\ and\ Printing\ 3.12.6\" -DPACKAGE_ BUGREPORT= \"3.12. 6\" -DPACKAGE_URL=\"\" -DPACKAGE=\"hplip\" -DVERSION= \"3.12. 6\" -DSTDC_HEADERS=1 -DHAVE_ SYS_TYPES_ H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR= \".libs/ \" -DHAVE_LIBDL=1 -DHAVE_PTHREAD_H=1 -DHAVE_JPEGLIB_H=1 -DHAVE_UINT32_T=1 -DHAVE_LIBHPIP=1 -DHAVE_LIBHPIP=1 -DHAVE_LIBCRYPTO=1 -DHAVE_LIBNETSNMP=1 -DHAVE_ NET_SNMP_ NET_SNMP_ CONFIG_ H=1 -DHAVE_ CUPS_CUPS_ H=1 -DHAVE_ LIBUSB_ 1_0_LIBUSB_ H=1 -DHAVE_ PYTHON2_ 7_PYTHON_ H=1 -DHAVE_DBUS=1 -I. -Iip -Iio/hpmud -Iscan/sane -Iprnt/hpijs -I/usr/ include/ dbus-1. 0 -I/usr/ lib64/dbus- 1.0/include -g -O2 -MT libsane_ hpaio_la- bb_ledm. lo -MD -MP -MF .deps/libsane_ hpaio_la- bb_ledm. Tpo -c -o libsane_ hpaio_la- bb_ledm. lo `test -f 'scan/sane/ bb_ledm. c' || echo './'`scan/ sane/bb_ ledm.c NAME=\" HP Linux Imaging and Printing\"" -DPACKAGE_ TARNAME= \"hplip\ " -DPACKAGE_ VERSION= \"3.12. 6\" "-DPACKAGE_ STRING= \"HP Linux Imaging and Printing 3.12.6\"" -DPACKAGE_ BUGREPORT= \"3.12. 6\" -DPACKAGE_URL=\"\" -DPACKAGE=\"hplip\" -DVERSION= \"3.12. 6\" -DSTDC_HEADERS=1 -DHAVE_ SYS_TYPES_ H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR= \".libs/ \" -DHAVE_LIBDL=1 -DHAVE_PTHREAD_H=1 -DHAVE_JPEGLIB_H=1 -DHAVE_UINT32_T=1 -DHAVE_LIBHPIP=1 -DHAVE_LIBHPIP=1 -DHAVE_LIBCRYPTO=1 -DHAVE_LIBNETSNMP=1 -DHAVE_ NET_SNMP_ NET_SNMP_ CONFIG_ H=1 -DHAVE_ CUPS_CUPS_ H=1 -DHAVE_ LIBUSB_ 1_0_LIBUSB_ H=1 -DHAVE_ PYTHON2_ 7_PYTHON_ H=1 -DHAVE_DBUS=1 -I. -Iip -Iio/hpmud -Iscan/sane -Iprnt/hpijs -I/usr/ include/ dbus-1. 0 -I/usr/ lib64/dbus- 1.0/include -g -O2 -MT libsane_ hpaio_la- bb_ledm. lo -MD -MP -MF .deps/libsane_ hpaio_la- bb_ledm. Tpo -c scan/sane/bb_ledm.c -fPIC -DPIC -o .libs/libsane_ hpaio_la- bb_ledm. o bb_ledm. c:23:0: common. h:187:1: warning: 'visibility' attribute ignored on non-class types [-Wattributes] bb_ledm. c: In function 'bb_is_ paper_in_ adf': bb_ledm. c:1081: 1: error: expected declaration or statement at end of input hpaio_la- bb_ledm. lo] Error 1
/bin/sh ./libtool --tag=CC --mode=compile gcc -DPACKAGE_
libtool: compile: gcc "-DPACKAGE_
In file included from scan/sane/
scan/sane/
scan/sane/
scan/sane/
make: *** [libsane_
I then corrected another coding error by adding another left-facing bracket where one should have been but wasn't. Ran make again. This time there were not errors generated. I am about to run make install. Stand by.
Just did it. No errors can be seen so far. I will test the scanner in a moment and give results in separate post.