2012-01-23 07:54:12 |
Timo Aaltonen |
bug |
|
|
added bug |
2012-01-23 07:54:29 |
Timo Aaltonen |
bug watch added |
|
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=641886 |
|
2012-01-23 07:54:29 |
Timo Aaltonen |
bug task added |
|
mdadm (Debian) |
|
2012-01-23 08:41:40 |
Bug Watch Updater |
mdadm (Debian): status |
Unknown |
Fix Released |
|
2012-02-07 21:22:51 |
Launchpad Janitor |
mdadm (Ubuntu): status |
New |
Confirmed |
|
2012-02-07 21:23:10 |
nutznboltz |
bug |
|
|
added subscriber nutznboltz |
2012-02-07 21:25:33 |
nutznboltz |
summary |
noise from /etc/cron.daily/mdadm |
/etc/cron.daily/mdadm fails if mdadm monitor daemon is already running |
|
2012-02-07 21:32:06 |
nutznboltz |
description |
/etc/cron.daily/mdadm:
mdadm: Only one autorebuild process allowed in scan mode, aborting
run-parts: /etc/cron.daily/mdadm exited with return code 1
fixed in Debian, please merge from them. |
Reproducing:
1. Install Ubuntu 12.04 with md raid.
My system has:
$ cat /proc/mdstat
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10]
md1 : active raid1 sdb2[1] sda2[0]
522048 blocks [2/2] [UU]
md0 : active raid1 sdb1[1] sda1[0]
10490304 blocks [2/2] [UU]
md2 : active raid1 sdc1[0] sdd1[1]
805305143 blocks super 1.2 [2/2] [UU]
unused devices: <none>
2. Try running this mdadm command, observe unexpected results:
# mdadm --monitor --scan --oneshot
mdadm: Only one autorebuild process allowed in scan mode, aborting
3. Also cron will send mail:
/etc/cron.daily/mdadm:
mdadm: Only one autorebuild process allowed in scan mode, aborting
run-parts: /etc/cron.daily/mdadm exited with return code 1
4. Stop any mdadm processes (but only for testing, it is unacceptable to turn off mdadm monitoring.)
# service mdadm stop
5. Try running, observe expected results:
# mdadm --monitor --scan --oneshot
(no output)
This issue was fixed in Debian, please d-i this version:
Format: 1.8
Date: Wed, 18 Jan 2012 22:33:01 +0400
Source: mdadm
Binary: mdadm mdadm-udeb
Architecture: source i386
Version: 3.2.3-2
Distribution: unstable
Urgency: low
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Changed-By: Michael Tokarev <mjt@tls.msk.ru>
Description:
mdadm - tool to administer Linux MD arrays (software RAID)
mdadm-udeb - tool to administer Linux MD arrays (software RAID) (udeb)
Closes: 607375 628667 633880 637068 641584 641886 641972 645563 650630 651737 651880 652547 655212
Changes:
mdadm (3.2.3-2) unstable; urgency=low
.
[ Michael Tokarev ]
* new upstream bugfix/stable version, with lots of fixes all over.
Closes: #641886, #628667, #645563, #651880, #607375, #633880
* update Neil's email (Closes: #650630)
* update mdadd.sh to version 1.52 (Closes: #655212)
* fixed a typo (RAID6 vs RAID10) in FAQ (Closes: #637068)
* declare ordering dependency for multipath-tools-boot in
mdadm-raid init script (Closes: #641584)
While at it, remove mention of devfsd
* added Slovak (sk.po) po-debconf translation from Slavko <linux@slavino.sk>
(Closes: #641972)
* set nice value of the check/resync thread too, together with I/O
scheduling class, based on patch by Sergey B Kirpichev (Closes: #652547)
* small changes for debian/checkarray
* (internal) move files from contrib/* topgit branches into debian directory
* remove dh_testroot from clean target
* add myself to uploaders
.
