BUG: kernel NULL pointer dereference, address: 0000000000000008
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Confirmed
|
Undecided
|
Unassigned | ||
Bionic |
Fix Released
|
Undecided
|
Unassigned | ||
linux-hwe-5.4 (Ubuntu) |
Confirmed
|
Undecided
|
Unassigned | ||
Bionic |
Confirmed
|
Undecided
|
Unassigned | ||
linux-hwe-6.2 (Ubuntu) |
New
|
Undecided
|
Unassigned | ||
Bionic |
New
|
Undecided
|
Unassigned |
Bug Description
Hi,
On one of the main US Ubuntu Archive servers (banjo), we decided to reboot into a HWE kernel. The latest being 5.4.0-122 but on doing so, ran into this kernel panic:
| [ 350.776585] BUG: kernel NULL pointer dereference, address: 0000000000000008
| [ 350.783674] #PF: supervisor read access in kernel mode
| [ 350.788846] #PF: error_code(0x0000) - not-present page
| [ 350.794019] PGD 0 P4D 0
| [ 350.796631] Oops: 0000 [#1] SMP NOPTI
| [ 350.800425] CPU: 8 PID: 0 Comm: swapper/8 Not tainted 5.4.0-122-generic #138~18.04.1-Ubuntu
| [ 350.808918] Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 02/10/2022
| [ 350.817666] RIP: 0010:tcp_
| [ 350.823187] Code: 08 00 00 41 8b 84 24 18 01 00 00 48 c7 83 80 08 00 00 00 00 00 00 4c 89 e6 4c 89 ef 89 83 c4 05 00 00 49 8b 84 24 f8 00 00 00 <48> 8b 40 08 e8 96 28 42 00 48 85 c0 0f b7 83 68 05 00 00 74 0a 83
| [ 350.842068] RSP: 0018:ffff9a958c
| [ 350.847324] RAX: 0000000000000000 RBX: ffff897618739c80 RCX: 0000000000000007
| [ 350.854502] RDX: 0000000000000020 RSI: ffff897607afb0b0 RDI: ffff897605c85580
| [ 350.861682] RBP: ffff9a958cce8878 R08: 0000000000000178 R09: ffff89763e407800
| [ 350.868859] R10: 00000000000004c4 R11: ffff9a958cce89c7 R12: ffff897607afb0b0
| [ 350.876039] R13: ffff897605c85580 R14: ffff8976205fbe00 R15: ffff89762688b400
| [ 350.883219] FS: 000000000000000
| [ 350.891358] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
| [ 350.897138] CR2: 0000000000000008 CR3: 0000001fd7914000 CR4: 0000000000340ee0
| [ 350.904319] Call Trace:
| [ 350.906787] <IRQ>
| [ 350.908824] tcp_v6_
| [ 350.913259] ? ip6_route_
| [ 350.918435] tcp_get_
| [ 350.922688] cookie_
| [ 350.926714] tcp_v6_
| [ 350.930589] ? tcp_v6_
| [ 350.934589] tcp_v6_
| [ 350.938102] ip6_protocol_
| [ 350.942750] ip6_input+0x41/0xb0
| [ 350.946000] ip6_sublist_
| [ 350.950385] ip6_sublist_
| [ 350.954333] ? __netif_
| [ 350.959245] ipv6_list_
| [ 350.963018] __netif_
| [ 350.968192] ? build_skb+0x17/0x80
| [ 350.971615] netif_receive_
| [ 350.976961] gro_normal_
| [ 350.981519] napi_complete_
| [ 350.985700] mlx5e_napi_
| [ 350.990697] net_rx_
| [ 350.994475] __do_softirq+
| [ 350.998079] irq_exit+0xae/0xb0
| [ 351.001239] do_IRQ+0x59/0xe0
| [ 351.004228] common_
| [ 351.007913] </IRQ>
| [ 351.010029] RIP: 0010:cpuidle_
| [ 351.015023] Code: ff e8 b8 ca 80 ff 80 7d d3 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 54 03 00 00 31 ff e8 4b 4f 87 ff fb 66 0f 1f 44 00 00 <45> 85 ed 0f 88 1a 03 00 00 4c 2b 7d c8 48 ba cf f7 53 e3 a5 9b c4
| [ 351.033952] RSP: 0018:ffff9a9580
| [ 351.041633] RAX: ffff89763ec2fe00 RBX: ffffffff84b66b40 RCX: 000000000000001f
| [ 351.048816] RDX: 00000051abe96150 RSI: 000000002abf3234 RDI: 0000000000000000
| [ 351.055997] RBP: ffff9a958026fe88 R08: 0000000000000002 R09: 000000000002f680
| [ 351.063176] R10: ffff9a958026fe18 R11: 0000000000000115 R12: ffff8976274c3800
| [ 351.070355] R13: 0000000000000001 R14: ffffffff84b66bb8 R15: 00000051abe96150
| [ 351.077540] ? cpuidle_
| [ 351.081930] ? menu_select+
| [ 351.085706] cpuidle_
| [ 351.089310] call_cpuidle+
| [ 351.092821] do_idle+0x1f6/0x270
| [ 351.096069] cpu_startup_
