[ 9.819] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 9.819] X Protocol Version 11, Revision 0 [ 9.819] Build Operating System: Linux 3.2.0-32-generic x86_64 Ubuntu [ 9.819] Current Operating System: Linux resist 3.7.0-4-generic #12-Ubuntu SMP Tue Nov 27 23:13:21 UTC 2012 x86_64 [ 9.819] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-4-generic root=UUID=175800e0-cc7f-4820-8df3-7ae1df07f80e ro [ 9.819] Build Date: 19 November 2012 10:27:57AM [ 9.819] xorg-server 2:1.13.0-0ubuntu8 (For technical support please see http://www.ubuntu.com/support) [ 9.819] Current version of pixman: 0.26.0 [ 9.819] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 9.819] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 9.819] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 5 11:35:55 2012 [ 9.825] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 9.832] (==) No Layout section. Using the first Screen section. [ 9.832] (==) No screen section available. Using defaults. [ 9.832] (**) |-->Screen "Default Screen Section" (0) [ 9.832] (**) | |-->Monitor "" [ 9.833] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 9.833] (==) Automatically adding devices [ 9.833] (==) Automatically enabling devices [ 9.833] (==) Automatically adding GPU devices [ 9.842] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 9.842] Entry deleted from font path. [ 9.866] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 9.866] Entry deleted from font path. [ 9.868] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 9.868] Entry deleted from font path. [ 9.868] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 9.868] Entry deleted from font path. [ 9.868] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 9.868] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 9.868] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 9.868] (II) Loader magic: 0x7f7ef645bc40 [ 9.868] (II) Module ABI versions: [ 9.868] X.Org ANSI C Emulation: 0.4 [ 9.868] X.Org Video Driver: 13.0 [ 9.868] X.Org XInput driver : 18.0 [ 9.868] X.Org Server Extension : 7.0 [ 9.868] (II) config/udev: Adding drm device (/dev/dri/card0) [ 9.938] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xd0000000/134217728, 0xc8800000/8388608, I/O @ 0x000010d0/16, BIOS @ 0x????????/32768 [ 9.939] (II) Open ACPI successful (/var/run/acpid.socket) [ 9.941] Initializing built-in extension Generic Event Extension [ 9.941] Initializing built-in extension SHAPE [ 9.941] Initializing built-in extension MIT-SHM [ 9.941] Initializing built-in extension XInputExtension [ 9.941] Initializing built-in extension XTEST [ 9.941] Initializing built-in extension BIG-REQUESTS [ 9.941] Initializing built-in extension SYNC [ 9.941] Initializing built-in extension XKEYBOARD [ 9.941] Initializing built-in extension XC-MISC [ 9.941] Initializing built-in extension SECURITY [ 9.941] Initializing built-in extension XINERAMA [ 9.941] Initializing built-in extension XFIXES [ 9.941] Initializing built-in extension RENDER [ 9.941] Initializing built-in extension RANDR [ 9.941] Initializing built-in extension COMPOSITE [ 9.941] Initializing built-in extension DAMAGE [ 9.941] Initializing built-in extension MIT-SCREEN-SAVER [ 9.941] Initializing built-in extension DOUBLE-BUFFER [ 9.941] Initializing built-in extension RECORD [ 9.941] Initializing built-in extension DPMS [ 9.941] Initializing built-in extension X-Resource [ 9.941] Initializing built-in extension XVideo [ 9.941] Initializing built-in extension XVideo-MotionCompensation [ 9.941] Initializing built-in extension XFree86-VidModeExtension [ 9.941] Initializing built-in extension XFree86-DGA [ 9.941] Initializing built-in extension XFree86-DRI [ 9.941] Initializing built-in extension DRI2 [ 9.941] (II) LoadModule: "glx" [ 9.953] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 9.968] (II) Module glx: vendor="X.Org Foundation" [ 9.968] compiled for 1.13.0, module version = 1.0.0 [ 9.968] ABI class: X.Org Server Extension, version 7.0 [ 9.968] (==) AIGLX enabled [ 9.969] Loading extension GLX [ 9.969] (==) Matched vmware as autoconfigured driver 0 [ 9.969] (==) Matched vmware as autoconfigured driver 1 [ 9.969] (==) Matched vesa as autoconfigured driver 2 [ 9.969] (==) Matched modesetting as autoconfigured driver 3 [ 9.969] (==) Matched fbdev as autoconfigured driver 4 [ 9.969] (==) Assigned the driver to the xf86ConfigLayout [ 9.969] (II) LoadModule: "vmware" [ 