madam allows growing an array beyond metadata size limitations

Here is what happened...

I recently upgraded a system running 6 x 2TB HDDs with an EFI motherboard and 6 x 3TB HDDs. The final step in the process was growing the RAID-5 array using metadata v0.90 (/dev/md1) consisting of 6 component devices of just under 2TB each to use devices of just under 3TB each. At the time I forgot about the limitation that metadata 0.90 does not support component devices over 2TB. However, the grow completed successfully and I was using the system just fine for about 2 eeks. LVM2 is using /dev/md1 as a physical volume for volume group radagast and pvdisplay showed that /dev/md1 has a size of 13.64 TiB. I had been writing data to it regularly and I believe that I had well exceeded the original size of the old array (about 9.4TB). All was fine until a few days ago when I rebooted the system. The system booted back up to a point, when it could not mount some of the file systems that were on logical volumes on /dev/md1. So, it seems that the mdadm --grow operation was successful, but upon boot the mdadm --assemble operation completed, but not with the same size array as after the grow operation. Here is some relavant information:

$ sudo pvdisplay /dev/md1
  --- Physical volume ---
  PV Name /dev/md1
  VG Name radagast
  PV Size 13.64 TiB / not usable 2.81 MiB
  Allocatable yes
  PE Size 4.00 MiB
  Total PE 3576738
  Free PE 561570
  Allocated PE 3015168
  PV UUID 0ay0Ai-jcws-yPAR-DP83-Fha5-LZDO-341dQt

Detail of /dev/md1 after the attempt to reboot. Unfortunately I don't have any detail of the array prior to the grow or reboot. However, the pvdisplay above does show the 13.64 TiB size of the array after the grow operation.

$ sudo mdadm --detail /dev/md1
/dev/md1:
        Version : 00.90
  Creation Time : Wed May 20 17:19:50 2009
     Raid Level : raid5
     Array Size : 3912903680 (3731.64 GiB 4006.81 GB)
  Used Dev Size : 782580736 (746.33 GiB 801.36 GB)
   Raid Devices : 6
  Total Devices : 6
Preferred Minor : 1
    Persistence : Superblock is persistent

    Update Time : Fri Jun 10 00:35:43 2011
          State : clean
 Active Devices : 6
Working Devices : 6
 Failed Devices : 0
  Spare Devices : 0

         Layout : left-symmetric
     Chunk Size : 256K

           UUID : 6650f3f8:19abfca8:e368bf24:bd0fce41
         Events : 0.6539960

    Number Major Minor RaidDevice State
       0 8 3 0 active sync /dev/sda3
       1 8 19 1 active sync /dev/sdb3
       2 8 67 2 active sync /dev/sde3
       3 8 51 3 active sync /dev/sdd3
       4 8 35 4 active sync /dev/sdc3
       5 8 83 5 active sync /dev/sdf3

Code:

# mdadm --detail /dev/md1
/dev/md1:
        Version : 00.90
  Creation Time : Wed May 20 17:19:50 2009
     Raid Level : raid5
     Array Size : 3912903680 (3731.64 GiB 4006.81 GB)
  Used Dev Size : 782580736 (746.33 GiB 801.36 GB)
   Raid Devices : 6
  Total Devices : 6
Preferred Minor : 1
    Persistence : Superblock is persistent

    ...

I probably should have mentioned that the command to grow after replacing each of the siz 2TB HDDs with 3TB HDDs one-by-one, I used the following command to grow the array:

sudo mdadm --grow --size=max /dev/md1

Can confirm that this is repeatable.