| 2008-01-13 23:16:57 |
Christophe Giboudeaux |
bug |
|
|
added bug |
| 2008-01-15 17:34:09 |
Christophe Giboudeaux |
bug |
|
|
assigned to linux-source-2.6.24 (Ubuntu) |
| 2008-01-16 14:41:18 |
Christophe Giboudeaux |
bug |
|
|
added attachment 'dmesg.tar.gz' (Dmesg output.) |
| 2008-01-19 00:06:00 |
Leann Ogasawara |
linux: importance |
Undecided |
Medium |
|
| 2008-01-19 00:06:00 |
Leann Ogasawara |
linux: assignee |
|
ubuntu-kernel-team |
|
| 2008-01-19 00:06:00 |
Leann Ogasawara |
linux: status |
New |
Triaged |
|
| 2008-01-23 00:09:23 |
Cristian Aravena Romero |
bug |
|
|
assigned to linux |
| 2008-01-23 11:19:52 |
Bug Watch Updater |
linux: status |
Unknown |
Fix Released |
|
| 2008-01-23 12:11:04 |
Christophe Giboudeaux |
bug |
|
|
added attachment 'dmesg.txt' (dmesg.txt) |
| 2008-01-23 12:11:27 |
Christophe Giboudeaux |
bug |
|
|
added attachment 'lshw.txt' (lshw.txt) |
| 2008-01-23 12:11:46 |
Christophe Giboudeaux |
bug |
|
|
added attachment 'ifconfig.txt' (ifconfig.txt) |
| 2008-01-23 12:12:11 |
Christophe Giboudeaux |
bug |
|
|
added attachment 'dhcp.txt' (dhcp.txt) |
| 2008-01-27 14:34:33 |
Marco Cimmino |
bug |
|
|
added attachment 'hardy_freeze_log' (lock up log) |
| 2008-01-29 04:49:11 |
moski666@gmail.com |
bug |
|
|
added attachment 'blacklist' (blacklist) |
| 2008-02-23 21:09:39 |
Andreas Gnau |
bug |
|
|
assigned to linux (Mandriva) |
| 2008-02-24 09:50:11 |
Bug Watch Updater |
linux: status |
Unknown |
Fix Released |
|
| 2008-03-05 13:46:02 |
Colin Ian King |
linux: status |
Triaged |
In Progress |
|
| 2008-03-05 13:46:02 |
Colin Ian King |
linux: assignee |
ubuntu-kernel-team |
colin-king |
|
| 2008-03-06 13:54:23 |
Colin Ian King |
linux: status |
In Progress |
Fix Committed |
|
| 2008-03-07 16:10:09 |
Launchpad Janitor |
linux: status |
Fix Committed |
Fix Released |
|
| 2008-03-21 23:34:43 |
Leann Ogasawara |
linux-source-2.6.24: status |
New |
Invalid |
|
| 2008-03-22 18:23:47 |
Matthew Woerly |
linux: status |
Fix Released |
Confirmed |
|
| 2008-03-22 23:06:55 |
monoi |
linux: status |
Confirmed |
Fix Released |
|
| 2008-03-23 01:57:00 |
Matthew Woerly |
linux: status |
Fix Released |
Confirmed |
|
| 2008-03-23 13:43:25 |
Matthew Woerly |
title |
bcm4306 doesn't work with b43 / ssb |
bcm4306, bcm4309, bcm4311 don't work with b43 / ssb |
|
| 2008-03-23 14:46:15 |
Matthew Woerly |
title |
bcm4306, bcm4309, bcm4311 don't work with b43 / ssb |
bcm4306, bcm4309, bcm4311, bcm4312 don't work with b43 / ssb |
|
| 2008-03-23 15:13:08 |
Juksu |
bug |
|
|
added attachment 'WLAN NOT working network-manager 0.6.6-0ubuntu2' (WLAN NOT working network-manager 0.6.6-0ubuntu2) |
| 2008-03-23 15:14:37 |
Juksu |
bug |
|
|
added attachment 'WLAN Working network-manager 0.6.6-0ubuntu1' (WLAN Working network-manager 0.6.6-0ubuntu1) |
| 2008-03-24 00:35:50 |
Matthew Woerly |
bug |
|
|
added attachment 'Dump' (dmesg and iwconfig) |
| 2008-03-24 02:16:28 |
naught101 |
bug |
|
|
added attachment 'dmesg.08.03.24.1301' (dmesg.08.03.24.1301) |
| 2008-03-26 23:16:02 |
naught101 |
bug |
|
|
added attachment 'dpkg.log.08.03.26' (dpkg.log.08.03.26) |
| 2008-03-31 16:39:13 |
Tristan |
bug |
|
|
added attachment 'unnamed' (unnamed) |
| 2008-04-10 10:36:05 |
Christophe Giboudeaux |
description |
Dist : Hardy 8.04
$ uname -a
Linux mokona 2.6.24-4-generic #1 SMP Thu Jan 10 23:30:27 UTC 2008 i686 GNU/Linux
Concerned hardware :
02:09.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
