| 2015-10-04 22:51:13 |
Alan Pope 🍺🐧🐱 🦄 |
description |
Open two windows of an application on Raring
Press Super+W to enable spread.
Observe that the windows shrink vertically and repaint when entering spread and re-expand when leaving spread.
I expect the windows should scale and not repaint or resize when entering or leaving spread.
Test case.
Start a virtualbox VM (with guest additions enabled so desktop resizing is automatic)
Maximise the virtualbox window.
Open a terminal in virtualbox and run the following command:-
watch xrandr
This will show the current resolution (which on my 1080p desktop is 1855x1034) - attached max.png
Enter spread on the host with Super+W
Observe the guest repainting the desktop
Wait a second or two for xrandr to display the new resolution (which on my machine goes to 1855x1006 - a reduction of 28px) - attached spread.png
Exit spread and observe the screen size goes back to what it was before.
ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: compiz 1:0.9.9~daily13.02.08-0ubuntu1
ProcVersionSignature: Ubuntu 3.8.0-5.10-generic 3.8.0-rc6
Uname: Linux 3.8.0-5-generic x86_64
.tmp.unity.support.test.0:
ApportVersion: 2.8-0ubuntu4
Architecture: amd64
CompizPlugins: [core,composite,opengl,compiztoolbox,decor,grid,imgpng,gnomecompat,scale,workarounds,mousepoll,regex,wall,move,place,vpswitch,resize,unitymtgrabhandles,snap,session,expo,ezoom,unityshell]
CompositorRunning: compiz
Date: Mon Feb 11 11:05:19 2013
DistUpgraded: 2013-01-18 10:34:11,775 DEBUG enabling apt cron job
DistroCodename: raring
DistroVariant: ubuntu
DkmsStatus:
vboxhost, 4.2.4, 3.2.0-36-generic, x86_64: installed
vboxhost, 4.2.4, 3.5.0-22-generic, x86_64: installed
vboxhost, 4.2.4, 3.8.0-3-generic, x86_64: installed
vboxhost, 4.2.4, 3.8.0-4-generic, x86_64: installed
vboxhost, 4.2.4, 3.8.0-5-generic, x86_64: installed
EcryptfsInUse: Yes
GraphicsCard:
Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:21da]
InstallationDate: Installed on 2012-06-29 (226 days ago)
InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425)
MachineType: LENOVO 4287CTO
MarkForUpload: True
PackageArchitecture: all
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-5-generic root=UUID=c8438547-b9fb-46af-8012-4663c77c70e7 ro quiet splash vt.handoff=7
SourcePackage: compiz
UpgradeStatus: Upgraded to raring on 2013-01-18 (23 days ago)
dmi.bios.date: 12/05/2012
dmi.bios.vendor: LENOVO
dmi.bios.version: 8DET67WW (1.37 )
dmi.board.asset.tag: Not Available
dmi.board.name: 4287CTO
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: dmi:bvnLENOVO:bvr8DET67WW(1.37):bd12/05/2012:svnLENOVO:pn4287CTO:pvrThinkPadX220:rvnLENOVO:rn4287CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 4287CTO
dmi.product.version: ThinkPad X220
dmi.sys.vendor: LENOVO
version.compiz: compiz 1:0.9.9~daily13.02.08-0ubuntu1
version.ia32-libs: ia32-libs 20090808ubuntu36
version.libdrm2: libdrm2 2.4.42-0ubuntu1
version.libgl1-mesa-dri: libgl1-mesa-dri 9.0.2-0ubuntu1
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 9.0.2-0ubuntu1
version.xserver-xorg-core: xserver-xorg-core 2:1.13.2-0ubuntu2
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.0-0ubuntu1
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.6-0ubuntu2
xserver.bootTime: Mon Feb 11 09:38:59 2013
xserver.configfile: default
xserver.errors:
xserver.logfile: /var/log/Xorg.0.log
xserver.version: 2:1.13.2-0ubuntu2
xserver.video_driver: intel |
Open two windows of an application on Raring
Press Super+W to enable spread.
