Settings Power says high hardware temperature

Status changed to 'Confirmed' because the bug affects multiple users.

I'm seeing the same issue on a Dell XPS9570 (intel chipset) - it reports "high hardware temperature" despite all the temperatures are normal/low.

$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +48.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +47.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +47.0°C (high = +100.0°C, crit = +100.0°C)
Core 2: +48.0°C (high = +100.0°C, crit = +100.0°C)
Core 3: +46.0°C (high = +100.0°C, crit = +100.0°C)
Core 4: +48.0°C (high = +100.0°C, crit = +100.0°C)
Core 5: +43.0°C (high = +100.0°C, crit = +100.0°C)

pch_cannonlake-virtual-0
Adapter: Virtual device
temp1: +62.0°C

nvme-pci-3d00
Adapter: PCI adapter
Composite: +29.9°C (low = -273.1°C, high = +80.8°C)
                       (crit = +80.8°C)
Sensor 1: +29.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +32.9°C (low = -273.1°C, high = +65261.8°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1: +25.0°C (crit = +107.0°C)

Could someone having the issue report it upstream on https://gitlab.freedesktop.org/hadess/power-profiles-daemon ?

sounds like the service is reading /sys/devices/system/cpu/intel_pstate/no_turbo , what is the content of that file on your system when seeing the warning?

$ cat /sys/devices/system/cpu/intel_pstate/no_turbo
1

I've solved the issue for my case.

I am running a system upgraded to Ubuntu 21.10 beta and long before we had this nice gnome power-profiles-daemon solution I had been playing with different daemons that would manage the CPU performance and mess with the state of intel_pstate/no_turbo. Daemons that I forgot to remove. After removing both cpufreqd and auto-cpufreq, the state of intel_pstate/no_turbo stopped flipping and the gnome performance power mode started working no longer complaining about high hardware temperature.

Now that it seems to be working, the only annoying bit is that the Gnome performance power mode state is lost across system reboot. Maybe this is by design but I think it should remember whatever state configured by the user - it is a bit silly having to go set the performance mode at every system boot.

It also affects me.

Martin you are running into: https://bugs.launchpad.net/ubuntu/+source/power-profiles-daemon/+bug/1943162

Since they seem to be a problem Nikolai can you confirm cpufreqd and auto-cpufreq are not installed?

If they aren’t installed and you still experience this problem please report it to https://gitlab.freedesktop.org/hadess/power-profiles-daemon as mentioned above.

> the Gnome performance power mode state is lost across system reboot

upstream added support for restoring the state now so it will be in the next version of Ubuntu

@corrado, could you check if one of the previously mentioned cpufreq packages are installed and if so does uninstalling them makes a difference for you?

I can not check, Will be in hospital for a week

Il gio 21 ott 2021, 09:41 Sebastien Bacher <email address hidden> ha
scritto:

> @corrado, could you check if one of the previously mentioned cpufreq
> packages are installed and if so does uninstalling them makes a
> difference for you?
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1942616
>
> Title:
> Settings Power says high hardware temperature
>
> To manage notifications about this bug go to:
>
> https://bugs.launchpad.net/ubuntu/+source/power-profiles-daemon/+bug/1942616/+subscriptions
>
>

I still have the problem, this is a fresh install from Ubuntu 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20211023)
and i don't have the mentioned packages
corrado@corrado-jj-1023:~$ apt policy cpufreqd auto-cpufreq
cpufreqd:
  Installed: (none)
  Candidate: 2.4.2-2ubuntu3
  Version table:
     2.4.2-2ubuntu3 500
        500 http://it.archive.ubuntu.com/ubuntu jammy/universe amd64 Packages
N: Unable to locate package auto-cpufreq
corrado@corrado-jj-1023:~$

Having the same issue, just did a fresh install of ubuntu 21.10 yesterday, and haven't been able to turn on performance mode. Also do not have cpufreqd or auto-cpufreq.

These are my current temps, after running all day

coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +49.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +47.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +48.0°C (high = +100.0°C, crit = +100.0°C)
Core 2: +49.0°C (high = +100.0°C, crit = +100.0°C)
Core 3: +45.0°C (high = +100.0°C, crit = +100.0°C)

pch_skylake-virtual-0
Adapter: Virtual device
temp1: +54.5°C

BAT0-acpi-0
Adapter: ACPI interface
in0: 12.59 V
curr1: 1000.00 uA

ath10k_hwmon-pci-0200
Adapter: PCI adapter
temp1: +45.0°C

dell_smm-virtual-0
Adapter: Virtual device
fan1: 2517 RPM
fan2: 2510 RPM

nvme-pci-0400
Adapter: PCI adapter
Composite: +32.9°C (low = -273.1°C, high = +87.8°C)
                       (crit = +89.8°C)
Sensor 1: +32.9°C (low = -273.1°C, high = -273.1°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1: +25.0°C (crit = +107.0°C)

I've reported the issue to power-profiles-daemon here: https://gitlab.freedesktop.org/hadess/power-profiles-daemon/-/issues/59

The issue upstream had been closed because it seems to be due to thermald being installed. Is that also the case for the original reporter?