Subsystem: Linksys Unknown device [1737:0013]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=8K]
The concerned card is a Linksys WMP-54g
After upgrading from Gutsy to Hardy, I blacklisted the ndiswrapper module and the bcm43xx one to try the b43 one (I used b43-fwcutter and the correct file to extract firmware).
After rebooting, the network doesn't work and only does if I unload ohci-hcd, ssb, b43 and modprobe bcm43xx.
If I unload everything and modprobe b43 :
[ 1696.188497] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
[ 1696.226619] ssb: Sonics Silicon Backplane found on PCI device 0000:02:09.0
[ 1696.254937] b43-phy0: Broadcom 4306 WLAN found
[ 1696.342897] phy0: Selected rate control algorithm 'simple'
[ 1696.472470] udev: renamed network interface wmaster0 to eth1
[ 1696.549096] input: b43-phy0 as /devices/virtual/input/input5
[ 772.133199] ADDRCONF(NETDEV_UP): wlan0: link is not ready
ifconfig -a returns :
# ifconfig -a
eth1 Link encap:UNSPEC HWaddr 00-0F-66-F2-8E-4A-40-E2-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:0f:66:f2:8e:4a
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
lshw -C network returns :
*-network
description: Network controller
product: BCM4306 802.11b/g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 9
bus info: pci@0000:02:09.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=b43-pci-bridge latency=32 module=ssb
*-network
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:0f:66:f2:8e:4a
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11g
At this point, restarting the network gives :
Internet Systems Consortium DHCP Client V3.0.6
Copyright 2004-2007 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
eth1: unknown hardware address type 801
eth1: unknown hardware address type 801
Listening on LPF/wlan0/00:0f:66:f2:8e:4a
Sending on LPF/wlan0/00:0f:66:f2:8e:4a
Sending on Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
[cut]
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
and dmesg :
[ 2165.226966] wlan0: Initial auth_alg=0
[ 2165.226977] wlan0: authenticate with AP <the router MAC>
[cut 2 lines]
[ 2165.826050] wlan0: authentication with AP <the router MAC> timed out
--
Now, if I modprobe -r b43 && modprobe bcm43xx :
# lshw -C network
*-network
description: Wireless interface
product: BCM4306 802.11b/g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 9
bus info: pci@0000:02:09.0
logical name: wlan0
version: 03
serial: 00:0f:66:f2:8e:4a
width: 32 bits
clock: 33MHz
capabilities: bus_master ethernet physical wireless
configuration: broadcast=yes driver=bcm43xx driverversion=2.6.24-4-generic ip=192.168.15.1 latency=32 link=yes module=bcm43xx multicast=yes wireless=IEEE 802.11b/g
Dmesg output :
[ 2286.617516] ACPI: PCI interrupt for device 0000:02:09.0 disabled
[ 2286.684085] bcm43xx driver
[ 2286.695657] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
[ 2286.746964] udev: renamed network interface eth0 to wlan0
[ 2286.747605] prism2usb_init: prism2_usb.o: 0.2.8 Loaded
[ 2286.747611] prism2usb_init: dev_info is: prism2_usb
[ 2286.747653] usbcore: registered new interface driver prism2_usb
[ 2286.995489] bcm43xx: Radio enabled by hardware
[ 2287.207872] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2287.500654] bcm43xx: Radio enabled by hardware
[ 2287.716373] ADDRCONF(NETDEV_UP): wlan0: link is not ready
and I have a working network (and reload ohci-hcd).