9.971] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so [ 10.234] (II) Module vmware: vendor="X.Org Foundation" [ 10.234] compiled for 1.12.99.902, module version = 12.0.2 [ 10.234] Module class: X.Org Video Driver [ 10.234] ABI class: X.Org Video Driver, version 13.0 [ 10.234] (II) LoadModule: "vesa" [ 10.235] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 10.236] (II) Module vesa: vendor="X.Org Foundation" [ 10.236] compiled for 1.12.99.902, module version = 2.3.2 [ 10.236] Module class: X.Org Video Driver [ 10.236] ABI class: X.Org Video Driver, version 13.0 [ 10.236] (II) LoadModule: "modesetting" [ 10.236] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 10.239] (II) Module modesetting: vendor="X.Org Foundation" [ 10.239] compiled for 1.13.0, module version = 0.5.0 [ 10.239] Module class: X.Org Video Driver [ 10.239] ABI class: X.Org Video Driver, version 13.0 [ 10.239] (II) LoadModule: "fbdev" [ 10.247] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 10.253] (II) Module fbdev: vendor="X.Org Foundation" [ 10.253] compiled for 1.12.99.902, module version = 0.4.3 [ 10.253] Module class: X.Org Video Driver [ 10.253] ABI class: X.Org Video Driver, version 13.0 [ 10.253] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710 [ 10.253] (II) VESA: driver for VESA chipsets: vesa [ 10.253] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 10.253] (II) FBDEV: driver for framebuffer: fbdev [ 10.253] (++) using VT number 7 [ 10.253] (WW) Falling back to old probe method for vesa [ 10.253] (WW) Falling back to old probe method for modesetting [ 10.254] (WW) Falling back to old probe method for fbdev [ 10.254] (II) Loading sub module "fbdevhw" [ 10.254] (II) LoadModule: "fbdevhw" [ 10.254] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 10.256] (II) Module fbdevhw: vendor="X.Org Foundation" [ 10.256] compiled for 1.13.0, module version = 0.0.2 [ 10.256] ABI class: X.Org Video Driver, version 13.0 [ 10.256] (--) vmware(0): DRM driver version is 2.4.0 [ 10.256] (II) vmware(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 10.256] (==) vmware(0): Depth 24, (--) framebuffer bpp 32 [ 10.256] (==) vmware(0): RGB weight 888 [ 10.256] (==) vmware(0): Default visual is TrueColor [ 10.256] (--) vmware(0): Min width 1, Max Width 8192. [ 10.256] (--) vmware(0): Min height 1, Max Height 8192. [ 10.256] (II) vmware(0): Output Virtual1 has no monitor section [ 10.256] (II) vmware(0): Output Virtual2 has no monitor section [ 10.256] (II) vmware(0): Output Virtual3 has no monitor section [ 10.256] (II) vmware(0): Output Virtual4 has no monitor section [ 10.256] (II) vmware(0): Output Virtual5 has no monitor section [ 10.256] (II) vmware(0): Output Virtual6 has no monitor section [ 10.256] (II) vmware(0): Output Virtual7 has no monitor section [ 10.256] (II) vmware(0): Output Virtual8 has no monitor section [ 10.256] (II) vmware(0): Modeline "2560x1600"x60.0 348.50 2560 2752 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz e) [ 10.256] (II) vmware(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e) [ 10.256] (II) vmware(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e) [ 10.256] (II) vmware(0): Modeline "1856x1392"x60.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e) [ 10.256] (II) vmware(0): Modeline "1792x1344"x60.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e) [ 10.257] (II) vmware(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 10.257] (II) vmware(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 10.257] (II) vmware(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 10.257] (II) vmware(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e) [ 10.257] (II) vmware(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e) [ 10.257] (II) vmware(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 10.257] (II) vmware(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 10.257] (II) vmware(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e) [ 10.257] (II) vmware(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 10.257] (II) vmware(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 10.257] (II) vmware(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 10.257] (II) vmware(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 10.257] (II) vmware(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e) [ 10.257] (II) vmware(0): Modeline "1280x768"x60.0 78.76 1280 1330 1380 1430 768 818 868 918 -hsync +vsync (55.1 kHz eP) [ 10.257] (II) vmware(0): Printing probed modes for output Virtual1 [ 10.257] (II) vmware(0): Modeline "1280x768"x60.0 78.76 1280 1330 1380 1430 768 818 868 918 -hsync +vsync (55.1 kHz eP) [ 10.257] (II) vmware(0): Modeline "2560x1600"x60.0 348.50 2560 2752 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz e) [ 10.257] (II) vmware(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e) [ 10.257] (II) vmware(0): Modeline "1856x1392"x60.