Hibernation problem in Acer Aspire one 532H After Installing Updates

+1. Also with final version. Very annoying.

./mario

The same issue with Acer Aspire One ZG5 in Release Ubuntu 11.04

+1 with Acer Aspire One ZG5 and Ubuntu 11.04

The same issue with Asus EEE PC 1001PX and Ubuntu 11.04

Same thing with Aspire One D255E and Final Natty

Same on Asus EEE 1005HA. Strange bug, looks like some video driver issue. So, in 11.4 hibernation does not work at all.

same thing on dell studio 1558...
please work onit. i dont want wndows back arrrrrrrrrrrrrrrrrr

Here's an interesting trick, that solved the problem for me, sort of:

When the screen hangs after waking up from hibernate, go into _suspend_ and wake back up from suspend. That should give you back a normal screen.

Perhaps this trick might work for you too (as a kluge solution) until the driver/whatever other issue gets resolved.

@Amar

How to go to suspend after hibernating..The scren will be with different colours,and you are unable to type your password,how can we go to suspend mode.

Can you elaborate it properly,so that we can also do that

+1 with Samsung N140, using final version of Natty

Also seen on my Acer Aspire One A150. Intel 945GME graphics, kernel module i915.

@varun kumar, for me there are two ways to suspend:

(1) Although the screen is garbled, the dialogue asking for your password is there - just type it and hit return. On my screen, the left hand 25% is clean, so I can find the power down options and suspend.

(2) Alternatively, and much more simply, I can just close the screen/lid. With the correct power management options, the PC will suspend.

See also bug #780923

Hi I hope this helps, but after a bit of investigation, I found that my hibernation stopped working because of IPMI. For some reason, modprobe was stuck on the openipmi module, causing the system to hang on either shutdown or hibernation. The current work around was to disable the following services:

ipmievd and openipmi

I did that by simply moving the /etc/init.d files as follows:

mv /etc/init.d/ipmievd /etc/init.d/ipmievd-bak

mv /etc/init.d/openipmi /etc/init.d/openipmi-bak

I hope this helps...

Same problem with Samsung NC10 - Final Version of Natty

L Martins, I didn't find the files you mentioned. I see nobody from Canonical is interested about this issue...

I don't have the files too . Can be this the problem?

+1 on Acer Aspire One 531h after upgrading from 10.10 to 11.04 yesterday. Cannot find the files L Martin mentioned, too.

So did everyone affected an upgrade? Or does this also appear on a clean install?

Downgraded to LTS edition and happy with it

Performed clean install on an acer aspire one. I just tried hibernation today and the bug affects me too.
I can also confirm what Amar said about going into suspend and resuming again fixes the issue (until the next hibernation of course)
Also I do not have any ipmi related files in /etc/init.d so it doesn't seem to be related

Same problem with Itautec w7655 - Final Version of Natty.

Specification:

H/W path Device Class Description
====================================================
                             system Infoway ()
/0 bus Motherboard
/0/0 memory 107KiB BIOS
/0/2 bus W7655
/0/4 processor Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz
/0/4/5 memory 64KiB L1 cache
/0/4/6 memory 2MiB L2 cache
/0/4/1.1 processor Logical CPU
/0/4/1.2 processor Logical CPU
/0/15 memory 4GiB System Memory
/0/15/0 memory 2GiB SODIMM DDR2 Synchronous 800 MHz (1,2 ns)
/0/15/1 memory 2GiB SODIMM DDR2 Synchronous 800 MHz (1,2 ns)
/0/1 processor
/0/1/1.1 processor Logical CPU
/0/1/1.2 processor Logical CPU
/0/100 bridge Mobile 4 Series Chipset Memory Controller Hub
/0/100/2 display Mobile 4 Series Chipset Integrated Graphics Controller
/0/100/2.1 display Mobile 4 Series Chipset Integrated Graphics Controller
/0/100/1a bus 82801I (ICH9 Family) USB UHCI Controller #4
/0/100/1a.1 bus 82801I (ICH9 Family) USB UHCI Controller #5
/0/100/1a.2 bus 82801I (ICH9 Family) USB UHCI Controller #6
/0/100/1a.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #2
/0/100/1b multimedia 82801I (ICH9 Family) HD Audio Controller
/0/100/1c bridge 82801I (ICH9 Family) PCI Express Port 1
/0/100/1c.5 bridge 82801I (ICH9 Family) PCI Express Port 6
/0/100/1c.5/0 eth0 network RTL8111/8168B PCI Express Gigabit Ethernet controller
/0/100/1d bus 82801I (ICH9 Family) USB UHCI Controller #1
/0/100/1d.1 bus 82801I (ICH9 Family) USB UHCI Controller #2
/0/100/1d.2 bus 82801I (ICH9 Family) USB UHCI Controller #3
/0/100/1d.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #1
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1f bridge ICH9M LPC Interface Controller
/0/100/1f.2 scsi0 storage ICH9M/M-E SATA AHCI Controller
/0/100/1f.2/0 /dev/sda disk 320GB WDC WD3200BEVT-0
/0/100/1f.2/0/1 /dev/sda1 volume 3814MiB Linux swap / Solaris partition
/0/100/1f.2/0/2 /dev/sda2 volume 18GiB EXT4 volume
/0/100/1f.2/0/3 /dev/sda3 volume 275GiB EXT4 volume
/0/100/1f.2/1 /dev/cdrom disk DVD RW AD-7560S
/0/100/1f.3 bus 82801I (ICH9 Family) SMBus Controller
/0/3 scsi6 storage
/0/3/0.0.0 /dev/sdb disk SCSI Disk
/1 power To Be Defined By O.E.M
/2 wlan0 network Wireless interface