---
Last attempt then : blacklist b43, add bcm43xx in /etc/modules and reboot and it doesn't work. lshw returns «configuration: driver=b43-pci-bridge latency=32 module=ssb».
It is working if I blacklist b43 in /etc/modprobe.d and (very very badly) blacklist ssb (renaming ssb.ko). Only trouble then, ohci-hcd can't load :
[ 22.523070] usbcore: registered new interface driver usbfs
[ 22.526435] usbcore: registered new interface driver hub
[ 22.536698] usbcore: registered new device driver usb
[ 22.541300] ohci_hcd: Unknown symbol ssb_device_disable
[ 22.545038] ohci_hcd: Unknown symbol ssb_admatch_base
[ 22.548913] ohci_hcd: Unknown symbol ssb_device_enable
[ 22.552850] ohci_hcd: Unknown symbol ssb_driver_unregister
[ 22.556937] ohci_hcd: Unknown symbol __ssb_driver_register
[ 22.561268] ohci_hcd: Unknown symbol ssb_admatch_size
--
I hope this is clear enough :-) |
Note to Triage Team : This bug is NOT about Ndiswrapper, NOT about bcm43xx and NOT about conflicts users may have with SSB.
This bug is about timeout when authentificating with AP when using a bcm4306 rev. 03 card and b43 module.
Dist : Hardy 8.04
$ uname -a
Linux mokona 2.6.24-4-generic #1 SMP Thu Jan 10 23:30:27 UTC 2008 i686 GNU/Linux
Concerned hardware :
02:09.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
Subsystem: Linksys Unknown device [1737:0013]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=8K]
The concerned card is a Linksys WMP-54g
After upgrading from Gutsy to Hardy, I blacklisted the ndiswrapper module and the bcm43xx one to try the b43 one (I used b43-fwcutter and the correct file to extract firmware).
After rebooting, the network doesn't work and only does if I unload ohci-hcd, ssb, b43 and modprobe bcm43xx.
If I unload everything and modprobe b43 :
[ 1696.188497] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
[ 1696.226619] ssb: Sonics Silicon Backplane found on PCI device 0000:02:09.0
[ 1696.254937] b43-phy0: Broadcom 4306 WLAN found
[ 1696.342897] phy0: Selected rate control algorithm 'simple'
[ 1696.472470] udev: renamed network interface wmaster0 to eth1
[ 1696.549096] input: b43-phy0 as /devices/virtual/input/input5
[ 772.133199] ADDRCONF(NETDEV_UP): wlan0: link is not ready
ifconfig -a returns :
# ifconfig -a
eth1 Link encap:UNSPEC HWaddr 00-0F-66-F2-8E-4A-40-E2-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:0f:66:f2:8e:4a
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
lshw -C network returns :
*-network
description: Network controller
product: BCM4306 802.11b/g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 9
bus info: pci@0000:02:09.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=b43-pci-bridge latency=32 module=ssb
*-network
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:0f:66:f2:8e:4a
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11g
At this point, restarting the network gives :
Internet Systems Consortium DHCP Client V3.0.6
Copyright 2004-2007 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
eth1: unknown hardware address type 801
eth1: unknown hardware address type 801
Listening on LPF/wlan0/00:0f:66:f2:8e:4a
Sending on LPF/wlan0/00:0f:66:f2:8e:4a
Sending on Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
[cut]
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
and dmesg :
[ 2165.226966] wlan0: Initial auth_alg=0
[ 2165.226977] wlan0: authenticate with AP <the router MAC>
[cut 2 lines]