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e) [ 10.257] (II) vmware(0): Modeline "1792x1344"x60.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e) [ 10.257] (II) vmware(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e) [ 10.257] (II) vmware(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 10.257] (II) vmware(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 10.257] (II) vmware(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e) [ 10.257] (II) vmware(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 10.257] (II) vmware(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 10.257] (II) vmware(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 10.257] (II) vmware(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e) [ 10.257] (II) vmware(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e) [ 10.257] (II) vmware(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 10.257] (II) vmware(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 10.257] (II) vmware(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 10.257] (II) vmware(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 10.257] (II) vmware(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e) [ 10.257] (II) vmware(0): EDID for output Virtual2 [ 10.257] (II) vmware(0): EDID for output Virtual3 [ 10.257] (II) vmware(0): EDID for output Virtual4 [ 10.257] (II) vmware(0): EDID for output Virtual5 [ 10.257] (II) vmware(0): EDID for output Virtual6 [ 10.257] (II) vmware(0): EDID for output Virtual7 [ 10.257] (II) vmware(0): EDID for output Virtual8 [ 10.257] (II) vmware(0): Output Virtual1 connected [ 10.257] (II) vmware(0): Output Virtual2 disconnected [ 10.257] (II) vmware(0): Output Virtual3 disconnected [ 10.257] (II) vmware(0): Output Virtual4 disconnected [ 10.257] (II) vmware(0): Output Virtual5 disconnected [ 10.257] (II) vmware(0): Output Virtual6 disconnected [ 10.257] (II) vmware(0): Output Virtual7 disconnected [ 10.257] (II) vmware(0): Output Virtual8 disconnected [ 10.257] (II) vmware(0): Using exact sizes for initial modes [ 10.257] (II) vmware(0): Output Virtual1 using initial mode 1280x768 [ 10.257] (II) vmware(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 10.257] (==) vmware(0): DPI set to (96, 96) [ 10.257] (II) Loading sub module "fb" [ 10.257] (II) LoadModule: "fb" [ 10.257] (II) Loading /usr/lib/xorg/modules/libfb.so [ 10.264] (II) Module fb: vendor="X.Org Foundation" [ 10.264] compiled for 1.13.0, module version = 1.0.0 [ 10.264] ABI class: X.Org ANSI C Emulation, version 0.4 [ 10.264] (II) Loading sub module "dri2" [ 10.264] (II) LoadModule: "dri2" [ 10.264] (II) Module "dri2" already built-in [ 10.264] (II) UnloadModule: "vesa" [ 10.264] (II) Unloading vesa [ 10.264] (II) UnloadModule: "modesetting" [ 10.264] (II) Unloading modesetting [ 10.264] (II) UnloadModule: "fbdev" [ 10.264] (II) Unloading fbdev [ 10.264] (II) UnloadSubModule: "fbdevhw" [ 10.264] (II) Unloading fbdevhw [ 10.264] (==) Depth 24 pixmap format is 32 bpp [ 10.270] (II) vmware(0): Initialized VMWARE_CTRL extension version 0.2 [ 10.314] (II) vmware(0): Gallium3D XA version: 1.0.0. [ 10.314] (II) vmware(0): Path of drm device is "/dev/dri/card0". [ 10.314] (II) vmware(0): [DRI2] Setup complete [ 10.314] (II) vmware(0): [DRI2] DRI driver: vmwgfx [ 10.314] (--) vmware(0): Render acceleration is enabled. [ 10.314] (==) vmware(0): Rendercheck mode is disabled. [ 10.314] (--) vmware(0): Direct rendering (3D) is enabled. [ 10.314] (==) vmware(0): Direct presents are disabled. [ 10.314] (==) vmware(0): Hardware only presents are disabled. [ 10.314] (==) vmware(0): Backing store disabled [ 10.314] (==) vmware(0): Silken mouse enabled [ 10.314] (II) vmware(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 10.316] (==) vmware(0): DPMS enabled [ 10.317] (--) RandR disabled [ 10.462] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 10.462] (II) AIGLX: enabled GLX_INTEL_swap_event [ 10.462] (II) AIGLX: enabled GLX_ARB_create_context [ 10.462] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 10.462] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 10.462] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 10.463] (II) AIGLX: Loaded and initialized vmwgfx [ 10.463] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 10.470] (II) vmware(0): Setting screen physical size to 338 x 203 [ 10.568] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 10.577] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 10.578] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 10.578] (II) LoadModule: "evdev" [ 10.582] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 10.588] (II) Module evdev: vendor="X.Org Foundation" [ 10.588] compiled for 1.13.0, module version = 2.7.3 [ 10.588] Module class: X.Org XInput Driver [ 10.588] ABI class: X.Org XInput driver, version 18.0 [ 10.588] (II) Using input driver 'evdev' for 'Power Button' [ 10.588] (**) Power Button: always reports core events [ 10.588] (**) evdev: Power Button: Device: "/dev/input/event0" [ 10.588] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 10.588] (--) evdev: Power Button: Found keys [ 10.588] (II) evdev: Power Button: Configuring as keyboard [ 10.588] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0" [ 10.588] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 10.588] (**) Option "xkb_rules" "evdev" [ 10.589] (**) Option "xkb_model" "pc105" [ 10.589] (**) Option "xkb_layout" "us" [ 10.589] (II) config/udev: Adding drm device (/dev/dri/card0) [ 10.589] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/event2) [ 10.589] (**) VMware VMware Virtual USB Mouse: Applying InputClass "evdev pointer catchall" [ 10.589] (II) Using input driver 'evdev' for 'VMware VMware Virtual USB Mouse' [ 10.589] (**) VMware VMware Virtual USB Mouse: always reports core events [ 10.589] (**) evdev: VMware VMware Virtual USB Mouse: Device: "/dev/input/event2" [ 10.589] (--) evdev: VMware VMware Virtual USB Mouse: Vendor 0xe0f Product 0x3 [ 10.589] (--) evdev: VMware VMware Virtual USB Mouse: Found 20 mouse buttons [ 10.589] (--) evdev: VMware VMware Virtual USB Mouse: Found scroll wheel(s) [ 10.589] (--) evdev: VMware VMware Virtual USB Mouse: Found relative axes [ 10.589] (--) evdev: VMware VMware Virtual USB Mouse: Found absolute axes [ 10.589] (--) evdev: VMware VMware Virtual USB Mouse: Found x and y absolute axes [ 10.589] (--) evdev: VMware VMware Virtual USB Mouse: Found absolute touchscreen [ 10.589] (II) evdev: VMware VMware Virtual USB Mouse: Configuring as touchscreen [ 10.589] (II) evdev: VMware VMware Virtual USB Mouse: Adding scrollwheel support [ 10.589] (**) evdev: VMware VMware Virtual USB Mouse: YAxisMapping: buttons 4 and 5 [ 10.589] (**) evdev: VMware VMware Virtual USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 10.589] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/2-1:1.0/input/input2/event2" [ 10.589] (II) XINPUT: Adding extended input device "VMware VMware Virtual USB Mouse" (type: TOUCHSCREEN, id 7) [ 10.590] (WW) evdev: VMware VMware Virtual USB Mouse: touchpads, tablets and touchscreens ignore relative axes. [ 10.590] (II) evdev: VMware VMware Virtual USB Mouse: initialized for absolute axes. [ 10.590] (**) VMware VMware Virtual USB Mouse: (accel) keeping acceleration scheme 1 [ 10.590] (**) VMware VMware Virtual USB Mouse: (accel) acceleration profile 0 [ 10.590] (**) VMware VMware Virtual USB Mouse: (accel) acceleration factor: 2.000 [ 10.590] (**) VMware VMware Virtual USB Mouse: (accel) acceleration threshold: 4 [ 10.590] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/js0) [ 10.590] (II) No input driver specified, ignoring this device. [ 10.590] (II) This device may have been added with another device file. [ 10.590] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/mouse0) [ 10.590] (II) No input driver specified, ignoring this device. [ 10.590] (II) This device may have been added with another device file. [ 10.591] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/event3) [ 10.591] (**) VMware VMware Virtual USB Mouse: Applying InputClass "evdev pointer catchall" [ 10.591] (II) Using input driver 'evdev' for 'VMware VMware Virtual USB Mouse' [ 10.591] (**) VMware VMware Virtual USB Mouse: always reports core events [ 10.591] (**) evdev: VMware VMware Virtual USB Mouse: Device: "/dev/input/event3" [ 10.591] (--) evdev: VMware VMware Virtual USB Mouse: Vendor 0xe0f Product 