Observe that the windows shrink vertically and repaint when entering spread and re-expand when leaving spread.
I expect the windows should scale and not repaint or resize when entering or leaving spread.
Test case #1.
Start a virtualbox VM (with guest additions enabled so desktop resizing is automatic)
Maximise the virtualbox window.
Open a terminal in virtualbox and run the following command:-
watch xrandr
This will show the current resolution (which on my 1080p desktop is 1855x1034) - attached max.png
Enter spread on the host with Super+W
Observe the guest repainting the desktop
Wait a second or two for xrandr to display the new resolution (which on my machine goes to 1855x1006 - a reduction of 28px) - attached spread.png
Exit spread and observe the screen size goes back to what it was before.
Test case #2
Open a terminal
Enter the following command in the terminal
watch -d -n 0.5 "tput cols && tput lines"
Maximise the window
Press Super+W
Observe the number of lines is reduced by one when switching to spread, and increases back up again when leaving spread.
ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: compiz 1:0.9.9~daily13.02.08-0ubuntu1
ProcVersionSignature: Ubuntu 3.8.0-5.10-generic 3.8.0-rc6
Uname: Linux 3.8.0-5-generic x86_64
.tmp.unity.support.test.0:
ApportVersion: 2.8-0ubuntu4
Architecture: amd64
CompizPlugins: [core,composite,opengl,compiztoolbox,decor,grid,imgpng,gnomecompat,scale,workarounds,mousepoll,regex,wall,move,place,vpswitch,resize,unitymtgrabhandles,snap,session,expo,ezoom,unityshell]
CompositorRunning: compiz
Date: Mon Feb 11 11:05:19 2013
DistUpgraded: 2013-01-18 10:34:11,775 DEBUG enabling apt cron job
DistroCodename: raring
DistroVariant: ubuntu
DkmsStatus:
vboxhost, 4.2.4, 3.2.0-36-generic, x86_64: installed
vboxhost, 4.2.4, 3.5.0-22-generic, x86_64: installed
vboxhost, 4.2.4, 3.8.0-3-generic, x86_64: installed
vboxhost, 4.2.4, 3.8.0-4-generic, x86_64: installed
vboxhost, 4.2.4, 3.8.0-5-generic, x86_64: installed
EcryptfsInUse: Yes
GraphicsCard:
Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:21da]
InstallationDate: Installed on 2012-06-29 (226 days ago)
InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425)
MachineType: LENOVO 4287CTO
MarkForUpload: True
PackageArchitecture: all
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-5-generic root=UUID=c8438547-b9fb-46af-8012-4663c77c70e7 ro quiet splash vt.handoff=7
SourcePackage: compiz
UpgradeStatus: Upgraded to raring on 2013-01-18 (23 days ago)
dmi.bios.date: 12/05/2012
dmi.bios.vendor: LENOVO
dmi.bios.version: 8DET67WW (1.37 )
dmi.board.asset.tag: Not Available
dmi.board.name: 4287CTO
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: dmi:bvnLENOVO:bvr8DET67WW(1.37):bd12/05/2012:svnLENOVO:pn4287CTO:pvrThinkPadX220:rvnLENOVO:rn4287CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 4287CTO
dmi.product.version: ThinkPad X220
dmi.sys.vendor: LENOVO
version.compiz: compiz 1:0.9.9~daily13.02.08-0ubuntu1
version.ia32-libs: ia32-libs 20090808ubuntu36
version.libdrm2: libdrm2 2.4.42-0ubuntu1
version.libgl1-mesa-dri: libgl1-mesa-dri 9.0.2-0ubuntu1
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 9.0.2-0ubuntu1
version.xserver-xorg-core: xserver-xorg-core 2:1.13.2-0ubuntu2
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.0-0ubuntu1
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.6-0ubuntu2
xserver.bootTime: Mon Feb 11 09:38:59 2013
xserver.configfile: default
xserver.errors:
xserver.logfile: /var/log/Xorg.0.log
xserver.version: 2:1.13.2-0ubuntu2
xserver.video_driver: intel |
|