[ 2165.826050] wlan0: authentication with AP <the router MAC> timed out
--
Now, if I modprobe -r b43 && modprobe bcm43xx :
# lshw -C network
*-network
description: Wireless interface
product: BCM4306 802.11b/g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 9
bus info: pci@0000:02:09.0
logical name: wlan0
version: 03
serial: 00:0f:66:f2:8e:4a
width: 32 bits
clock: 33MHz
capabilities: bus_master ethernet physical wireless
configuration: broadcast=yes driver=bcm43xx driverversion=2.6.24-4-generic ip=192.168.15.1 latency=32 link=yes module=bcm43xx multicast=yes wireless=IEEE 802.11b/g
Dmesg output :
[ 2286.617516] ACPI: PCI interrupt for device 0000:02:09.0 disabled
[ 2286.684085] bcm43xx driver
[ 2286.695657] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
[ 2286.746964] udev: renamed network interface eth0 to wlan0
[ 2286.747605] prism2usb_init: prism2_usb.o: 0.2.8 Loaded
[ 2286.747611] prism2usb_init: dev_info is: prism2_usb
[ 2286.747653] usbcore: registered new interface driver prism2_usb
[ 2286.995489] bcm43xx: Radio enabled by hardware
[ 2287.207872] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2287.500654] bcm43xx: Radio enabled by hardware
[ 2287.716373] ADDRCONF(NETDEV_UP): wlan0: link is not ready
and I have a working network (and reload ohci-hcd).
---
Last attempt then : blacklist b43, add bcm43xx in /etc/modules and reboot and it doesn't work. lshw returns «configuration: driver=b43-pci-bridge latency=32 module=ssb».
It is working if I blacklist b43 in /etc/modprobe.d and (very very badly) blacklist ssb (renaming ssb.ko). Only trouble then, ohci-hcd can't load :
[ 22.523070] usbcore: registered new interface driver usbfs
[ 22.526435] usbcore: registered new interface driver hub
[ 22.536698] usbcore: registered new device driver usb
[ 22.541300] ohci_hcd: Unknown symbol ssb_device_disable
[ 22.545038] ohci_hcd: Unknown symbol ssb_admatch_base
[ 22.548913] ohci_hcd: Unknown symbol ssb_device_enable
[ 22.552850] ohci_hcd: Unknown symbol ssb_driver_unregister
[ 22.556937] ohci_hcd: Unknown symbol __ssb_driver_register
[ 22.561268] ohci_hcd: Unknown symbol ssb_admatch_size
--
I hope this is clear enough :-) |
|
| 2008-04-10 10:36:05 |
Christophe Giboudeaux |
title |
bcm4306, bcm4309, bcm4311, bcm4312 don't work with b43 / ssb |
bcm4306, bcm4309, bcm4311, bcm4312 with b43 : Authentification with AP doesn't work. |
|
| 2008-04-26 15:06:13 |
Olivier B |
bug |
|
|
added attachment 'unnamed' (unnamed) |
| 2008-05-15 10:42:27 |
Mantas Kriaučiūnas |
bug |
|
|
assigned to linux (Baltix) |
| 2008-05-29 23:46:38 |
Matthew Woerly |
description |
Note to Triage Team : This bug is NOT about Ndiswrapper, NOT about bcm43xx and NOT about conflicts users may have with SSB.
This bug is about timeout when authentificating with AP when using a bcm4306 rev. 03 card and b43 module.
Dist : Hardy 8.04
$ uname -a
Linux mokona 2.6.24-4-generic #1 SMP Thu Jan 10 23:30:27 UTC 2008 i686 GNU/Linux
Concerned hardware :
02:09.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
Subsystem: Linksys Unknown device [1737:0013]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=8K]
The concerned card is a Linksys WMP-54g
After upgrading from Gutsy to Hardy, I blacklisted the ndiswrapper module and the bcm43xx one to try the b43 one (I used b43-fwcutter and the correct file to extract firmware).
After rebooting, the network doesn't work and only does if I unload ohci-hcd, ssb, b43 and modprobe bcm43xx.