0x3 [ 10.591] (--) evdev: VMware VMware Virtual USB Mouse: Found 20 mouse buttons [ 10.591] (--) evdev: VMware VMware Virtual USB Mouse: Found scroll wheel(s) [ 10.591] (--) evdev: VMware VMware Virtual USB Mouse: Found relative axes [ 10.591] (--) evdev: VMware VMware Virtual USB Mouse: Found x and y relative axes [ 10.591] (II) evdev: VMware VMware Virtual USB Mouse: Configuring as mouse [ 10.591] (II) evdev: VMware VMware Virtual USB Mouse: Adding scrollwheel support [ 10.591] (**) evdev: VMware VMware Virtual USB Mouse: YAxisMapping: buttons 4 and 5 [ 10.591] (**) evdev: VMware VMware Virtual USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 10.591] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/2-1:1.1/input/input3/event3" [ 10.591] (II) XINPUT: Adding extended input device "VMware VMware Virtual USB Mouse" (type: MOUSE, id 8) [ 10.591] (II) evdev: VMware VMware Virtual USB Mouse: initialized for relative axes. [ 10.591] (**) VMware VMware Virtual USB Mouse: (accel) keeping acceleration scheme 1 [ 10.591] (**) VMware VMware Virtual USB Mouse: (accel) acceleration profile 0 [ 10.591] (**) VMware VMware Virtual USB Mouse: (accel) acceleration factor: 2.000 [ 10.591] (**) VMware VMware Virtual USB Mouse: (accel) acceleration threshold: 4 [ 10.591] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/mouse1) [ 10.591] (II) No input driver specified, ignoring this device. [ 10.591] (II) This device may have been added with another device file. [ 10.591] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1) [ 10.591] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 10.591] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 10.591] (**) AT Translated Set 2 keyboard: always reports core events [ 10.591] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event1" [ 10.596] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 10.596] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 10.596] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 10.596] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event1" [ 10.596] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 10.596] (**) Option "xkb_rules" "evdev" [ 10.596] (**) Option "xkb_model" "pc105" [ 10.596] (**) Option "xkb_layout" "us" [ 10.597] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event4) [ 10.597] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall" [ 10.597] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "vmmouse" [ 10.597] (II) LoadModule: "vmmouse" [ 10.597] (II) Loading /usr/lib/xorg/modules/input/vmmouse_drv.so [ 10.601] (II) Module vmmouse: vendor="X.Org Foundation" [ 10.601] compiled for 1.13.0, module version = 12.9.0 [ 10.601] Module class: X.Org XInput Driver [ 10.601] ABI class: X.Org XInput driver, version 18.0 [ 10.601] (II) VMWARE(0): VMMOUSE module was loaded [ 10.601] (II) Using input driver 'vmmouse' for 'ImPS/2 Generic Wheel Mouse' [ 10.601] (**) ImPS/2 Generic Wheel Mouse: always reports core events [ 10.602] (II) VMWARE(0): vmmouse is available [ 10.602] (**) Option "Device" "/dev/input/event4" [ 10.602] (**) ImPS/2 Generic Wheel Mouse: ZAxisMapping: buttons 4 and 5 [ 10.602] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4" [ 10.602] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10) [ 10.602] (II) VMWARE(0): VMMOUSE DEVICE_INIT [ 10.602] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1 [ 10.602] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0 [ 10.602] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000 [ 10.602] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4 [ 10.602] (II) VMWARE(0): VMMOUSE DEVICE_ON [ 10.602] (II) VMWARE(0): vmmouse enabled [ 10.602] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse2) [ 10.602] (II) No input driver specified, ignoring this device. [ 10.602] (II) This device may have been added with another device file. [ 13.649] (II) VMWARE(0): VMMOUSE DEVICE_OFF/CLOSE [ 13.950] (II) VMWARE(0): VMMOUSE DEVICE_OFF/CLOSE [ 14.251] (II) VMWARE(0): VMMouseUnInit [ 14.251] (II) evdev: AT Translated Set 2 keyboard: Close [ 14.251] (II) UnloadModule: "evdev" [ 14.251] (II) evdev: VMware VMware Virtual USB Mouse: Close [ 14.251] (II) UnloadModule: "evdev" [ 14.251] (II) evdev: VMware VMware Virtual USB Mouse: Close [ 14.251] (II) UnloadModule: "evdev" [ 14.251] (II) evdev: Power Button: Close [ 14.251] (II) UnloadModule: "evdev" [ 14.584] Server terminated successfully (0). Closing log file.