[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410f0000] [ 0.000000] Linux version 5.15.0-41-generic (buildd@bos02-arm64-014) (gcc (Ubuntu 11.2.0-19ubuntu1) 11.2.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #44-Ubuntu SMP Thu Jun 23 11:20:13 UTC 2022 (Ubuntu 5.15.0-41.44-generic 5.15.39) [ 0.000000] Machine model: Parallels ARM Virtual Machine [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: SMBIOS 3.0=0x23f7f0000 ACPI 2.0=0x23c120000 MEMATTR=0x23e1b3a98 MOKvar=0x23e1a1000 MEMRESERVE=0x23bf0c798 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000023fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x23ec13f80-0x23ec18fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fffeffff] [ 0.000000] node 0: [mem 0x00000000ffff0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023c04ffff] [ 0.000000] node 0: [mem 0x000000023c050000-0x000000023c10ffff] [ 0.000000] node 0: [mem 0x000000023c110000-0x000000023f5fffff] [ 0.000000] node 0: [mem 0x000000023f600000-0x000000023f9dffff] [ 0.000000] node 0: [mem 0x000000023f9e0000-0x000000023fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000023fffffff] [ 0.000000] cma: Reserved 32 MiB at 0x00000000fd000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 30 pages/cpu s83160 r8192 d31528 u122880 [ 0.000000] pcpu-alloc: s83160 r8192 d31528 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Address authentication (IMP DEF algorithm) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2064384 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-41-generic root=UUID=5a14ccf7-6bac-47b7-a3d6-6c10822fb10d ro [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-5.15.0-41-generic", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000f9000000-0x00000000fd000000] (64MB) [ 0.000000] Memory: 8013820K/8388608K available (17280K kernel code, 4558K rwdata, 13816K rodata, 9600K init, 1192K bss, 342020K reserved, 32768K cma-reserved) [ 0.000000] random: get_random_u64 called from kmem_cache_open+0x30/0x390 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 53973 entries in 211 pages [ 0.000000] ftrace: allocated 211 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: 96 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000002500000 [ 0.000000] GICv2m: range[mem 0x02250000-0x02250fff], SPI[53:116] [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000025] Console: colour dummy device 80x25 [ 0.000057] printk: console [tty0] enabled [ 0.000073] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000075] pid_max: default: 32768 minimum: 301 [ 0.000098] LSM: Security Framework initializing [ 0.000102] landlock: Up and running. [ 0.000103] Yama: becoming mindful. [ 0.000129] AppArmor: AppArmor initialized [ 0.000180] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000253] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000567] rcu: Hierarchical SRCU implementation. [ 0.000747] Remapping and enabling EFI services. [ 0.000893] smp: Bringing up secondary CPUs ... [ 0.001032] Detected PIPT I-cache on CPU1 [ 0.001040] GICv3: CPU1: found redistributor 1 region 0:0x0000000002520000 [ 0.001084] CPU1: Booted secondary processor 0x0000000001 [0x410f0000] [ 0.001164] smp: Brought up 1 node, 2 CPUs [ 0.001169] SMP: Total of 2 processors activated. [ 0.001170] CPU features: detected: ARMv8.4 Translation Table Level [ 0.001171] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.001172] CPU features: detected: Common not Private translations [ 0.001173] CPU features: detected: CRC32 instructions [ 0.001174] CPU features: detected: Data cache clean to Point of Deep Persistence [ 0.001175] CPU features: detected: Data cache clean to Point of Persistence [ 0.001175] CPU features: detected: E0PD [ 0.001176] CPU features: detected: Generic authentication (IMP DEF algorithm) [ 0.001177] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.001178] CPU features: detected: LSE atomic instructions [ 0.001179] CPU features: detected: Privileged Access Never [ 0.001179] CPU features: detected: RAS Extension Support [ 0.001180] CPU features: detected: Speculation barrier (SB) [ 0.001181] CPU features: detected: TLB range maintenance instructions [ 0.001182] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.060463] CPU: All CPU(s) started at EL1 [ 0.061542] devtmpfs: initialized [ 0.061992] Registered cp15_barrier emulation handler [ 0.061994] setend instruction emulation