enable u-boot spl for riscv64

Probs https://github.com/canonical/cloud-init/pull/687/files is wanted too.

This bug was fixed in the package u-boot - 2020.10+dfsg-1ubuntu3

---------------
u-boot (2020.10+dfsg-1ubuntu3) hirsute; urgency=medium

  * Enable u-boot spl for unleashed. LP: #1905274

 -- Dimitri John Ledkov <email address hidden> Mon, 23 Nov 2020 12:51:03 +0000

This bug was fixed in the package livecd-rootfs - 2.702

---------------
livecd-rootfs (2.702) hirsute; urgency=medium

  [ Sebastien Bacher ]
  * Use the target realpath to do the unmounting
  * Correctly set the environment needed by snapd in layered

  [ Dimitri John Ledkov ]
  * get-ppa-fingerprint: use production instance with latest api.
  * disk-image-uefi: riscv64 add u-boot spl (LP: #1905274)
  * disk-image-uefi: riscv64 add ubuntu:ubuntu login, without expiry.
  * rebuild with the correct version of 2.701 changes.

livecd-rootfs (2.701) hirsute; urgency=medium

  [ Cody Shepherd ]
  * buildd: Create manifests for buildd tarballs

 -- Dimitri John Ledkov <email address hidden> Tue, 24 Nov 2020 18:41:34 +0000

Groovy will not receive these changes. There will not be a point release of groovy to make a new image. Focal images will be provided at next point release which will only be supported to upgrade to hirsute or next LTS.

> Groovy will not receive these changes.

Thank you for making these plans clear.

If, in Focal, someone starts using the u-boot binary directly after this SRU lands, then upgrades to Groovy, won't that regress them? If so, I'm not sure how this fits with SRU policy and will make a note to consult with the wider team. My understanding is that this would normally be a supported use case; hence the usual "must also SRU all subsequent still-supported releases" requirement for feature enablements.

At the moment said binary is used as part of the image building only. And not actually updated on the boot partitions as part of the normal package upgrade.

So their systems will continue to boot, and continue to use whichever uboot was used to create the image, and will work normally with groovy userspace/kernel otherwise.

We don't plan to create any groovy riscv64 images.

The u-boot portions should be fairly easy to sru, but livecd-rootfs and images will still not be built for groovy, as it's non-lts and doesn't have point releases.

Hello Dimitri, or anyone else affected,

Accepted u-boot into groovy-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/u-boot/2020.10+dfsg-1ubuntu0~20.10.1 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed-groovy to verification-done-groovy. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-groovy. In either case, without details of your testing we will not be able to proceed.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping!

N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days.

Hello Dimitri, or anyone else affected,

Accepted u-boot into focal-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/u-boot/2020.10+dfsg-1ubuntu0~20.04.2 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed-focal to verification-done-focal. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-focal. In either case, without details of your testing we will not be able to proceed.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping!

N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days.

verified by cking as working, based on daily images built on cdimage with proposed.

This bug was fixed in the package u-boot - 2020.10+dfsg-1ubuntu0~20.10.1

---------------
u-boot (2020.10+dfsg-1ubuntu0~20.10.1) groovy; urgency=medium

  * SRU of changes through to 2020.10+dfsg-1ubuntu6 to fix Pi4-8GB & CM4 support,
    and add support for risc-v unleashed board:

  [ Dave Jones ]
  * Add d/p/rpi-8gb-pci.patch for Pi400 and Pi4-8Gb support (LP: #1906552)
  * Add d/p/rpi-cm4-sdhci.patch for CM4 eMMC support
  * Add d/p/rpi-maxargs.patch for new Core 18 boot-env (LP: #1910094)
  * Remove redundant d/targets entries

  [ Dimitri John Ledkov ]
  * Enable u-boot spl for unleashed. LP: #1905274

u-boot (2020.10+dfsg-1ubuntu0~20.10) groovy; urgency=low

  * SRU of 2020.10+dfsg-1 to support Raspberry Pi 4 ethernet (LP: #1903054)

  [ Dave Jones ]
  * Merge from Debian unstable. Remaining changes:
    - Enable Ubuntu support for the Nitrogen6x board (LP: #1838064)
      - Add d/p/ubuntu-nitrogen6q2g-config-tweaks.patch to tweak the
        nitrogen6q2g configs to better fit our Ubuntu usage.
      - Start building the nitrogen6x2g target for u-boot.
    - Enable FIT signing support (LP: #1831942)
      - Enable CONFIG_FIT_SIGNATURE so we can sign FIT images.
      - Add libssl-dev to Build-Depends: to enable crypto functionality.
      - Limit key names to keys within the keydir.
    - d/p/rpi-config-tweaks.patch: Configuration adjustments to the RPi
      configs
    - d/p/rpi-board-dt.patch: use the board's device-tree instead of an
      embedded one

  * Removed obsolete patches/changes:
    - d/p/lzo-to-lzno.patch: use gzip instead of lzo compression for FIT
      images as lzop in Ubuntu is in universe. This should be temporary and in
      the next releases ideally we should follow what Debian does.

u-boot (2020.10+dfsg-1) unstable; urgency=medium

  * New upstream release.

u-boot (2020.10~rc5+dfsg-1) experimental; urgency=medium

  [ Vagrant Cascadian ]
  * New upstream release candidate.
  * debian/control: u-boot-qemu: Set Multi-Arch: foreign.