Same problem with Itautec w7655 - Final Version of Natty.

Specification:

H/W path Device Class Description
====================================================
                             system Infoway ()
/0 bus Motherboard
/0/0 memory 107KiB BIOS
/0/2 bus W7655
/0/4 processor Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz
/0/4/5 memory 64KiB L1 cache
/0/4/6 memory 2MiB L2 cache
/0/4/1.1 processor Logical CPU
/0/4/1.2 processor Logical CPU
/0/15 memory 4GiB System Memory
/0/15/0 memory 2GiB SODIMM DDR2 Synchronous 800 MHz (1,2 ns)
/0/15/1 memory 2GiB SODIMM DDR2 Synchronous 800 MHz (1,2 ns)
/0/1 processor
/0/1/1.1 processor Logical CPU
/0/1/1.2 processor Logical CPU
/0/100 bridge Mobile 4 Series Chipset Memory Controller Hub
/0/100/2 display Mobile 4 Series Chipset Integrated Graphics Controller
/0/100/2.1 display Mobile 4 Series Chipset Integrated Graphics Controller
/0/100/1a bus 82801I (ICH9 Family) USB UHCI Controller #4
/0/100/1a.1 bus 82801I (ICH9 Family) USB UHCI Controller #5
/0/100/1a.2 bus 82801I (ICH9 Family) USB UHCI Controller #6
/0/100/1a.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #2
/0/100/1b multimedia 82801I (ICH9 Family) HD Audio Controller
/0/100/1c bridge 82801I (ICH9 Family) PCI Express Port 1
/0/100/1c.5 bridge 82801I (ICH9 Family) PCI Express Port 6
/0/100/1c.5/0 eth0 network RTL8111/8168B PCI Express Gigabit Ethernet controller
/0/100/1d bus 82801I (ICH9 Family) USB UHCI Controller #1
/0/100/1d.1 bus 82801I (ICH9 Family) USB UHCI Controller #2
/0/100/1d.2 bus 82801I (ICH9 Family) USB UHCI Controller #3
/0/100/1d.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #1
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1f bridge ICH9M LPC Interface Controller
/0/100/1f.2 scsi0 storage ICH9M/M-E SATA AHCI Controller
/0/100/1f.2/0 /dev/sda disk 320GB WDC WD3200BEVT-0
/0/100/1f.2/0/1 /dev/sda1 volume 3814MiB Linux swap / Solaris partition
/0/100/1f.2/0/2 /dev/sda2 volume 18GiB EXT4 volume
/0/100/1f.2/0/3 /dev/sda3 volume 275GiB EXT4 volume
/0/100/1f.2/1 /dev/cdrom disk DVD RW AD-7560S
/0/100/1f.3 bus 82801I (ICH9 Family) SMBus Controller
/0/3 scsi6 storage
/0/3/0.0.0 /dev/sdb disk SCSI Disk
/1 power To Be Defined By O.E.M
/2 wlan0 network Wireless interface

Hello

With my Aspire One D255E I have te same issue. However when I get back from hibernation I still see the right hand side of the screen, so only the majority on the left is scrambled.

I also found that solution: go into suspend and go back. The screen gets back to normal. Switching screens with ctrl+alt+Fx (x - number 1-7) does not work either.

Any other solution to that issue?