is not supported on this system [ 0.061996] KASLR disabled due to lack of seed [ 0.062021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.062034] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.062111] pinctrl core: initialized pinctrl subsystem [ 0.062221] SMBIOS 3.0.0 present. [ 0.062224] DMI: Parallels International GmbH. Parallels ARM Virtual Machine/Parallels ARM Virtual Platform, BIOS 18.1.1 (53328) Fri, 02 Dec 202 [ 0.062342] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.066687] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.066756] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.066942] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.066949] audit: initializing netlink subsys (disabled) [ 0.067035] audit: type=2000 audit(0.064:1): state=initialized audit_enabled=0 res=1 [ 0.067151] thermal_sys: Registered thermal governor 'fair_share' [ 0.067152] thermal_sys: Registered thermal governor 'bang_bang' [ 0.067153] thermal_sys: Registered thermal governor 'step_wise' [ 0.067153] thermal_sys: Registered thermal governor 'user_space' [ 0.067154] thermal_sys: Registered thermal governor 'power_allocator' [ 0.067162] cpuidle: using governor ladder [ 0.067164] cpuidle: using governor menu [ 0.067179] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.067207] ASID allocator initialised with 256 entries [ 0.067339] Serial: AMBA PL011 UART driver [ 0.068201] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.068204] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.068205] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.068206] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.071353] fbcon: Taking over console [ 0.071356] ACPI: Interpreter disabled. [ 0.071432] iommu: Default domain type: Translated [ 0.071434] iommu: DMA domain TLB invalidation policy: strict mode [ 0.071525] SCSI subsystem initialized [ 0.071587] libata version 3.00 loaded. [ 0.071641] vgaarb: loaded [ 0.071666] usbcore: registered new interface driver usbfs [ 0.071669] usbcore: registered new interface driver hub [ 0.071672] usbcore: registered new device driver usb [ 0.071685] pps_core: LinuxPPS API ver. 1 registered [ 0.071686] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.071688] PTP clock support registered [ 0.071751] EDAC MC: Ver: 3.0.0 [ 0.071825] Registered efivars operations [ 0.071994] NetLabel: Initializing [ 0.071995] NetLabel: domain hash size = 128 [ 0.071996] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.072003] NetLabel: unlabeled traffic allowed by default [ 0.072139] clocksource: Switched to clocksource arch_sys_counter [ 0.078523] VFS: Disk quotas dquot_6.6.0 [ 0.078533] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.078619] AppArmor: AppArmor Filesystem Enabled [ 0.078627] pnp: PnP ACPI: disabled [ 0.079140] NET: Registered PF_INET protocol family [ 0.079430] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.080410] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.080540] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.080814] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.080853] TCP: Hash tables configured (established 65536 bind 65536) [ 0.080977] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.081018] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.081055] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.081075] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.081079] NET: Registered PF_XDP protocol family [ 0.081081] PCI: CLS 0 bytes, default 64 [ 0.081144] Trying to unpack rootfs image as initramfs... [ 0.081168] kvm [1]: HYP mode not available [ 0.081241] Initialise system trusted keyrings [ 0.081248] Key type blacklist registered [ 0.081326] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 0.081818] zbud: loaded [ 0.081946] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.082074] fuse: init (API version 7.34) [ 0.082238] integrity: Platform Keyring initialized [ 0.091731] Key type asymmetric registered [ 0.091733] Asymmetric key parser 'x509' registered [ 0.091757] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) [ 0.091946] io scheduler mq-deadline registered [ 0.092457] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.092552] pci-host-generic 2300000.pci: host bridge /pci@2300000 ranges: [ 0.092559] pci-host-generic 2300000.pci: IO 0x0002400000..0x00024fffff -> 0x0002400000 [ 0.092562] pci-host-generic 