| [ 351.100024] start_secondary
| [ 351.103977] secondary_
| [ 351.108186] Modules linked in: binfmt_misc bonding nls_iso8859_1 ipmi_ssif edac_mce_amd kvm_amd kvm hpilo ccp ipmi_si ipmi_devintf ipmi_msghandler acpi_tad k10temp mac_hid acpi_power_meter sch_fq tcp_bbr ib_iser rdma_cm iw_cm ib_cm iscsi_tcp libiscsi_tcp libiscsi scsi_transport_
| [ 351.180156] CR2: 0000000000000008
| [ 351.183629] ---[ end trace 23210cdf0c6d5851 ]---
| [ 351.322276] RIP: 0010:tcp_
| [ 351.327974] Code: 08 00 00 41 8b 84 24 18 01 00 00 48 c7 83 80 08 00 00 00 00 00 00 4c 89 e6 4c 89 ef 89 83 c4 05 00 00 49 8b 84 24 f8 00 00 00 <48> 8b 40 08 e8 96 28 42 00 48 85 c0 0f b7 83 68 05 00 00 74 0a 83
| [ 351.346878] RSP: 0018:ffff9a958c
| [ 351.352166] RAX: 0000000000000000 RBX: ffff897618739c80 RCX: 0000000000000007
| [ 351.359348] RDX: 0000000000000020 RSI: ffff897607afb0b0 RDI: ffff897605c85580
| [ 351.366526] RBP: ffff9a958cce8878 R08: 0000000000000178 R09: ffff89763e407800
| [ 351.373705] R10: 00000000000004c4 R11: ffff9a958cce89c7 R12: ffff897607afb0b0
| [ 351.380886] R13: ffff897605c85580 R14: ffff8976205fbe00 R15: ffff89762688b400
| [ 351.388065] FS: 000000000000000
| [ 351.396203] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
| [ 351.401982] CR2: 0000000000000008 CR3: 0000001fd7914000 CR4: 0000000000340ee0
| [ 351.409162] Kernel panic - not syncing: Fatal exception in interrupt
| [ 351.415613] Kernel Offset: 0x2000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000
| [ 351.437793] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Per ~IS-Outage on Mattermost, tried various other older kernels and it seems -121 is working fine so looks to be introduced in -122.
| [hloeung@banjo ~]$ lsb_release -a
| No LSB modules are available.
| Distributor ID: Ubuntu
| Description: Ubuntu 18.04.6 LTS
| Release: 18.04
| Codename: bionic
---
ProblemType: Bug
AlsaDevices:
total 0
crw-rw---- 1 root audio 116, 1 Jul 14 03:13 seq
crw-rw---- 1 root audio 116, 33 Jul 14 03:13 timer
AplayDevices: Error: [Errno 2] No such file or directory: 'aplay': 'aplay'
ApportVersion: 2.20.9-0ubuntu7.28
Architecture: amd64
ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord': 'arecord'
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
DistroRelease: Ubuntu 18.04
IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig': 'iwconfig'
MachineType: HPE ProLiant DL385 Gen10
Package: linux-hwe-5.4
PciMultimedia:
ProcEnviron:
TERM=xterm-
PATH=(custom, no user)
XDG_RUNTIME_
LANG=en_US.utf8
SHELL=/bin/bash
ProcFB: 0 mgag200drmfb
ProcKernelCmdLine: BOOT_IMAGE=
ProcVersionSign
RelatedPackageV
linux-
linux-
linux-firmware 1.173.21
RfKill: Error: [Errno 2] No such file or directory: 'rfkill': 'rfkill'
Tags: bionic
Uname: Linux 5.4.0-121-generic x86_64
UpgradeStatus: Upgraded to bionic on 2019-12-16 (940 days ago)
UserGroups: adm
_MarkForUpload: True
dmi.bios.date: 02/10/2022
dmi.bios.vendor: HPE
dmi.bios.version: A40
dmi.board.name: ProLiant DL385 Gen10
dmi.board.vendor: HPE
dmi.chassis.type: 23
dmi.chassis.vendor: HPE
dmi.modalias: dmi:bvnHPE:
dmi.product.family: ProLiant
dmi.product.name: ProLiant DL385 Gen10
dmi.product.sku: 878615-B21
dmi.sys.vendor: HPE
description: | updated |
description: | updated |
Changed in linux (Ubuntu Bionic): | |
status: | Confirmed → In Progress |
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window:
apport-collect 1981658
and then change the status of the bug to 'Confirmed'.
If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'.
This change has been made by an automated script, maintained by the Ubuntu Kernel Team.