Ubuntu
linux-raspi package

focal/linux-raspi: Upstream raspberrypi patchset 2020-12-10

Bug #1908077 reported by Juerg Haefliger on 2020-12-14

This bug affects 1 person

Affects		Status	Importance	Assigned to	Milestone
	linux-raspi (Ubuntu)	Confirmed	Undecided	Unassigned
	Focal	Fix Released	Undecided	Unassigned

Bug Description

Upstream raspberrypi patchset 2020-12-10

Ported from the following raspberrypi branch:
rpi-5.4.y

from https://github.com/raspberrypi/linux.git

media: i2c: imx477: Selection compliance fixes
overlays: Fix cut-and-paste error in README
overlays: Add PCF85063 and PCF85063A to i2c-rtc
configs: Add RTC_DRV_PCF85063=m
ARM: dts: CM4 audio pins are not connected
media: bcm2835-unicam: Clear clock state when stopping streaming
media: bcm2835-unicam: Return early from stop_streaming() if stopped
media: bcm2835-unicam: Correctly handle error propagation for stream on
media: i2c: imx219: Selection compliance fixes
Add mcp251xfd driver as module to RPI build configuration
mcp251xfd: add overlay
can: mcp251xfd: remove unneeded break
can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
can: mcp251xfd: rename all remaining occurrence to mcp251xfd
can: mcp251xfd: rename all user facing strings to mcp251xfd
can: mcp251xfd: rename driver files and subdir to mcp251xfd
can: mcp25xxfd: narrow down wildcards in device tree bindings to "microchip,mcp251xfd"
dt-binding: can: mcp251xfd: narrow down wildcards in device tree bindings to "microchip,mcp251xfd"
dt-binding: can: mcp25xxfd: documentation fixes
can: mcp25xxfd: mcp25xxfd_irq(): add missing initialization of variable set_normal mode
can: mcp25xxfd: mcp25xxfd_ring_free(): fix memory leak during cleanup
can: mcp25xxfd: mcp25xxfd_probe(): add SPI clk limit related errata information
can: mcp25xxfd: mcp25xxfd_handle_eccif(): add ECC related errata and update log messages
can: mcp25xxfd: add listen-only mode
can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN
can: mcp25xxfd: add regmap infrastructure
dt-binding: can: mcp25xxfd: document device tree bindings
can: rx-offload: can_rx_offload_add_manual(): add new initialization function
Update volume controls in Allo Piano Dac Plus
Overlay: Update Allo Piano Plus dac driver for 5.4.y kernels.
Update Allo Piano Dac Driver for 5.4.y kernels
staging: vcsm-cma: Fix memory leak from not detaching dmabuf
ARM: dts: bcm27xx: Remove enable_headphones setting
overlays: Complete the sdtweak excision
overlays: Deprecate and delete the sdtweak overlay
ARM: dts: Add bcm2711-rpi-400.dts
Revert "mailbox: avoid timer start from callback"
Add allo boss2 config
Add allo boss2 overlay
Allo boss2 driver
phy: broadcom: Add bcm54213pe configuration
phy: broadcom: split out the BCM54213PE from the BCM54210E IDs
firmware: raspberrypi: Add support for tryonce reboot flag
watchdog: bcm2835: Ignore params after the partition number
bcm2835-pcm: Fix up multichannel pcm audio
bcm2708_fb: Fix a build warning
dwc_otg: Fix more build warnings
rpivid_h625: Fix build warnings
gpio-fsm: Fix a build warning
dwc_otg: Minimise header and fix build warnings
PiFi-40 driver, Makefile and Kconfig
PiFi-40 Devicetree files
PiFi-40 defconfigs
rpisense-fb: Set pseudo_pallete to prevent crash on fbcon takeover
overlays: Enable headphone audio in audremap
ARM: dts: Disable headphone audio on Zeroes, CM4
staging: bcm2835-audio: Add disable-headphones flag
dts: Tidy the Raspberry Pi Makefile entries
dts: Add CM4 to arm64 dt files
xhci: quirks: add link TRB quirk for VL805
dtoverlays: Correct CSI2 settings for ov9281
Revert "Bluetooth: Check key sizes only when Secure Simple Pairing is enabled"
uapi: Update V4L2_CID_USER_BCM2835_ISP_BASE due to upstream change
Fixes a problem when module probes before i2c module is available
overlays: Add ghost-amp overlay
overlays: Add fsm-demo overlay
configs: Add CONFIG_GPIO_FSM=m
gpio: Add gpio-fsm driver
ARM: bcm2711-rpi.dts: Unlock DMA channels 9 & 10
staging: bcm2835-codec: Replace deprecated V4L2_PIX_FMT_BGR32
staging: bcm2835-camera: Replace deprecated V4L2_PIX_FMT_BGR32
arm64: configs: Enable V4L2 test module support
arm64: configs: Enable Unicam support
dwc_otg: initialise sched_frame for periodic QHs that were parked
configs: Add MEMCG_SWAP support initially disabled
configs: Restore SND_PCM_OSS=m
overlays: Add sd3078 to the i2c-rtc overlay
configs: Add CONFIG_RTC_DRV_SD3078=m
SQUASH: USB: gadget: f_hid: remove more spam
overlays: Update display GPIO declarations
Update hy28b-overlay.dts
USB: gadget: f_hid: avoid crashes and log spam
staging: bcm2835-codec: Correct buffer number change on start streaming
staging: bcm2835-codec: Use a define the completion timeout
configs: Regenerate the defconfigs
ASoC: cs42xx8: Only define cs42xx8_of_match once
net: bcmgenet: Reset RBUF on first open
configs: Remove I2C_BRCMSTB from the kernel
overlays: adafruit18,sainsmart18: default bgr to off
overlays: Add note to BCM2711 overlays
overlays: Add extra CMA sizes (up to 512M)
rpivid_h265: Fix width/height typo
overlays: Add parameters to adafruit18, sainsmart18
overlays: Regenerate upstream-pi4 overlay
minor typo in directions
overlays: Add option for composite to vc4-kms-v3d-pi4.
dt: Remove duplicate assignment for i2c0 pinctrl config
overlays: Update i2c0 overlay to disable the i2c0mux.
configs: Enable CHACHA20POLY1305=m
ARM: dts: Limit BT modem baud rate on 3B