2300000.pci: MEM 0x0010000000..0x001fffffff -> 0x0010000000 [ 0.092583] pci-host-generic 2300000.pci: ECAM at [mem 0x02300000-0x023fffff] for [bus 00] [ 0.092605] pci-host-generic 2300000.pci: PCI host bridge to bus 0000:00 [ 0.092607] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x2400000-0x24fffff]) [ 0.092609] pci_bus 0000:00: root bus resource [mem 0x10000000-0x1fffffff] [ 0.092633] pci 0000:00:01.0: [8086:293e] type 00 class 0x040300 [ 0.092646] pci 0000:00:01.0: reg 0x10: [mem 0x14004000-0x14007fff] [ 0.092750] pci 0000:00:02.0: [8086:265c] type 00 class 0x0c0320 [ 0.092786] pci 0000:00:02.0: reg 0x10: [mem 0x1400d000-0x1400d3ff] [ 0.092896] pci 0000:00:03.0: [1033:0194] type 00 class 0x0c0330 [ 0.092908] pci 0000:00:03.0: reg 0x10: [mem 0x1400c000-0x1400cfff] [ 0.092985] pci 0000:00:05.0: [1af4:1000] type 00 class 0x020000 [ 0.093006] pci 0000:00:05.0: reg 0x10: [mem 0x1400b000-0x1400bfff] [ 0.093019] pci 0000:00:05.0: reg 0x14: [mem 0x1400a000-0x1400afff] [ 0.093158] pci 0000:00:09.0: [1ab8:4000] type 00 class 0xff0000 [ 0.093170] pci 0000:00:09.0: reg 0x10: [mem 0x14009000-0x14009fff] [ 0.093248] pci 0000:00:0a.0: [1af4:1050] type 00 class 0x030000 [ 0.093319] pci 0000:00:0a.0: reg 0x10: [mem 0x10000000-0x13ffffff pref] [ 0.093338] pci 0000:00:0a.0: reg 0x14: [mem 0x14008000-0x14008fff] [ 0.093386] pci 0000:00:0a.0: reg 0x20: [mem 0x14000000-0x14003fff] [ 0.093419] pci 0000:00:0a.0: BAR 0: assigned to efifb [ 0.093476] pci 0000:00:0a.0: vgaarb: setting as boot VGA device [ 0.093478] pci 0000:00:0a.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.093517] pci 0000:00:0a.0: BAR 0: assigned [mem 0x10000000-0x13ffffff pref] [ 0.093530] pci 0000:00:01.0: BAR 0: assigned [mem 0x14000000-0x14003fff] [ 0.093533] pci 0000:00:0a.0: BAR 4: assigned [mem 0x14004000-0x14007fff] [ 0.093544] pci 0000:00:03.0: BAR 0: assigned [mem 0x14008000-0x14008fff] [ 0.093547] pci 0000:00:05.0: BAR 0: assigned [mem 0x14009000-0x14009fff] [ 0.093553] pci 0000:00:05.0: BAR 1: assigned [mem 0x1400a000-0x1400afff] [ 0.093560] pci 0000:00:09.0: BAR 0: assigned [mem 0x1400b000-0x1400bfff] [ 0.093563] pci 0000:00:0a.0: BAR 1: assigned [mem 0x1400c000-0x1400cfff] [ 0.093574] pci 0000:00:02.0: BAR 0: assigned [mem 0x1400d000-0x1400d3ff] [ 0.093602] pci 0000:00:03.0: enabling device (0010 -> 0012) [ 0.094316] virtio-pci 0000:00:05.0: virtio_pci: leaving for legacy driver [ 0.094701] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.095283] msm_serial: driver initialized [ 0.095383] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.096224] loop: module loaded [ 0.096273] SPI driver altr_a10sr has no spi_device_id for altr,a10sr [ 0.096390] tun: Universal TUN/TAP device driver, 1.6 [ 0.096444] PPP generic driver version 2.4.2 [ 0.096472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.096480] ehci-pci: EHCI PCI platform driver [ 0.096507] ehci-pci 0000:00:02.0: EHCI Host Controller [ 0.096511] ehci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 0.096575] ehci-pci 0000:00:02.0: Enabling legacy PCI PM [ 0.096598] ehci-pci 0000:00:02.0: irq 17, io mem 0x1400d000 [ 0.112974] ehci-pci 0000:00:02.0: USB 2.0 started, EHCI 1.00 [ 0.113039] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 0.113042] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.113043] usb usb1: Product: EHCI Host Controller [ 0.113044] usb usb1: Manufacturer: Linux 5.15.0-41-generic ehci_hcd [ 0.113045] usb usb1: SerialNumber: 0000:00:02.0 [ 0.113111] hub 1-0:1.0: USB hub found [ 0.113114] hub 1-0:1.0: 15 ports detected [ 0.113257] ehci-orion: EHCI orion driver [ 0.113305] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.113307] ohci-pci: OHCI PCI platform driver [ 0.113311] uhci_hcd: USB Universal Host Controller Interface driver [ 0.113357] mousedev: PS/2 mouse device common for all mice [ 0.113462] rtc-efi rtc-efi.0: registered as rtc0 [ 0.113469] rtc-efi rtc-efi.0: setting system clock to 2023-01-29T18:52:52 UTC (1675018372) [ 0.113498] i2c_dev: i2c /dev entries driver [ 0.113587] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.113609] device-mapper: uevent: version 1.0.3 [ 0.113635] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 0.113732] ledtrig-cpu: registered to indicate activity on CPUs [ 0.113870] drop_monitor: Initializing network drop monitor service [ 0.113952] NET: Registered PF_INET6 protocol family [ 0.347818] Freeing initrd memory: 