If I unload everything and modprobe b43 :
[ 1696.188497] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
[ 1696.226619] ssb: Sonics Silicon Backplane found on PCI device 0000:02:09.0
[ 1696.254937] b43-phy0: Broadcom 4306 WLAN found
[ 1696.342897] phy0: Selected rate control algorithm 'simple'
[ 1696.472470] udev: renamed network interface wmaster0 to eth1
[ 1696.549096] input: b43-phy0 as /devices/virtual/input/input5
[ 772.133199] ADDRCONF(NETDEV_UP): wlan0: link is not ready
ifconfig -a returns :
# ifconfig -a
eth1 Link encap:UNSPEC HWaddr 00-0F-66-F2-8E-4A-40-E2-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:0f:66:f2:8e:4a
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
lshw -C network returns :
*-network
description: Network controller
product: BCM4306 802.11b/g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 9
bus info: pci@0000:02:09.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=b43-pci-bridge latency=32 module=ssb
*-network
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:0f:66:f2:8e:4a
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11g
At this point, restarting the network gives :
Internet Systems Consortium DHCP Client V3.0.6
Copyright 2004-2007 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
eth1: unknown hardware address type 801
eth1: unknown hardware address type 801
Listening on LPF/wlan0/00:0f:66:f2:8e:4a
Sending on LPF/wlan0/00:0f:66:f2:8e:4a
Sending on Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
[cut]
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
and dmesg :
[ 2165.226966] wlan0: Initial auth_alg=0
[ 2165.226977] wlan0: authenticate with AP <the router MAC>
[cut 2 lines]
[ 2165.826050] wlan0: authentication with AP <the router MAC> timed out
--
Now, if I modprobe -r b43 && modprobe bcm43xx :
# lshw -C network
*-network
description: Wireless interface
product: BCM4306 802.11b/g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 9
bus info: pci@0000:02:09.0
logical name: wlan0
version: 03
serial: 00:0f:66:f2:8e:4a
width: 32 bits
clock: 33MHz
capabilities: bus_master ethernet physical wireless
configuration: broadcast=yes driver=bcm43xx driverversion=2.6.24-4-generic ip=192.168.15.1 latency=32 link=yes module=bcm43xx multicast=yes wireless=IEEE 802.11b/g
Dmesg output :
[ 2286.617516] ACPI: PCI interrupt for device 0000:02:09.0 disabled
[ 2286.684085] bcm43xx driver
[ 2286.695657] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
[ 2286.746964] udev: renamed network interface eth0 to wlan0
[ 2286.747605] prism2usb_init: prism2_usb.o: 0.2.8 Loaded
[ 2286.747611] prism2usb_init: dev_info is: prism2_usb
[ 2286.747653] usbcore: registered new interface driver prism2_usb
[ 2286.995489] bcm43xx: Radio enabled by hardware
[ 2287.207872] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2287.500654] bcm43xx: Radio enabled by hardware
[ 2287.716373] ADDRCONF(NETDEV_UP): wlan0: link is not ready
and I have a working network (and reload ohci-hcd).
---
Last attempt then : blacklist b43, add bcm43xx in /etc/modules and reboot and it doesn't work. lshw returns «configuration: driver=b43-pci-bridge latency=32 module=ssb».
It is working if I blacklist b43 in /etc/modprobe.d and (very very badly) blacklist ssb (renaming ssb.ko). Only trouble then, ohci-hcd can't load :
[ 22.523070] usbcore: registered new interface driver usbfs
[ 22.526435] usbcore: registered new interface driver hub
[ 22.536698] usbcore: registered new device driver usb
[ 22.541300] ohci_hcd: Unknown symbol ssb_device_disable
[ 22.545038] ohci_hcd: Unknown symbol ssb_admatch_base
[ 22.548913] ohci_hcd: Unknown symbol ssb_device_enable
[ 22.552850] ohci_hcd: Unknown symbol ssb_driver_unregister
[ 22.556937] ohci_hcd: Unknown symbol __ssb_driver_register
[ 22.561268] ohci_hcd: Unknown symbol ssb_admatch_size
--
I hope this is clear enough :-) |
Note to Triage Team : This bug is NOT about Ndiswrapper, NOT about bcm43xx and NOT about conflicts users may have with SSB.