See original description

CVE References

Juerg Haefliger (juergh) on 2020-12-14

Changed in linux-raspi (Ubuntu):
status:	New → Confirmed

Juerg Haefliger (juergh) on 2020-12-15

description:

updated

Ian May (ian-may) on 2020-12-18

Changed in linux-raspi (Ubuntu Focal):
status:	New → Fix Committed

Revision history for this message

Launchpad Janitor (janitor) wrote on 2021-01-28:

Download full text (8.3 KiB)

This bug was fixed in the package linux-raspi - 5.4.0-1028.31

---------------
linux-raspi (5.4.0-1028.31) focal; urgency=medium

* focal/linux-raspi: 5.4.0-1028.31 -proposed tracker (LP: #1911311)

[ Ubuntu: 5.4.0-63.71 ]

  * focal/linux: 5.4.0-63.71 -proposed tracker (LP: #1911333)
  * overlay: permission regression in 5.4.0-51.56 due to patches related to
    CVE-2020-16120 (LP: #1900141)
    - ovl: do not fail because of O_NOATIME
  * Focal update: v5.4.79 upstream stable release (LP: #1907151)
    - net/mlx5: Use async EQ setup cleanup helpers for multiple EQs
    - net/mlx5: poll cmd EQ in case of command timeout
    - net/mlx5: Fix a race when moving command interface to events mode
    - net/mlx5: Add retry mechanism to the command entry index allocation
  * Kernel 5.4.0-56 Wi-Fi does not connect (LP: #1906770)
    - mt76: fix fix ampdu locking
  * [Ubuntu 21.04 FEAT] mpt3sas: Request to include the patch set which supports
    topology where zoning is enabled in expander (LP: #1899802)
    - scsi: mpt3sas: Define hba_port structure
    - scsi: mpt3sas: Allocate memory for hba_port objects
    - scsi: mpt3sas: Rearrange _scsih_mark_responding_sas_device()
    - scsi: mpt3sas: Update hba_port's sas_address & phy_mask
    - scsi: mpt3sas: Get device objects using sas_address & portID
    - scsi: mpt3sas: Rename transport_del_phy_from_an_existing_port()
    - scsi: mpt3sas: Get sas_device objects using device's rphy
    - scsi: mpt3sas: Update hba_port objects after host reset
    - scsi: mpt3sas: Set valid PhysicalPort in SMPPassThrough
    - scsi: mpt3sas: Handling HBA vSES device
    - scsi: mpt3sas: Add bypass_dirty_port_flag parameter
    - scsi: mpt3sas: Handle vSES vphy object during HBA reset
    - scsi: mpt3sas: Add module parameter multipath_on_hba
    - scsi: mpt3sas: Bump driver version to 35.101.00.00