[ Peter Eisentraut ]
* Added support for "status" action to mdadm init script (Closes: #651737) |
|
2012-02-07 21:32:18 |
nutznboltz |
tags |
|
testcase |
|
2012-02-07 21:34:44 |
nutznboltz |
tags |
testcase |
precise testcase |
|
2012-02-07 21:45:53 |
nutznboltz |
description |
Reproducing:
1. Install Ubuntu 12.04 with md raid.
My system has:
$ cat /proc/mdstat
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10]
md1 : active raid1 sdb2[1] sda2[0]
522048 blocks [2/2] [UU]
md0 : active raid1 sdb1[1] sda1[0]
10490304 blocks [2/2] [UU]
md2 : active raid1 sdc1[0] sdd1[1]
805305143 blocks super 1.2 [2/2] [UU]
unused devices: <none>
2. Try running this mdadm command, observe unexpected results:
# mdadm --monitor --scan --oneshot
mdadm: Only one autorebuild process allowed in scan mode, aborting
3. Also cron will send mail:
/etc/cron.daily/mdadm:
mdadm: Only one autorebuild process allowed in scan mode, aborting
run-parts: /etc/cron.daily/mdadm exited with return code 1
4. Stop any mdadm processes (but only for testing, it is unacceptable to turn off mdadm monitoring.)
# service mdadm stop
5. Try running, observe expected results:
# mdadm --monitor --scan --oneshot
(no output)
This issue was fixed in Debian, please d-i this version:
Format: 1.8
Date: Wed, 18 Jan 2012 22:33:01 +0400
Source: mdadm
Binary: mdadm mdadm-udeb
Architecture: source i386
Version: 3.2.3-2
Distribution: unstable
Urgency: low
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Changed-By: Michael Tokarev <mjt@tls.msk.ru>
Description:
mdadm - tool to administer Linux MD arrays (software RAID)
mdadm-udeb - tool to administer Linux MD arrays (software RAID) (udeb)
Closes: 607375 628667 633880 637068 641584 641886 641972 645563 650630 651737 651880 652547 655212
Changes:
mdadm (3.2.3-2) unstable; urgency=low
.
[ Michael Tokarev ]
* new upstream bugfix/stable version, with lots of fixes all over.
Closes: #641886, #628667, #645563, #651880, #607375, #633880
* update Neil's email (Closes: #650630)
* update mdadd.sh to version 1.52 (Closes: #655212)
* fixed a typo (RAID6 vs RAID10) in FAQ (Closes: #637068)
* declare ordering dependency for multipath-tools-boot in
mdadm-raid init script (Closes: #641584)
While at it, remove mention of devfsd
* added Slovak (sk.po) po-debconf translation from Slavko <linux@slavino.sk>
(Closes: #641972)
* set nice value of the check/resync thread too, together with I/O
scheduling class, based on patch by Sergey B Kirpichev (Closes: #652547)
* small changes for debian/checkarray
* (internal) move files from contrib/* topgit branches into debian directory
* remove dh_testroot from clean target
* add myself to uploaders
.
[ Peter Eisentraut ]
* Added support for "status" action to mdadm init script (Closes: #651737) |
Reproducing:
1. Install Ubuntu 12.04 with md raid.
My system has:
$ cat /proc/mdstat
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10]
md1 : active raid1 sdb2[1] sda2[0]
522048 blocks [2/2] [UU]
md0 : active raid1 sdb1[1] sda1[0]
10490304 blocks [2/2] [UU]
md2 : active raid1 sdc1[0] sdd1[1]
805305143 blocks super 1.2 [2/2] [UU]
unused devices: <none>
2. Try running this mdadm command, observe unexpected results:
# mdadm --monitor --scan --oneshot
mdadm: Only one autorebuild process allowed in scan mode, aborting
3. Also cron will send mail:
/etc/cron.daily/mdadm:
mdadm: Only one autorebuild process allowed in scan mode, aborting
run-parts: /etc/cron.daily/mdadm exited with return code 1
4. Stop any mdadm processes (but only for testing, it is unacceptable to turn off mdadm monitoring.)
# service mdadm stop
5. Try running, observe expected results:
# mdadm --monitor --scan --oneshot
(no output)
This issue was fixed in Debian, please Debian Import this version:
Format: 1.8
Date: Wed, 18 Jan 2012 22:33:01 +0400
Source: mdadm
Binary: mdadm mdadm-udeb
Architecture: source i386
Version: 3.2.3-2
Distribution: unstable
Urgency: low
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Changed-By: Michael Tokarev <mjt@tls.msk.ru>
Description:
mdadm - tool to administer Linux MD arrays (software RAID)
mdadm-udeb - tool to administer Linux MD arrays (software RAID) (udeb)
Closes: 607375 628667 633880 637068 641584 641886 641972 645563 650630 651737 651880 652547 655212
Changes:
mdadm (3.2.3-2) unstable; urgency=low
.
