nvme smart error count email after upgrading to 20.04
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
smartmontools |
Unknown
|
Unknown
|
|||
smartmontools (Debian) |
New
|
Unknown
|
|||
smartmontools (Ubuntu) |
Incomplete
|
Low
|
Unassigned |
Bug Description
I just upgraded from 19.10 to 20.04.
I am getting email from smart about errors on the nvme ssds.
If I look in the syslog I see for all nvme devices:
Device: /dev/nvme0, number of Error Log entries increased from 485 to 48
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 8 seconds
but runing smartctl on the device:
Error Information (NVMe Log 0x01, max 64 entries)
No Errors Logged
Email:
This message was generated by the smartd daemon running on:
host name: mike-think
DNS domain: mlb.org
The following warning/error was logged by the smartd daemon:
Device: /dev/nvme0, number of Error Log entries increased from 485 to 488This message was generated by the smartd daemon running on:
host name: mike-think
DNS domain: mlb.org
The following warning/error was logged by the smartd daemon:
Device: /dev/nvme0, number of Error Log entries increased from 485 to 488
Device info:
SAMSUNG MZVLB2T0HALB-000L7, S/N:S4GCNF0N100119, FW:3M2QEXG7, 2.04 TB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.
The original message about this issue was sent at Mon Mar 30 22:32:48 2020 EDT
Another message will be sent in 24 hours if the problem persists.
Full smartctl -x:smartctl 7.1 2019-12-30 r5022 [x86_64-
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontoo
=== START OF INFORMATION SECTION ===
Model Number: SAMSUNG MZVLB2T0HALB-000L7
Serial Number: S4GCNF0N100119
Firmware Version: 3M2QEXG7
PCI Vendor/Subsystem ID: 0x144d
IEEE OUI Identifier: 0x002538
Total NVM Capacity: 2,048,408,248,320 [2.04 TB]
Unallocated NVM Capacity: 0
Controller ID: 4
Number of Namespaces: 1
Namespace 1 Size/Capacity: 2,048,408,248,320 [2.04 TB]
Namespace 1 Utilization: 22,365,745,152 [22.3 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 002538 8101b7cc7c
Local Time is: Tue May 12 14:43:46 2020 EDT
Firmware Updates (0x16): 3 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 84 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 8.00W - - 0 0 0 0 0 0
1 + 6.30W - - 1 1 1 1 0 0
2 + 3.50W - - 2 2 2 2 0 0
3 - 0.0760W - - 3 3 3 3 210 1200
4 - 0.0050W - - 4 4 4 4 2000 8000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 47 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 4,338,357 [2.22 TB]
Data Units Written: 725,358 [371 GB]
Host Read Commands: 8,501,335
Host Write Commands: 4,632,710
Controller Busy Time: 36
Power Cycles: 223
Power On Hours: 26
Unsafe Shutdowns: 156
Media and Data Integrity Errors: 0
Error Information Log Entries: 488
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 47 Celsius
Temperature Sensor 2: 40 Celsius
Error Information (NVMe Log 0x01, max 64 entries)
No Errors Logged
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: linux-image-generic 5.4.0.29.34
ProcVersionSign
Uname: Linux 5.4.0-29-generic x86_64
NonfreeKernelMo
ApportVersion: 2.20.11-0ubuntu27
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/
/dev/snd/
CasperMD5CheckR
CurrentDesktop: ubuntu:GNOME
Date: Tue May 12 14:34:09 2020
InstallationDate: Installed on 2020-03-30 (42 days ago)
InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017)
MachineType: LENOVO 20QNCTO1WW
ProcEnviron:
TERM=xterm-
PATH=(custom, no user)
XDG_RUNTIME_
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 i915drmfb
ProcKernelCmdLine: BOOT_IMAGE=
RelatedPackageV
linux-
linux-
linux-firmware 1.187
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 01/08/2020
dmi.bios.vendor: LENOVO
dmi.bios.version: N2NET35W (1.20 )
dmi.board.
dmi.board.name: 20QNCTO1WW
dmi.board.vendor: LENOVO
dmi.board.version: SDK0R32862 WIN
dmi.chassis.
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.
dmi.modalias: dmi:bvnLENOVO:
dmi.product.family: ThinkPad P53
dmi.product.name: 20QNCTO1WW
dmi.product.sku: LENOVO_
dmi.product.
dmi.sys.vendor: LENOVO
affects: | linux (Ubuntu) → smartmontools (Ubuntu) |
Changed in smartmontools (Debian): | |
status: | Unknown → New |
Changed in smartmontools (Ubuntu): | |
importance: | Undecided → Low |
This change was made by a bot.