This bug is about timeout when authenticating with AP when using a bcm4306 rev. 03 card and b43 module.
Dist : Hardy 8.04
$ uname -a
Linux mokona 2.6.24-4-generic #1 SMP Thu Jan 10 23:30:27 UTC 2008 i686 GNU/Linux
Concerned hardware :
02:09.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
Subsystem: Linksys Unknown device [1737:0013]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=8K]
The concerned card is a Linksys WMP-54g
After upgrading from Gutsy to Hardy, I blacklisted the ndiswrapper module and the bcm43xx one to try the b43 one (I used b43-fwcutter and the correct file to extract firmware).
After rebooting, the network doesn't work and only does if I unload ohci-hcd, ssb, b43 and modprobe bcm43xx.
If I unload everything and modprobe b43 :
[ 1696.188497] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
[ 1696.226619] ssb: Sonics Silicon Backplane found on PCI device 0000:02:09.0
[ 1696.254937] b43-phy0: Broadcom 4306 WLAN found
[ 1696.342897] phy0: Selected rate control algorithm 'simple'
[ 1696.472470] udev: renamed network interface wmaster0 to eth1
[ 1696.549096] input: b43-phy0 as /devices/virtual/input/input5
[ 772.133199] ADDRCONF(NETDEV_UP): wlan0: link is not ready
ifconfig -a returns :
# ifconfig -a
eth1 Link encap:UNSPEC HWaddr 00-0F-66-F2-8E-4A-40-E2-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:0f:66:f2:8e:4a
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
lshw -C network returns :
*-network
description: Network controller
product: BCM4306 802.11b/g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 9
bus info: pci@0000:02:09.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=b43-pci-bridge latency=32 module=ssb
*-network
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:0f:66:f2:8e:4a
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11g
At this point, restarting the network gives :
Internet Systems Consortium DHCP Client V3.0.6
Copyright 2004-2007 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
eth1: unknown hardware address type 801
eth1: unknown hardware address type 801
Listening on LPF/wlan0/00:0f:66:f2:8e:4a
Sending on LPF/wlan0/00:0f:66:f2:8e:4a
Sending on Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
[cut]
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
and dmesg :
[ 2165.226966] wlan0: Initial auth_alg=0
[ 2165.226977] wlan0: authenticate with AP <the router MAC>
[cut 2 lines]
[ 2165.826050] wlan0: authentication with AP <the router MAC> timed out
--
Now, if I modprobe -r b43 && modprobe bcm43xx :
# lshw -C network
*-network
description: Wireless interface
product: BCM4306 802.11b/g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 9
bus info: pci@0000:02:09.0
logical name: wlan0
version: 03
serial: 00:0f:66:f2:8e:4a
width: 32 bits
clock: 33MHz
capabilities: bus_master ethernet physical wireless
configuration: broadcast=yes driver=bcm43xx driverversion=2.6.24-4-generic ip=192.168.15.1 latency=32 link=yes module=bcm43xx multicast=yes wireless=IEEE 802.11b/g
Dmesg output :
[ 2286.617516] ACPI: PCI interrupt for device 0000:02:09.0 disabled
[ 2286.684085] bcm43xx driver
[ 2286.695657] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
[ 2286.746964] udev: renamed network interface eth0 to wlan0
[ 2286.747605] prism2usb_init: prism2_usb.o: 0.2.8 Loaded
[ 2286.747611] prism2usb_init: dev_info is: prism2_usb
[ 2286.747653] usbcore: registered new interface driver prism2_usb
[ 2286.995489] bcm43xx: Radio enabled by hardware
[ 2287.207872] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2287.500654] bcm43xx: Radio enabled by hardware
[ 2287.716373] ADDRCONF(NETDEV_UP): wlan0: link is not ready
and I have a working network (and reload ohci-hcd).