[ Michael Tokarev ]
* new upstream bugfix/stable version, with lots of fixes all over.
Closes: #641886, #628667, #645563, #651880, #607375, #633880
* update Neil's email (Closes: #650630)
* update mdadd.sh to version 1.52 (Closes: #655212)
* fixed a typo (RAID6 vs RAID10) in FAQ (Closes: #637068)
* declare ordering dependency for multipath-tools-boot in
mdadm-raid init script (Closes: #641584)
While at it, remove mention of devfsd
* added Slovak (sk.po) po-debconf translation from Slavko <linux@slavino.sk>
(Closes: #641972)
* set nice value of the check/resync thread too, together with I/O
scheduling class, based on patch by Sergey B Kirpichev (Closes: #652547)
* small changes for debian/checkarray
* (internal) move files from contrib/* topgit branches into debian directory
* remove dh_testroot from clean target
* add myself to uploaders
.
[ Peter Eisentraut ]
* Added support for "status" action to mdadm init script (Closes: #651737) |
|
2012-02-07 21:50:16 |
nutznboltz |
summary |
/etc/cron.daily/mdadm fails if mdadm monitor daemon is already running |
Please sync mdam 3.2.3-2 from Debian unstable (main) (was: /etc/cron.daily/mdadm fails if mdadm monitor daemon is already running) |
|
2012-02-07 21:55:19 |
nutznboltz |
summary |
Please sync mdam 3.2.3-2 from Debian unstable (main) (was: /etc/cron.daily/mdadm fails if mdadm monitor daemon is already running) |
Please sync mdadm 3.2.3-2 from Debian unstable (main) (was: /etc/cron.daily/mdadm fails if mdadm monitor daemon is already running) |
|
2012-02-08 15:19:48 |
nutznboltz |
description |
Reproducing:
1. Install Ubuntu 12.04 with md raid.
My system has:
$ cat /proc/mdstat
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10]
md1 : active raid1 sdb2[1] sda2[0]
522048 blocks [2/2] [UU]
md0 : active raid1 sdb1[1] sda1[0]
10490304 blocks [2/2] [UU]
md2 : active raid1 sdc1[0] sdd1[1]
805305143 blocks super 1.2 [2/2] [UU]
unused devices: <none>
2. Try running this mdadm command, observe unexpected results:
# mdadm --monitor --scan --oneshot
mdadm: Only one autorebuild process allowed in scan mode, aborting
3. Also cron will send mail:
/etc/cron.daily/mdadm:
mdadm: Only one autorebuild process allowed in scan mode, aborting
run-parts: /etc/cron.daily/mdadm exited with return code 1
4. Stop any mdadm processes (but only for testing, it is unacceptable to turn off mdadm monitoring.)
# service mdadm stop
5. Try running, observe expected results:
# mdadm --monitor --scan --oneshot
(no output)
This issue was fixed in Debian, please Debian Import this version:
Format: 1.8
Date: Wed, 18 Jan 2012 22:33:01 +0400
Source: mdadm
Binary: mdadm mdadm-udeb
Architecture: source i386
Version: 3.2.3-2
Distribution: unstable
Urgency: low
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Changed-By: Michael Tokarev <mjt@tls.msk.ru>
Description:
mdadm - tool to administer Linux MD arrays (software RAID)
mdadm-udeb - tool to administer Linux MD arrays (software RAID) (udeb)
Closes: 607375 628667 633880 637068 641584 641886 641972 645563 650630 651737 651880 652547 655212
Changes:
mdadm (3.2.3-2) unstable; urgency=low
.
[ Michael Tokarev ]
* new upstream bugfix/stable version, with lots of fixes all over.