63692K [ 0.353528] Segment Routing with IPv6 [ 0.353539] In-situ OAM (IOAM) with IPv6 [ 0.353564] NET: Registered PF_PACKET protocol family [ 0.353610] Key type dns_resolver registered [ 0.353716] registered taskstats version 1 [ 0.353756] Loading compiled-in X.509 certificates [ 0.354187] Loaded X.509 cert 'Build time autogenerated kernel key: 36ae7a811d1c8811658ff9b094e2119b6d894072' [ 0.354526] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.354878] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.354879] blacklist: Loading compiled-in revocation X.509 certificates [ 0.354888] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 0.355008] zswap: loaded using pool lzo/zbud [ 0.355143] Key type ._fscrypt registered [ 0.355144] Key type .fscrypt registered [ 0.355145] Key type fscrypt-provisioning registered [ 0.357397] Key type encrypted registered [ 0.357400] AppArmor: AppArmor sha1 policy hashing enabled [ 0.357465] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 0.357663] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.357668] ima: No TPM chip found, activating TPM-bypass! [ 0.357670] Loading compiled-in module X.509 certificates [ 0.358006] Loaded X.509 cert 'Build time autogenerated kernel key: 36ae7a811d1c8811658ff9b094e2119b6d894072' [ 0.358008] ima: Allocated hash algorithm: sha1 [ 0.358016] ima: No architecture policies found [ 0.358022] evm: Initialising EVM extended attributes: [ 0.358023] evm: security.selinux [ 0.358023] evm: security.SMACK64 [ 0.358024] evm: security.SMACK64EXEC [ 0.358025] evm: security.SMACK64TRANSMUTE [ 0.358025] evm: security.SMACK64MMAP [ 0.358026] evm: security.apparmor [ 0.358026] evm: security.ima [ 0.358027] evm: security.capability [ 0.358028] evm: HMAC attrs: 0x1 [ 0.360126] Freeing unused kernel memory: 9600K [ 0.380774] Checked W+X mappings: passed, no W+X pages found [ 0.380784] Run /init as init process [ 0.380785] with arguments: [ 0.380786] /init [ 0.380786] with environment: [ 0.380786] HOME=/ [ 0.380787] TERM=linux [ 0.380787] BOOT_IMAGE=/boot/vmlinuz-5.15.0-41-generic [ 0.453964] prl_tg: loading out-of-tree module taints kernel. [ 0.453971] prl_tg: module license 'Parallels' taints kernel. [ 0.453972] Disabling lock debugging due to kernel taint [ 0.453997] prl_tg: module verification failed: signature and/or required key missing - tainting kernel [ 0.454256] Parallels ToolGate driver 1.10.2 loaded [ 0.454300] prl_tg 0000:00:09.0: enabling device (0010 -> 0012) [ 0.454390] Detected Parallels ToolGate device, IRQ 19 [ 0.458675] xhci_hcd 0000:00:03.0: xHCI Host Controller [ 0.458682] xhci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.458888] xhci_hcd 0000:00:03.0: hcc params 0x01c15001 hci version 0x110 quirks 0x0000000000000014 [ 0.459045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 0.459048] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.459049] usb usb2: Product: xHCI Host Controller [ 0.459050] usb usb2: Manufacturer: Linux 5.15.0-41-generic xhci-hcd [ 0.459051] usb usb2: SerialNumber: 0000:00:03.0 [ 0.459116] hub 2-0:1.0: USB hub found [ 0.459122] hub 2-0:1.0: 2 ports detected [ 0.459232] xhci_hcd 0000:00:03.0: xHCI Host Controller [ 0.459237] xhci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 3 [ 0.459240] xhci_hcd 0000:00:03.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.459274] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.459284] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 0.459285] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.459287] usb usb3: Product: xHCI Host Controller [ 0.459288] usb usb3: Manufacturer: Linux 5.15.0-41-generic xhci-hcd [ 0.459289] usb usb3: SerialNumber: 0000:00:03.0 [ 0.459337] hub 3-0:1.0: USB hub found [ 0.459351] hub 3-0:1.0: 12 ports detected [ 0.461377] ahci 2140000.ahci: supply ahci not found, using dummy regulator [ 0.461393] ahci 2140000.ahci: supply phy not found, using dummy regulator [ 0.461402] ahci 2140000.ahci: supply target not found, using dummy regulator [ 0.461428] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 0.461435] ahci 2140000.ahci: SSS flag set, parallel bus scan disabled [ 0.461508] ahci 2140000.ahci: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl platform mode [ 0.461510] ahci 2140000.ahci: flags: 64bit ncq stag pm led only slum part [ 0.462327] scsi host0: ahci [ 0.462505] scsi host1: ahci [ 0.462659] scsi host2: ahci [ 