---
Last attempt then : blacklist b43, add bcm43xx in /etc/modules and reboot and it doesn't work. lshw returns «configuration: driver=b43-pci-bridge latency=32 module=ssb».
It is working if I blacklist b43 in /etc/modprobe.d and (very very badly) blacklist ssb (renaming ssb.ko). Only trouble then, ohci-hcd can't load :
[ 22.523070] usbcore: registered new interface driver usbfs
[ 22.526435] usbcore: registered new interface driver hub
[ 22.536698] usbcore: registered new device driver usb
[ 22.541300] ohci_hcd: Unknown symbol ssb_device_disable
[ 22.545038] ohci_hcd: Unknown symbol ssb_admatch_base
[ 22.548913] ohci_hcd: Unknown symbol ssb_device_enable
[ 22.552850] ohci_hcd: Unknown symbol ssb_driver_unregister
[ 22.556937] ohci_hcd: Unknown symbol __ssb_driver_register
[ 22.561268] ohci_hcd: Unknown symbol ssb_admatch_size
--
I hope this is clear enough :-) |
|
| 2008-05-29 23:46:38 |
Matthew Woerly |
title |
bcm4306, bcm4309, bcm4311, bcm4312 with b43 : Authentification with AP doesn't work. |
bcm4306, bcm4309, bcm4311, bcm4312 with b43 : Authentication with AP doesn't work. |
|
| 2008-08-12 14:28:51 |
Larry Finger |
bug |
|
|
added attachment 'ben_warren_new' (Updated SPROM contents for Ben Warren) |
| 2008-08-14 20:28:03 |
Larry Finger |
bug |
|
|
added attachment 'nattgew_sprom_new' (Revised SPROM contents.) |
| 2008-08-15 00:32:18 |
Matthew Woerly |
bug |
|
|
added attachment 'v' (syslog of connection) |
| 2008-08-15 02:10:55 |
Larry Finger |
bug |
|
|
added attachment 'nattgew_sprom_2_new' (Revised SPROM for second device) |
| 2008-08-16 00:53:21 |
Matthew Woerly |
bug |
|
|
added attachment '6' (syslog) |
| 2008-08-16 13:53:21 |
Larry Finger |
bug |
|
|
added attachment 'christophe_sprom_new' (Updated SPROM for Christophe) |
| 2008-08-31 09:56:44 |
Dean Jones |
bug |
|
|
added attachment 'dmesg.txt' (dmesg.txt) |
| 2008-11-15 16:39:40 |
KD |
bug |
|
|
added attachment 'dmesg.txt' (dmesg output) |
| 2009-01-23 21:30:08 |
RapazP |
bug |
|
|
added subscriber Nonos |
| 2009-01-28 23:24:10 |
Launchpad Janitor |
linux: status |
Confirmed |
Fix Released |
|
| 2009-04-14 12:50:20 |
Andy Whitcroft |
linux: status |
New |
Invalid |
|
| 2009-04-14 15:15:37 |
Alexandre Garnier |
removed subscriber Alexandre Garnier |
|
|
|
| 2009-05-06 08:41:58 |
Sergio Zanchetta |
linux-source-2.6.22 (Ubuntu): status |
New |
Won't Fix |
|
| 2009-05-06 08:58:26 |
RapazP |
removed subscriber Nonos |
|
|
|
| 2009-09-09 10:10:55 |
ukozok |
linux (Ubuntu): status |
Fix Released |
Confirmed |
|
| 2011-01-12 17:26:07 |
Jeremy Foshee |
linux (Ubuntu): assignee |
Colin King (colin-king) |
|
|
| 2011-01-12 17:26:12 |
Jeremy Foshee |
linux (Ubuntu): status |
Confirmed |
Fix Released |
|
| 2012-10-02 08:36:24 |
Martin Marcher |
removed subscriber Martin Marcher |
|
|
|
| 2013-04-20 17:41:30 |
pauls |
removed subscriber pauls |
|
|
|