Closes: #641886, #628667, #645563, #651880, #607375, #633880
* update Neil's email (Closes: #650630)
* update mdadd.sh to version 1.52 (Closes: #655212)
* fixed a typo (RAID6 vs RAID10) in FAQ (Closes: #637068)
* declare ordering dependency for multipath-tools-boot in
mdadm-raid init script (Closes: #641584)
While at it, remove mention of devfsd
* added Slovak (sk.po) po-debconf translation from Slavko <linux@slavino.sk>
(Closes: #641972)
* set nice value of the check/resync thread too, together with I/O
scheduling class, based on patch by Sergey B Kirpichev (Closes: #652547)
* small changes for debian/checkarray
* (internal) move files from contrib/* topgit branches into debian directory
* remove dh_testroot from clean target
* add myself to uploaders
.
[ Peter Eisentraut ]
* Added support for "status" action to mdadm init script (Closes: #651737) |
Reproducing:
1. Install Ubuntu 12.04 with md raid.
My system has:
$ cat /proc/mdstat
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10]
md1 : active raid1 sdb2[1] sda2[0]
522048 blocks [2/2] [UU]
md0 : active raid1 sdb1[1] sda1[0]
10490304 blocks [2/2] [UU]
md2 : active raid1 sdc1[0] sdd1[1]
805305143 blocks super 1.2 [2/2] [UU]
unused devices: <none>
2. Try running this mdadm command, observe unexpected results:
# mdadm --monitor --scan --oneshot
mdadm: Only one autorebuild process allowed in scan mode, aborting
3. Also cron will send mail:
/etc/cron.daily/mdadm:
mdadm: Only one autorebuild process allowed in scan mode, aborting
run-parts: /etc/cron.daily/mdadm exited with return code 1
Because when you install the mdadm package this crontab file is created:
$ dpkg -S /etc/cron.daily/mdadm
mdadm: /etc/cron.daily/mdadm
4. Stop any mdadm processes (but only for testing, it is unacceptable to turn off mdadm monitoring.)
# service mdadm stop
5. Try running, observe expected results:
# mdadm --monitor --scan --oneshot
(no output)
This issue was fixed in Debian, please Debian Import this version:
Format: 1.8
Date: Wed, 18 Jan 2012 22:33:01 +0400
Source: mdadm
Binary: mdadm mdadm-udeb
Architecture: source i386
Version: 3.2.3-2
Distribution: unstable
Urgency: low
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Changed-By: Michael Tokarev <mjt@tls.msk.ru>
Description:
mdadm - tool to administer Linux MD arrays (software RAID)
mdadm-udeb - tool to administer Linux MD arrays (software RAID) (udeb)
Closes: 607375 628667 633880 637068 641584 641886 641972 645563 650630 651737 651880 652547 655212
Changes:
mdadm (3.2.3-2) unstable; urgency=low
.
[ Michael Tokarev ]
* new upstream bugfix/stable version, with lots of fixes all over.
Closes: #641886, #628667, #645563, #651880, #607375, #633880
* update Neil's email (Closes: #650630)
* update mdadd.sh to version 1.52 (Closes: #655212)
* fixed a typo (RAID6 vs RAID10) in FAQ (Closes: #637068)
* declare ordering dependency for multipath-tools-boot in
mdadm-raid init script (Closes: #641584)
While at it, remove mention of devfsd
* added Slovak (sk.po) po-debconf translation from Slavko <linux@slavino.sk>
(Closes: #641972)
* set nice value of the check/resync thread too, together with I/O
scheduling class, based on patch by Sergey B Kirpichev (Closes: #652547)
* small changes for debian/checkarray
* (internal) move files from contrib/* topgit branches into debian directory
* remove dh_testroot from clean target
* add myself to uploaders
.
[ Peter Eisentraut ]
* Added support for "status" action to mdadm init script (Closes: #651737) |
|
2012-02-08 16:29:30 |
nutznboltz |
summary |
Please sync mdadm 3.2.3-2 from Debian unstable (main) (was: /etc/cron.daily/mdadm fails if mdadm monitor daemon is already running) |
Please sync mdadm 3.2.3-2 from Debian unstable (main) (multiple regressions) |
|
2012-02-08 16:30:20 |
nutznboltz |
description |
Reproducing:
1. Install Ubuntu 12.04 with md raid.
My system has:
$ cat /proc/mdstat
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10]
md1 : active raid1 sdb2[1] sda2[0]
522048 blocks [2/2] [UU]
md0 : active raid1 sdb1[1] sda1[0]
10490304 blocks [2/2] [UU]
md2 : active raid1 sdc1[0] sdd1[1]
805305143 blocks super 1.2 [2/2] [UU]
unused devices: <none>
2. Try running this mdadm command, observe unexpected results:
# mdadm --monitor --scan --oneshot
mdadm: Only one autorebuild process allowed in scan mode, aborting
3. Also cron will send mail:
/etc/cron.daily/mdadm:
mdadm: Only one autorebuild process allowed in scan mode, aborting
run-parts: /etc/cron.daily/mdadm exited with return code 1
Because when you install the mdadm package this crontab file is created:
$ dpkg -S /etc/cron.daily/mdadm
mdadm: /etc/cron.daily/mdadm
4. Stop any mdadm processes (but only for testing, it is unacceptable to turn off mdadm monitoring.)
# service mdadm stop
5. Try running, observe expected results:
# mdadm --monitor --scan --oneshot
(no output)
This issue was fixed in Debian, please Debian Import this version:
Format: 1.8
Date: Wed, 18 Jan 2012 22:33:01 +0400
Source: mdadm
Binary: mdadm mdadm-udeb
Architecture: source i386
Version: 3.2.3-2
Distribution: unstable
Urgency: low
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Changed-By: Michael Tokarev <mjt@tls.msk.ru>
Description:
mdadm - tool to administer Linux MD arrays (software RAID)
mdadm-udeb - tool to administer Linux MD arrays (software RAID) (udeb)
Closes: 607375 628667 633880 637068 641584 641886 641972 645563 650630 651737 651880 652547 655212
Changes:
mdadm (3.2.3-2) unstable; urgency=low
.
[ Michael Tokarev ]
* new upstream bugfix/stable version, with lots of fixes all over.
Closes: #641886, #628667, #645563, #651880, #607375, #633880
* update Neil's email (Closes: #650630)
* update mdadd.sh to version 1.52 (Closes: #655212)
* fixed a typo (RAID6 vs RAID10) in FAQ (Closes: #637068)
* declare ordering dependency for multipath-tools-boot in
mdadm-raid init script (Closes: #641584)
While at it, remove mention of devfsd
* added Slovak (sk.po) po-debconf translation from Slavko <linux@slavino.sk>
(Closes: #641972)
* set nice value of the check/resync thread too, together with I/O
scheduling class, based on patch by Sergey B Kirpichev (Closes: #652547)
* small changes for debian/checkarray
* (internal) move files from contrib/* topgit branches into debian directory
* remove dh_testroot from clean target
* add myself to uploaders
.
[ Peter Eisentraut ]
* Added support for "status" action to mdadm init script (Closes: #651737) |
Looking at the list of fixes upgrading mdadm from 3.2.2 to 3.2.3 shows some severe regressions were fixed.
mdadm: re-add fails (regression in mdadm-3.2.2-1ubuntu1)
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=651880
mdadm: segmentation fault when converting raid10 to raid0
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=645563
mdadm-raid does not assemble mds on multipath devices
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=641584
This ticket was originally about only one of them:
/etc/cron.daily/mdadm fails if mdadm monitor daemon is already running
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=641886
Reproducing:
1. Install Ubuntu 12.04 with md raid.
My system has:
$ cat /proc/mdstat
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10]
md1 : active raid1 sdb2[1] sda2[0]
522048 blocks [2/2] [UU]
md0 : active raid1 sdb1[1] sda1[0]
10490304 blocks [2/2] [UU]
md2 : active raid1 sdc1[0] sdd1[1]
805305143 blocks super 1.2 [2/2] [UU]
unused devices: <none>
2. Try running this mdadm command, observe unexpected results:
# mdadm --monitor --scan --oneshot
mdadm: Only one autorebuild process allowed in scan mode, aborting
3. Also cron will send mail:
/etc/cron.daily/mdadm:
mdadm: Only one autorebuild process allowed in scan mode, aborting
run-parts: /etc/cron.daily/mdadm exited with return code 1
Because when you install the mdadm package this crontab file is created:
$ dpkg -S /etc/cron.daily/mdadm
mdadm: /etc/cron.daily/mdadm
4. Stop any mdadm processes (but only for testing, it is unacceptable to turn off mdadm monitoring.)
# service mdadm stop
5. Try running, observe expected results:
# mdadm --monitor --scan --oneshot
(no output)
This issue was fixed in Debian, please Debian Import this version:
Format: 1.8
Date: Wed, 18 Jan 2012 22:33:01 +0400
Source: mdadm
Binary: mdadm mdadm-udeb
Architecture: source i386
Version: 3.2.3-2
Distribution: unstable
Urgency: low
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Changed-By: Michael Tokarev <mjt@tls.msk.ru>
Description:
mdadm - tool to administer Linux MD arrays (software RAID)
mdadm-udeb - tool to administer Linux MD arrays (software RAID) (udeb)
Closes: 607375 628667 633880 637068 641584 641886 641972 645563 650630 651737 651880 652547 655212
Changes:
mdadm (3.2.3-2) unstable; urgency=low
.
[ Michael Tokarev ]
* new upstream bugfix/stable version, with lots of fixes all over.
Closes: #641886, #628667, #645563, #651880, #607375, #633880
* update Neil's email (Closes: #650630)
* update mdadd.sh to version 1.52 (Closes: #655212)
* fixed a typo (RAID6 vs RAID10) in FAQ (Closes: #637068)
* declare ordering dependency for multipath-tools-boot in
mdadm-raid init script (Closes: #641584)
While at it, remove mention of devfsd
* added Slovak (sk.po) po-debconf translation from Slavko <linux@slavino.sk>
(Closes: #641972)
* set nice value of the check/resync thread too, together with I/O
scheduling class, based on patch by Sergey B Kirpichev (Closes: #652547)
* small changes for debian/checkarray
* (internal) move files from contrib/* topgit branches into debian directory
* remove dh_testroot from clean target
* add myself to uploaders
.
[ Peter Eisentraut ]
* Added support for "status" action to mdadm init script (Closes: #651737) |
|
2012-02-08 16:31:25 |
nutznboltz |
tags |
precise testcase |
precise regression-update testcase |
|
2012-02-08 17:01:26 |
nutznboltz |
bug |
|
|
added subscriber Ubuntu Sponsors Team |
2012-02-08 17:08:46 |
Timo Aaltonen |
summary |
Please sync mdadm 3.2.3-2 from Debian unstable (main) (multiple regressions) |
Please merge mdadm 3.2.3-2 from Debian unstable (main) (multiple regressions) |
|
2012-02-08 17:09:01 |
Timo Aaltonen |
mdadm (Ubuntu): importance |
Undecided |
High |
|
2012-02-08 18:27:27 |
nutznboltz |
bug |
|
|
added subscriber Clint Byrum |
2012-02-08 20:52:31 |
tekstr1der |
bug |
|
|
added subscriber tekstr1der |
2012-02-09 23:53:49 |
Clint Byrum |
mdadm (Ubuntu): status |
Confirmed |
In Progress |
|
2012-02-09 23:53:51 |
Clint Byrum |
mdadm (Ubuntu): assignee |
|
Clint Byrum (clint-fewbar) |
|
2012-02-10 01:20:12 |
Launchpad Janitor |
mdadm (Ubuntu): status |
In Progress |
Fix Released |
|
2012-03-16 18:57:17 |
John Center |
bug |
|
|
added subscriber John Center |
2012-03-16 22:06:16 |
nutznboltz |
bug watch added |
|
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=651880 |
|
2012-03-16 22:06:16 |
nutznboltz |
bug watch added |
|
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=645563 |
|
2012-03-16 22:06:16 |
nutznboltz |
bug watch added |
|
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=641584 |
|
2012-05-21 23:20:24 |
Launchpad Janitor |
branch linked |
|
lp:~dmitrij.ledkov/ubuntu/precise/mdadm/precise |
|
2012-06-15 11:35:24 |
Launchpad Janitor |
branch linked |
|
lp:~dmitrij.ledkov/ubuntu/quantal/mdadm/merge |
|
2012-07-17 13:31:31 |
Benjamin Drung |
removed subscriber Ubuntu Sponsors Team |
|
|
|
2012-08-21 16:56:43 |
Launchpad Janitor |
branch linked |
|
lp:~ubuntu-branches/ubuntu/quantal/mdadm/quantal |
|