0.462835] scsi host3: ahci [ 0.462978] scsi host4: ahci [ 0.463125] scsi host5: ahci [ 0.463147] ata1: SATA max UDMA/133 mmio [mem 0x02140000-0x02141fff] port 0x100 irq 13 [ 0.463150] ata2: SATA max UDMA/133 mmio [mem 0x02140000-0x02141fff] port 0x180 irq 13 [ 0.463152] ata3: SATA max UDMA/133 mmio [mem 0x02140000-0x02141fff] port 0x200 irq 13 [ 0.463154] ata4: SATA max UDMA/133 mmio [mem 0x02140000-0x02141fff] port 0x280 irq 13 [ 0.463156] ata5: SATA max UDMA/133 mmio [mem 0x02140000-0x02141fff] port 0x300 irq 13 [ 0.463158] ata6: SATA max UDMA/133 mmio [mem 0x02140000-0x02141fff] port 0x380 irq 13 [ 0.480479] virtio_net virtio1 enp0s5: renamed from eth0 [ 0.782341] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.782546] ata1.00: ATA-8: Ubuntu Linux 22.04 Desktop-0 SSD, F.CVTEFM, max UDMA/100 [ 0.782555] ata1.00: 134217728 sectors, multi 0: LBA48 NCQ (depth 32) [ 0.782736] ata1.00: configured for UDMA/100 [ 0.783106] scsi 0:0:0:0: Direct-Access ATA Ubuntu Linux 22. TEFM PQ: 0 ANSI: 5 [ 0.783737] sd 0:0:0:0: [sda] 134217728 512-byte logical blocks: (68.7 GB/64.0 GiB) [ 0.783743] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.783754] sd 0:0:0:0: [sda] Write Protect is off [ 0.783759] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.783772] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.783977] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.796776] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd [ 0.806209] sda: sda1 sda2 [ 0.817008] usb 3-1: LPM exit latency is zeroed, disabling LPM. [ 0.817318] usb 3-1: New USB device found, idVendor=203a, idProduct=fffc, bcdDevice= 1.00 [ 0.817325] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 0.817328] usb 3-1: Product: Virtual Mouse [ 0.817332] usb 3-1: Manufacturer: Parallels [ 0.817334] usb 3-1: SerialNumber: PW3.0 [ 0.824778] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.946676] usb 3-2: new SuperSpeed USB device number 3 using xhci_hcd [ 0.969050] usb 3-2: LPM exit latency is zeroed, disabling LPM. [ 0.969617] usb 3-2: New USB device found, idVendor=203a, idProduct=fffb, bcdDevice= 1.10 [ 0.969623] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 0.969626] usb 3-2: Product: Virtual Keyboard [ 0.969628] usb 3-2: Manufacturer: Parallels [ 0.969630] usb 3-2: SerialNumber: KBD1.1 [ 1.097266] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.097487] ata2.00: ATAPI: Virtual DVD-ROM [1], FWR1, max UDMA/25 [ 1.097546] usb 3-4: new SuperSpeed USB device number 4 using xhci_hcd [ 1.097662] ata2.00: configured for UDMA/25 [ 1.097974] scsi 1:0:0:0: CD-ROM Virtual DVD-ROM R103 PQ: 0 ANSI: 5 [ 1.131142] usb 3-4: LPM exit latency is zeroed, disabling LPM. [ 1.131486] usb 3-4: New USB device found, idVendor=203a, idProduct=fff9, bcdDevice= 1.00 [ 1.131493] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.131496] usb 3-4: Product: FaceTime HD Camera [ 1.131499] usb 3-4: Manufacturer: Parallels [ 1.131502] usb 3-4: SerialNumber: 47B4B64B-7067-4B9C-AD2B-AE273A71F4B5 [ 1.169364] sr 1:0:0:0: [sr0] scsi3-mmc drive: 44x/44x cd/rw xa/form2 cdda tray [ 1.169388] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.213496] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.213609] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.260631] usb 3-6: new SuperSpeed USB device number 5 using xhci_hcd [ 1.280536] usb 3-6: LPM exit latency is zeroed, disabling LPM. [ 1.280811] usb 3-6: New USB device found, idVendor=203a, idProduct=fff9, bcdDevice= 1.00 [ 1.280818] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.280821] usb 3-6: Product: Logitech BRIO [ 1.280824] usb 3-6: Manufacturer: Parallels [ 1.280827] usb 3-6: SerialNumber: 0x1132000046d085e [ 1.416865] usb 3-12: new SuperSpeed USB device number 6 using xhci_hcd [ 1.437287] usb 3-12: LPM exit latency is zeroed, disabling LPM. [ 1.437823] usb 3-12: New USB device found, idVendor=203a, idProduct=fff9, bcdDevice= 1.00 [ 1.437833] usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.437838] usb 3-12: Product: Opal C1 [ 1.437841] usb 3-12: Manufacturer: Parallels [ 1.437844] usb 3-12: SerialNumber: D208C745-F0A3-4454-B314-52B0E0F76560 [ 1.446331] hid: raw HID events driver (C) Jiri Kosina [ 1.454065] usbcore: registered new interface driver usbhid [ 1.454072] usbhid: USB HID core driver [ 1.526991] ata3: SATA link down (SStatus 0 SControl 300) [ 1.845456] ata4: SATA link down (SStatus 0 SControl 