[ Ubuntu: 5.4.0-62.70 ]

  * focal/linux: 5.4.0-62.70 -proposed tracker (LP: #1911144)
  * CVE-2020-28374
    - SAUCE: target: fix XCOPY NAA identifier lookup
  * Packaging resync (LP: #1786013)
    - update dkms package versions

linux-raspi (5.4.0-1027.30) focal; urgency=medium

* focal/linux-raspi: 5.4.0-1027.30 -proposed tracker (LP: #1910016)

* rpi3b+ wifi doesn't get used if ethernet disconnected (LP: #1890487)
- net: lan78xx: Ack pending PHY ints when resetting

This bug was fixed in the package linux-raspi - 5.4.0-1028.31

---------------
linux-raspi (5.4.0-1028.31) focal; urgency=medium

* focal/linux-raspi: 5.4.0-1028.31 -proposed tracker (LP: #1911311)

[ Ubuntu: 5.4.0-63.71 ]

[ Ubuntu: 5.4.0-62.70 ]

linux-raspi (5.4.0-1027.30) focal; urgency=medium

* focal/linux-raspi: 5.4.0-1027.30 -proposed tracker (LP: #1910016)

* rpi3b+ wifi doesn't get used if ethernet disconnected (LP: #1890487)
    - net: lan78xx: Ack pending PHY ints when resetting