Yes, i have thermald installed
corrado@corrado-n4-jj-1107:~$ sudo apt policy thermald
[sudo] password for corrado:
thermald:
  Installed: 2.4.6-3
  Candidate: 2.4.6-3
  Version table:
 *** 2.4.6-3 500
        500 http://archive.ubuntu.com/ubuntu jammy/main amd64 Packages
        100 /var/lib/dpkg/status
corrado@corrado-n4-jj-1107:~$

But thermald is automatically installed also if not present in manifest
thermald/jammy,now 2.4.6-3 amd64 [installed,automatic]
so i believe this bug should not be closed or the bug should be reopened against thermald?

I have solved the issue with the following material available.
https://gitlab.freedesktop.org/hadess/power-profiles-daemon

Testing
If you don't have hardware that can support the performance mode, or the degraded mode
you can manually run the power-profiles-daemon binary as root with the environment
variable POWER_PROFILE_DAEMON_FAKE_DRIVER set to 1. For example:

sudo POWER_PROFILE_DAEMON_FAKE_DRIVER=1 /usr/libexec/power-profiles-daemon -r -v

I confirm the problem on Impish (21.10), and didn't have it on 21.04. While I have indeed Turbo Boost turned off, it shouldn't behave like that for two reasons :

- The message is false, there is no temperature problem.
- On CPUs with hardware-driven P-states (HWP) on, the performance mode of the control panel sets the Energy Performance Preference (EPP) of the CPU to high performance. While maybe not very useful, it's still possible technically to have Turbo Boost off and EPP set to high performance, and I don't see why it shouldn't be possible through Gnome.

I suspect Gnome checks the "no turbo" flag as a thermal trip indicator, which it is not.

But now in Ubuntu 22.04 Settings Power still says 'high hardware temperature: performance mode unavailable' but I can set 'performance'

That's obviously a bug, since it makes the interface inconsistent. However, it would be interesting to know if setting performance on the interface actually changes anything, i.e. sets EPP to high performance.

how can i check if EPP is set?
i see the setting is remembered after new boot so i imagine EPP is set.

opened a bug https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1959491

For me, I do not even see this option. I have only,
Balanced
and
Power Saver

After installing proposed option 'Performance' appears again with the info 'Performance mode temporarily disabled due to high operating temperature' while sensors says:
corrado@corrado-n4-jj-0203:~$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +14.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +13.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +13.0°C (high = +80.0°C, crit = +100.0°C)

nvme-pci-0200
Adapter: PCI adapter
Composite: +19.9°C (low = -0.1°C, high = +74.8°C)
                       (crit = +79.8°C)

pch_skylake-virtual-0
Adapter: Virtual device
temp1: +31.5°C

corrado@corrado-n4-jj-0203:~$

... yes here is a cold winter and my studio is not heated today

The strange thing is that if instead of using 'Settings Power' I use the drop-down menu at the top right I can set 'Performancer' and then I find it also set in 'Settings Power'

Ubuntu 22.04 on a laptop, dual boot with Windows 11; power menu says "Performance mode temporarily disabled due to high operating temperature.", although I can set the performance mode, but has no effect; CPU cores frequencies are always throttled at their base speeds (1.8 GHz); temperature sensors are reading 0k temperatures:

$ lscpu | grep MHz
CPU max MHz: 1800.0000
CPU min MHz: 400.0000

$ cat /sys/class/thermal/thermal_zone*/temp
31500
31000
33000

$ cat /sys/devices/system/cpu/intel_pstate/no_turbo
0

The solution I accidentally came around is to boot Windows, and then restart and boot Ubuntu; don't know why, but it works ¯\_(ツ)_/¯.

$ lscpu | grep MHz # After booting Windows, then rebooting to Ubuntu.
CPU max MHz: 4000.0000
CPU min MHz: 400.0000

Update: got rid of Windows, fresh-installed Ubuntu 22.04, and updated it; CPU cores frequencies are throttled after a cold-boot (boot after a shutdown), but not after a reboot; so, every time I want to use my laptop, I do a restart to take full power.

Does anyone know of a way to automate both turning on power options for unsupported computers AND toggling Performance on? It's tedious to keep running the power-profiles-dameon every time I start my PC, I have to keep the terminal window open, and even then, I must manually toggle from the default Balanced mode to Performance mode.

I'm on Ubuntu 23.04 in Performance mode. When I run heavy tasks (machine learning) using my Nvidia GPU, CPU temperatures go around 90C, I get the "Performance mode temporarily disabled ..." and cpufreq-info displays:

  driver: intel_pstate
  CPUs which run at the same hardware frequency: 19
  CPUs which need to have their frequency coordinated by software: 19
  maximum transition latency: 4294.55 ms.
  hardware limits: 400 MHz - 3.60 GHz
  available cpufreq governors: performance, powersave
  current policy: frequency should be within 400 MHz and 1.30 GHz.
                  The governor "powersave" may decide which speed to use
                  within this range.
  current CPU frequency is 2.00 GHz.

So far so good, the problem is that, after cooling down and resting with no stress at all, it never resets to normal state. It keeps the temperature throttle indefinitely as if the computer was in full-charge. Only a reset fixes the problem, until I run another heavy task...

This bug affects me too. Performance mode is temporarily disabled due to high operating temperature.
The CPU temperature is 40°C.

Ubuntu version: 23.10

I also have this problem with Kubuntu: 23.04 on a Dell Precision 5750

The message in Kubuntu Plasma is "Performance may be reduced because the computer is running too hot"

Update: not sure what fixed it, but I booted into Windows + turned Intel Turbo On in the BIOS for now the speed is higher + the warning disappeared.