300) [ 2.159049] ata5: SATA link down (SStatus 0 SControl 300) [ 2.472391] ata6: SATA link down (SStatus 0 SControl 300) [ 2.490303] input: Parallels Virtual Mouse as /devices/platform/2300000.pci/pci0000:00/0000:00:03.0/usb3/3-1/3-1:1.0/0003:203A:FFFC.0001/input/input1 [ 2.490461] hid-generic 0003:203A:FFFC.0001: input,hidraw0: USB HID v1.10 Mouse [Parallels Virtual Mouse] on usb-0000:00:03.0-1/input0 [ 2.490746] input: Parallels Virtual Mouse as /devices/platform/2300000.pci/pci0000:00/0000:00:03.0/usb3/3-1/3-1:1.1/0003:203A:FFFC.0002/input/input2 [ 2.490807] hid-generic 0003:203A:FFFC.0002: input,hidraw1: USB HID v1.10 Mouse [Parallels Virtual Mouse] on usb-0000:00:03.0-1/input1 [ 2.490936] input: Parallels Virtual Keyboard as /devices/platform/2300000.pci/pci0000:00/0000:00:03.0/usb3/3-2/3-2:1.0/0003:203A:FFFB.0003/input/input3 [ 2.548653] hid-generic 0003:203A:FFFB.0003: input,hidraw2: USB HID v10.01 Keyboard [Parallels Virtual Keyboard] on usb-0000:00:03.0-2/input0 [ 2.548824] input: Parallels Virtual Keyboard as /devices/platform/2300000.pci/pci0000:00/0000:00:03.0/usb3/3-2/3-2:1.1/0003:203A:FFFB.0004/input/input4 [ 2.608726] hid-generic 0003:203A:FFFB.0004: input,hidraw3: USB HID v10.01 Keyboard [Parallels Virtual Keyboard] on usb-0000:00:03.0-2/input1 [ 2.674536] random: fast init done [ 2.908142] raid6: neonx8 gen() 29155 MB/s [ 2.976147] raid6: neonx8 xor() 26557 MB/s [ 3.044142] raid6: neonx4 gen() 36105 MB/s [ 3.112142] raid6: neonx4 xor() 29201 MB/s [ 3.180144] raid6: neonx2 gen() 37156 MB/s [ 3.248142] raid6: neonx2 xor() 29488 MB/s [ 3.316145] raid6: neonx1 gen() 33984 MB/s [ 3.384144] raid6: neonx1 xor() 22686 MB/s [ 3.452142] raid6: int64x8 gen() 14560 MB/s [ 3.520143] raid6: int64x8 xor() 7680 MB/s [ 3.588143] raid6: int64x4 gen() 13037 MB/s [ 3.656142] raid6: int64x4 xor() 6981 MB/s [ 3.724143] raid6: int64x2 gen() 11685 MB/s [ 3.792142] raid6: int64x2 xor() 6299 MB/s [ 3.860143] raid6: int64x1 gen() 10329 MB/s [ 3.928141] raid6: int64x1 xor() 5313 MB/s [ 3.928144] raid6: using algorithm neonx2 gen() 37156 MB/s [ 3.928145] raid6: .... xor() 29488 MB/s, rmw enabled [ 3.928147] raid6: using neon recovery algorithm [ 3.929550] xor: measuring software checksum speed [ 3.929824] 8regs : 36629 MB/sec [ 3.930156] 32regs : 29822 MB/sec [ 3.930331] arm64_neon : 56700 MB/sec [ 3.930331] xor: using function: arm64_neon (56700 MB/sec) [ 3.930847] async_tx: api initialized (async) [ 3.974530] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes [ 4.087070] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 4.138133] systemd[1]: Inserted module 'autofs4' [ 4.146850] systemd[1]: systemd 249.11-0ubuntu3.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.146884] systemd[1]: Detected virtualization parallels. [ 4.146887] systemd[1]: Detected architecture arm64. [ 4.147439] systemd[1]: Hostname set to <ubuntu-linux-22-04-desktop>. [ 4.219853] systemd[1]: /etc/systemd/system/prltoolsd.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/prltoolsd.pid → /run/prltoolsd.pid; please update the unit file accordingly. [ 4.242055] systemd[1]: Queued start job for default target Graphical Interface. [ 4.261455] systemd[1]: Created slice Slice /system/modprobe. [ 4.261742] systemd[1]: Created slice Slice /system/postgresql. [ 4.261925] systemd[1]: Created slice Slice /system/systemd-fsck. [ 4.262033] systemd[1]: Created slice User and Session Slice. [ 4.262082] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.262209] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.262261] systemd[1]: Reached target Remote File Systems. [ 4.262278] systemd[1]: Reached target Slice Units. [ 4.262306] systemd[1]: Reached target Local Verity Protected Volumes. [ 4.262404] systemd[1]: Listening on Syslog Socket. [ 4.262455] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.262503] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 4.262606] systemd[1]: Listening on Journal Audit Socket. [ 4.262650] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.262708] systemd[1]: Listening on Journal Socket. [ 4.262788] systemd[1]: Listening on Network Service Netlink Socket. [ 4.262856] systemd[1]: Listening on udev Control Socket. [ 4.262904] systemd[1]: Listening on udev Kernel Socket. [ 4.263254] systemd[1]: Mounting Huge Pages File System... [ 4.263603] systemd[1]: Mounting POSIX Message Queue File System... [ 4.263954] systemd[1]: Mounting