* focal/linux-raspi: Upstream raspberrypi patchset 2020-12-10 (LP: #1908077)
    - ARM: dts: Limit BT modem baud rate on 3B
    - configs: Enable CHACHA20POLY1305=m
    - overlays: Update i2c0 overlay to disable the i2c0mux.
    - dt: Remove duplicate assignment for i2c0 pinctrl config
    - overlays: Add option for composite to vc4-kms-v3d-pi4.
    - minor typo in directions
    - overlays: Regenerate upstream-pi4 overlay
    - overlays: Add parameters to adafruit18, sainsmart18
    - rpivid_h265: Fix width/height typo
    - overlays: Add extra CMA sizes (up to 512M)
    - overlays: Add note to BCM2711 overlays
    - overlays: adafruit18,sainsmart18: default bgr to off
    - configs: Remove I2C_BRCMSTB from the kernel
    - net: bcmgenet: Reset RBUF on first open
    - ASoC: cs42xx8: Only define cs42xx8_of_match once
    - configs: Regenerate the defconfigs
    - staging: bcm2835-codec: Use a define the completion timeout
    - staging: bcm2835-codec: Correct buffer number change on start streaming
    - USB: gadget: f_hid: avoid crashes and log spam
    - Update hy28b-overlay.dts
    - overlays: Update display GPIO declarations
    - SQUASH: USB: gadget: f_hid: remove more spam
    - configs: Add CONFIG_RTC_DRV_SD3078=m
    - overlays: Add sd3078 to the i2c-rtc overlay
    - configs: Restore SND_PCM_OSS=m
    - configs: Add MEMCG_SWAP support initially disabled
    - dwc_otg: initialise sched_frame for periodic QHs that were parked
    - arm64: configs: Enable Unicam support
    - arm64: configs: Enable V4L2 test module support
    - staging: bcm2835-camera: Replace deprecated V4L2_PIX_FMT_BGR32
    - staging: bcm2835-codec: Replace deprecated V4L2_PIX_FMT_BGR32
    - ARM: bcm2711-rpi.dts: Unlock DMA channels 9 & 10
    - gpio: Add gpio-fsm driver
    - configs: Add CONFIG_GPIO_FSM=m
    - overlays: Add fsm-demo overlay
    - overlays: Add ghost-amp overlay
    - Fixes a problem when module probes before i2c module is available
    - uapi: Update V4L2_CID_USER_BCM2835_ISP_BASE due to upstream change
    - Revert "Bluetooth: Check key sizes only when Secure Simple Pairing is
      enabled"
    - dtoverlays: Correct CSI2 settings for ov9281
    - xhci: quirks: add link TRB quirk for VL805
    - dts: Add CM4 to arm64 dt files
    - dts: Tidy the Raspberry Pi Makefile entries
    - staging: bcm2835-audio: Add disable-headphones flag
    - ARM: dts: Disable headphone audio on Zeroes, CM4
    - overlays: Enable headphone audio in audremap
    - rpisense-fb: Set pseudo_pallete to prevent crash on fbcon takeover
    - PiFi-40 defconfigs
    - PiFi-40 Devicetree files
    - PiFi-40 driver, Makefile and Kconfig
    - dwc_otg: Minimise header and fix build warnings
    - gpio-fsm: Fix a build warning
    - rpivid_h625: Fix build warnings
    - dwc_otg: Fix more build warnings
    - bcm2708_fb: Fix a build warning
    - bcm2835-pcm: Fix up multichannel pcm audio
    - watchdog: bcm2835: Ignore params after the partition number
    - firmware: raspberrypi: Add support for tryonce reboot flag
    - phy: broadcom: split out the BCM54213PE from the BCM54210E IDs
    - phy: broadcom: Add bcm54213pe configuration
    - Allo boss2 driver
    - Add allo boss2 overlay
    - Add allo boss2 config
    - Revert "mailbox: avoid timer start from callback"
    - ARM: dts: Add bcm2711-rpi-400.dts
    - overlays: Deprecate and delete the sdtweak overlay
    - overlays: Complete the sdtweak excision
    - ARM: dts: bcm27xx: Remove enable_headphones setting
    - staging: vcsm-cma: Fix memory leak from not detaching dmabuf
    - Update Allo Piano Dac Driver for 5.4.y kernels
    - Overlay: Update Allo Piano Plus dac driver for 5.4.y kernels.
    - Update volume controls in Allo Piano Dac Plus
    - can: rx-offload: can_rx_offload_add_manual(): add new initialization
      function
    - dt-binding: can: mcp25xxfd: document device tree bindings
    - can: mcp25xxfd: add regmap infrastructure
    - can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN
    - can: mcp25xxfd: add listen-only mode
    - can: mcp25xxfd: mcp25xxfd_handle_eccif(): add ECC related errata and update
      log messages
    - can: mcp25xxfd: mcp25xxfd_probe(): add SPI clk limit related errata
      information
    - can: mcp25xxfd: mcp25xxfd_ring_free(): fix memory leak during cleanup
    - can: mcp25xxfd: mcp25xxfd_irq(): add missing initialization of variable
      set_normal mode
    - dt-binding: can: mcp25xxfd: documentation fixes
    - dt-binding: can: mcp251xfd: narrow down wildcards in device tree bindings to
      "microchip,mcp251xfd"
    - can: mcp25xxfd: narrow down wildcards in device tree bindings to
      "microchip,mcp251xfd"
    - can: mcp251xfd: rename driver files and subdir to mcp251xfd
    - can: mcp251xfd: rename all user facing strings to mcp251xfd
    - can: mcp251xfd: rename all remaining occurrence to mcp251xfd
    - can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read
      error messages
    - can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
    - can: mcp251xfd: remove unneeded break
    - mcp251xfd: add overlay
    - Add mcp251xfd driver as module to RPI build configuration
    - media: i2c: imx219: Selection compliance fixes
    - media: bcm2835-unicam: Correctly handle error propagation for stream on
    - media: bcm2835-unicam: Return early from stop_streaming() if stopped
    - media: bcm2835-unicam: Clear clock state when stopping streaming
    - ARM: dts: CM4 audio pins are not connected
    - configs: Add RTC_DRV_PCF85063=m
    - overlays: Add PCF85063 and PCF85063A to i2c-rtc
    - overlays: Fix cut-and-paste error in README
    - media: i2c: imx477: Selection compliance fixes
    - SAUCE: net: bcmgenet: Remove empty line to match upstream
    - [Config] raspi: updateconfigs after update to rpi-5.4.y 2020-12-10

[ Ubuntu: 5.4.0-60.67 ]

* Packaging resync (LP: #1786013)
    - [Packaging] update variants
    - update dkms package versions
  * CVE-2021-1052 // CVE-2021-1053
    - [Packaging] NVIDIA -- Add the NVIDIA 460 driver

-- Kleber Sacilotto de Souza <kleber.souza@canonical.com>  Wed, 20 Jan 2021 11:27:41 +0100

Changed in linux-raspi (Ubuntu Focal):
status:	Fix Committed → Fix Released

Report a bug

This report contains Public information

Everyone can see this information.

You are

Subscribing...

Edit bug mail

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.

Ubuntulinux-raspi package