  [ Uwe Kleine-König ]
  * control: Use https for upstream homepage

u-boot (2020.10~rc3+dfsg-1) experimental; urgency=medium

  * New upstream release candidate.
  * debian/patches: Refresh and remove obsolete patches.
  * [armhf] u-boot-sunxi: Add Bananapi_M2_Ultra (Closes: #962931). Thanks
    to Bernhard Wörner.
  * [arm64] u-boot-rockchip: Update rock-pi-4 .dtb names.
  * u-boot-qemu: Build firmware for qemu ppc e500 (Closes: #966624).

u-boot (2020.07+dfsg-2) unstable; urgency=medium

  [ Vagrant Cascadian ]
  * u-boot-install-rockchip: Update with additional RockPro64 names from
    linux 5.7 device-trees.

  [ Denis Pynkin ]
  * u-boot-rpi: Add rpi_arm64 target for arm64 (Closes: #966078).

  [ Vagrant Cascadian ]
  * debian/patches: Fix reproducibility of mx6cuboxi target.

u-boot (2020.07+dfsg-1) unstable; urgency=medium

  * New upstream release.
  * [armhf] u-boot-omap: Drop omap3_pandora, removed upstream.
  * [arm64] u-boot-amlogic: Install new board-specific documentation.
  * debian/patches: Fix riscv64 support for extlinux.
  * debian/control:
    - Upgrade to debhelper compat 13.
    - Update Build-Depends on arm-trusted-firmware.

u-boot (2020.07~rc4+dfsg-1) ex...

The verification of the Stable Release Update for u-boot has completed successfully and the package is now being released to -updates. Subsequently, the Ubuntu Stable Release Updates Team is being unsubscribed and will not receive messages about this bug report. In the event that you encounter a regression using the package from -updates please report a new bug using ubuntu-bug and tag the bug report regression-update so we can easily find any regressions.

This bug was fixed in the package u-boot - 2020.10+dfsg-1ubuntu0~20.04.2

---------------
u-boot (2020.10+dfsg-1ubuntu0~20.04.2) focal; urgency=medium

  * SRU of changes through to 2020.10+dfsg-1ubuntu6 to fix Pi4-8GB & CM4 support,
    and add support for risc-v unleashed board:

  [ Dave Jones ]
  * Add d/p/rpi-8gb-pci.patch for Pi400 and Pi4-8Gb support (LP: #1906552)
  * Add d/p/rpi-cm4-sdhci.patch for CM4 eMMC support
  * Add d/p/rpi-maxargs.patch for new Core 18 boot-env (LP: #1910094)
  * Remove redundant d/targets entries

  [ Dimitri John Ledkov ]
  * Enable u-boot spl for unleashed. LP: #1905274

u-boot (2020.10+dfsg-1ubuntu0~20.04.1) focal; urgency=medium

  * SRU of 2020.10+dfsg-1 to support Raspberry Pi 4 (LP: #1903054)
  * Re-added d/p/lzo-to-lzno.patch as lzop is in universe prior to Groovy
  * Updated d/targets for compatibility with focal arm-trusted-firmware
  * Updated d/control for compatibility with focal debhelper
  * Reinstate rpi-config-migration script for focal

  [ Dave Jones ]
  * Merge from Debian unstable. Remaining changes:
    - Enable Ubuntu support for the Nitrogen6x board (LP: #1838064)
      - Add d/p/ubuntu-nitrogen6q2g-config-tweaks.patch to tweak the
        nitrogen6q2g configs to better fit our Ubuntu usage.
      - Start building the nitrogen6x2g target for u-boot.
    - Enable FIT signing support (LP: #1831942)
      - Enable CONFIG_FIT_SIGNATURE so we can sign FIT images.
      - Add libssl-dev to Build-Depends: to enable crypto functionality.
      - Limit key names to keys within the keydir.
    - d/p/rpi-config-tweaks.patch: Configuration adjustments to the RPi
      configs
    - d/p/rpi-board-dt.patch: use the board's device-tree instead of an
      embedded one

  * Removed obsolete patches/changes:
    - d/p/lzo-to-lzno.patch: use gzip instead of lzo compression for FIT
      images as lzop in Ubuntu is in universe. This should be temporary and in
      the next releases ideally we should follow what Debian does.

u-boot (2020.10+dfsg-1) unstable; urgency=medium

  * New upstream release.

u-boot (2020.10~rc5+dfsg-1) experimental; urgency=medium

  [ Vagrant Cascadian ]
  * New upstream release candidate.
  * debian/control: u-boot-qemu: Set Multi-Arch: foreign.

  [ Uwe Kleine-König ]
  * control: Use https for upstream homepage

u-boot (2020.10~rc3+dfsg-1) experimental; urgency=medium

  * New upstream release candidate.
  * debian/patches: Refresh and remove obsolete patches.
  * [armhf] u-boot-sunxi: Add Bananapi_M2_Ultra (Closes: #962931). Thanks
    to Bernhard Wörner.
  * [arm64] u-boot-rockchip: Update rock-pi-4 .dtb names.
  * u-boot-qemu: Build firmware for qemu ppc e500 (Closes: #966624).

u-boot (2020.07+dfsg-2) unstable; urgency=medium

  [ Vagrant Cascadian ]
  * u-boot-install-rockchip: Update with additional RockPro64 names from
    linux 5.7 device-trees.

  [ Denis Pynkin ]
  * u-boot-rpi: Add rpi_arm64 target for arm64 (Closes: #966078).

  [ Vagrant Cascadian ]
  * debian/patches: Fix reproducibility of mx6cuboxi target.

u-boot (2020.07+dfsg-1) unstable; urgency=medium

  * New upstream release.
  * [armhf] u-boot-omap: Drop omap3_pandora, removed upstream.
  * [arm64] ...