Kernel Debug File System... [ 4.264327] systemd[1]: Mounting Kernel Trace File System... [ 4.265062] systemd[1]: Starting Journal Service... [ 4.265473] systemd[1]: Starting Set the console keyboard layout... [ 4.265866] systemd[1]: Starting Create List of Static Device Nodes... [ 4.266307] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 4.266697] systemd[1]: Starting Load Kernel Module configfs... [ 4.267101] systemd[1]: Starting Load Kernel Module drm... [ 4.267517] systemd[1]: Starting Load Kernel Module efi_pstore... [ 4.267957] systemd[1]: Starting Load Kernel Module fuse... [ 4.272132] systemd[1]: Starting Load Kernel Module mtdpstore... [ 4.272764] systemd[1]: Starting Load Kernel Module pstore_blk... [ 4.273170] systemd[1]: Starting Load Kernel Module pstore_zone... [ 4.273578] systemd[1]: Starting Load Kernel Module ramoops... [ 4.273622] systemd[1]: Condition check resulted in OpenVSwitch configuration for cleanup being skipped. [ 4.273740] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 4.274613] systemd[1]: Starting Load Kernel Modules... [ 4.275019] systemd[1]: Starting Remount Root and Kernel File Systems... [ 4.275440] systemd[1]: Starting Coldplug All udev Devices... [ 4.276455] systemd[1]: Mounted Huge Pages File System. [ 4.276513] systemd[1]: Mounted POSIX Message Queue File System. [ 4.276554] systemd[1]: Mounted Kernel Debug File System. [ 4.276600] systemd[1]: Mounted Kernel Trace File System. [ 4.276772] systemd[1]: Finished Create List of Static Device Nodes. [ 4.279737] systemd[1]: modprobe@chromeos_pstore.service: Deactivated successfully. [ 4.279829] systemd[1]: Finished Load Kernel Module chromeos_pstore. [ 4.288559] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 4.288728] systemd[1]: Finished Load Kernel Module configfs. [ 4.295353] IPMI message handler: version 39.2 [ 4.295563] EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none. [ 4.296134] ipmi device interface [ 4.297847] pstore: Using crash dump compression: deflate [ 4.297852] pstore: Registered efi as persistent store backend [ 4.299606] mtd device must be supplied (device name is empty) [ 4.312248] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 4.312410] systemd[1]: Finished Load Kernel Module fuse. [ 4.313106] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 4.313193] systemd[1]: Finished Load Kernel Module efi_pstore. [ 4.313288] systemd[1]: modprobe@pstore_blk.service: Deactivated successfully. [ 4.313364] systemd[1]: Finished Load Kernel Module pstore_blk. [ 4.313452] systemd[1]: modprobe@pstore_zone.service: Deactivated successfully. [ 4.313526] systemd[1]: Finished Load Kernel Module pstore_zone. [ 4.313613] systemd[1]: modprobe@ramoops.service: Deactivated successfully. [ 4.313686] systemd[1]: Finished Load Kernel Module ramoops. [ 4.313819] systemd[1]: Finished Load Kernel Modules. [ 4.313946] systemd[1]: Finished Remount Root and Kernel File Systems. [ 4.314589] systemd[1]: Activating swap /swap.img... [ 4.314912] systemd[1]: Mounting FUSE Control File System... [ 4.315204] systemd[1]: Mounting Kernel Configuration File System... [ 4.315535] systemd[1]: Starting Load/Save Random Seed... [ 4.315858] systemd[1]: Starting Apply Kernel Variables... [ 4.329822] Adding 2097148k swap on /swap.img. Priority:-2 extents:3 across:2252796k SSFS [ 4.332680] systemd[1]: Starting Create System Users... [ 4.333227] systemd[1]: Activated swap /swap.img. [ 4.333529] systemd[1]: Finished Set the console keyboard layout. [ 4.333638] systemd[1]: Mounted FUSE Control File System. [ 4.333684] systemd[1]: Mounted Kernel Configuration File System. [ 4.333717] systemd[1]: Reached target Swaps. [ 4.335132] systemd[1]: Finished Load/Save Random Seed. [ 4.335184] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 4.335482] systemd[1]: Finished Coldplug All udev Devices. [ 4.336513] systemd[1]: modprobe@mtdpstore.service: Deactivated successfully. [ 4.336608] systemd[1]: Finished Load Kernel Module mtdpstore. [ 4.336664] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 4.343045] systemd[1]: Finished Create System Users. [ 4.343116] systemd[1]: Started Journal Service. [ 4.350570] systemd-journald[280]: Received client request to flush runtime journal. [ 4.359979] loop0: detected capacity change from 0 to 8 [ 4.361332] loop1: detected capacity change from 0 to 785984 [ 4.363375] loop2: detected capacity change from 