roland@logikaldesktop:~$ cd /usr/src/modules/sl-modem roland@logikaldesktop:/usr/src/modules/sl-modem$ dir debian drivers modem patches ungrab-winmodem roland@logikaldesktop:/usr/src/modules/sl-modem$ sudo module-assistant auto- install sl-modem-source [sudo] password for roland: Updated infos about 1 packages Getting source for kernel version: 2.6.31-9-generic Kernel headers available in /usr/src/linux Creating symlink... Couldn't create the /usr/src/linux symlink! apt-get install build-essential Reading package lists... Done Building dependency tree Reading state information... Done build-essential is already the newest version. The following packages were automatically installed and are no longer required: libwxgtk2.6-dbg python-dbg libwxbase2.6-dbg python2.6-dbg Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up sl-modem-source (2.9.11~20080817-3ubuntu2) ... Adding Module to DKMS build system Error! DKMS tree already contains: sl-modem-2.9.11~20080817 You cannot add the same module/version combo more than once. dpkg: error processing sl-modem-source (--configure): subprocess installed post-installation script returned error exit status 3 Errors were encountered while processing: sl-modem-source E: Sub-process /usr/bin/dpkg returned an error code (1) Done! unpack Extracting the package tarball, /usr/src/sl-modem.tar.bz2, please wait... "/usr/share/modass/packages/default.sh" build KVERS=2.6.31-9-generic KSRC=/usr/src/linux-headers-2.6.31-9-generic KDREV=2.6.31-9.29 kdist_image Done with /usr/src/sl-modem-modules-2.6.31-9- generic_2.9.11~20080817-3ubuntu2+2.6.31-9.29_i386.deb . dpkg -Ei /usr/src/sl-modem-modules-2.6.31-9- generic_2.9.11~20080817-3ubuntu2+2.6.31-9.29_i386.deb Selecting previously deselected package sl-modem-modules-2.6.31-9-generic. (Reading database ... 239499 files and directories currently installed.) Unpacking sl-modem-modules-2.6.31-9-generic (from .../sl-modem- modules-2.6.31-9-generic_2.9.11~20080817-3ubuntu2+2.6.31-9.29_i386.deb) ... Setting up sl-modem-modules-2.6.31-9-generic (2.9.11~20080817-3ubuntu2+2.6.31-9.29) ... WARNING: All config files need .conf: /etc/modprobe.d/sl-modem-daemon.modutils, it will be ignored in a future release. WARNING: All config files need .conf: /etc/modprobe.d/sl-modem-daemon.modutils, it will be ignored in a future release. Starting SmartLink Modem driver for: slamr0. Creating /dev/modem symlink, pointing to: /dev/ttySL0. roland@logikaldesktop:/usr/src/modules/sl-modem$ roland@logikaldesktop:/usr/src/modules/sl-modem$ sudo wvdialconf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S1 S2 S3 WvModem<*1>: Cannot get information for serial port. ttySL0<*1>: ATQ0 V1 E1 -- OK ttySL0<*1>: ATQ0 V1 E1 Z -- OK ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem ttySL0<*1>: Speed 4800: AT -- OK ttySL0<*1>: Speed 9600: AT -- OK ttySL0<*1>: Speed 19200: AT -- OK ttySL0<*1>: Speed 38400: AT -- OK ttySL0<*1>: Speed 57600: AT -- OK ttySL0<*1>: Speed 115200: AT -- OK ttySL0<*1>: Speed 230400: AT -- OK ttySL0<*1>: Speed 460800: AT -- OK ttySL0<*1>: Max speed is 460800; that should be safe. ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found a modem on /dev/ttySL0. Modem configuration written to /etc/wvdial.conf. ttySL0: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" roland@logikaldesktop:/usr/src/modules/sl-modem$ wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Sending: ATDTw16302051593 --> Waiting for carrier. ATDTw16302051593 NO CARRIER ERROR --> No Carrier! Trying again. --> Sending: ATDTw16302051593 --> Waiting for carrier. ATDTw16302051593 NO CARRIER ERROR --> No Carrier! Trying again. --> Sending: ATDTw16302051593 --> Waiting for carrier. ATDTw16302051593 NO CARRIER ERROR Yes, the phone line is plugged in. Yes, I plugged an old fashioned phone into the end of the cable and made certain I had a carrier. On Thursday 03 September 2009 11:39:44 am أحمد المحمودي (Ahmed El-Mahmoudy) wrote: > Could you rather try: > > sudo module-assistant auto-install sl-modem-source > > Please make sure that linux-headers-generic is installed. > -- Roland Hughes, President Logikal Solutions (630)-205-1593 (cell) http://www.theminimumyouneedtoknow.com http://www.infiniteexposure.net http://www.logikalsolutions.com