0 to 677120 [ 4.365621] loop3: detected capacity change from 0 to 118432 [ 4.368067] loop4: detected capacity change from 0 to 187776 [ 4.369145] loop5: detected capacity change from 0 to 120984 [ 4.369351] loop6: detected capacity change from 0 to 439664 [ 4.372607] loop7: detected capacity change from 0 to 307064 [ 4.373527] loop8: detected capacity change from 0 to 88424 [ 4.596182] cryptd: max_cpu_qlen set to 1000 [ 4.681075] [drm] pci: virtio-vga detected at 0000:00:0a.0 [ 4.681097] [drm] features: +virgl -edid -resource_blob -host_visible [ 4.682902] [drm] number of scanouts: 16 [ 4.682904] [drm] number of cap sets: 1 [ 4.682990] [drm] cap set 0: id 2, max-version 2, max-size 768 [ 4.683233] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 4.684868] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 4.684900] Console: switching to colour frame buffer device 128x48 [ 4.685610] mc: Linux media interface: v0.10 [ 4.685638] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 4.707924] videodev: Linux video capture interface: v2.00 [ 4.759692] usb 3-4: Found UVC 1.00 device FaceTime HD Camera (203a:fff9) [ 4.759999] usb 3-6: Found UVC 1.00 device Logitech BRIO (203a:fff9) [ 4.760270] usb 3-12: Found UVC 1.00 device Opal C1 (203a:fff9) [ 4.760451] usbcore: registered new interface driver uvcvideo [ 4.827213] snd_hda_intel 0000:00:01.0: enabling device (0000 -> 0002) [ 4.827240] snd_hda_intel 0000:00:01.0: Force to snoop mode by module option [ 4.843630] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=5 (0xa/0xc/0xb/0xf/0xd) type:speaker [ 4.843634] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.843635] snd_hda_codec_generic hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.843636] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0 [ 4.843636] snd_hda_codec_generic hdaudioC0D0: inputs: [ 4.843637] snd_hda_codec_generic hdaudioC0D0: Mic=0xe [ 4.846462] input: HDA Intel Mic as /devices/platform/2300000.pci/pci0000:00/0000:00:01.0/sound/card0/input5 [ 4.846503] input: HDA Intel Speaker as /devices/platform/2300000.pci/pci0000:00/0000:00:01.0/sound/card0/input6 [ 4.846535] input: HDA Intel Speaker as /devices/platform/2300000.pci/pci0000:00/0000:00:01.0/sound/card0/input7 [ 4.847080] input: HDA Intel Speaker as /devices/platform/2300000.pci/pci0000:00/0000:00:01.0/sound/card0/input8 [ 4.847241] input: HDA Intel Speaker as /devices/platform/2300000.pci/pci0000:00/0000:00:01.0/sound/card0/input9 [ 4.847274] input: HDA Intel Speaker as /devices/platform/2300000.pci/pci0000:00/0000:00:01.0/sound/card0/input10 [ 4.870181] audit: type=1400 audit(1675018377.252:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=558 comm="apparmor_parser" [ 4.871791] audit: type=1400 audit(1675018377.252:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=559 comm="apparmor_parser" [ 4.871792] audit: type=1400 audit(1675018377.252:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=559 comm="apparmor_parser" [ 4.877779] audit: type=1400 audit(1675018377.260:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=561 comm="apparmor_parser" [ 4.877782] audit: type=1400 audit(1675018377.260:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=561 comm="apparmor_parser" [ 4.877784] audit: type=1400 audit(1675018377.260:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=561 comm="apparmor_parser" [ 4.877785] audit: type=1400 audit(1675018377.260:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=561 comm="apparmor_parser" [ 4.884580] audit: type=1400 audit(1675018377.264:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=565 comm="apparmor_parser" [ 4.884583] audit: type=1400 audit(1675018377.264:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=565 comm="apparmor_parser" [ 5.082194] mtd device must be supplied (device name is empty) [ 5.134969] kauditd_printk_skb: 18 callbacks suppressed [ 5.134972] audit: type=1400 audit(1675018377.516:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/sssd" pid=669 comm="apparmor_parser" [ 5.167700] audit: type=1400 audit(1675018377.548:30): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/17954/usr/lib/snapd/snap-confine" pid=687 comm="apparmor_parser" [ 5.167703] audit: type=1400 audit(1675018377.548:31): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/17954/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=687 comm="apparmor_parser" [ 5.169855] audit: type=1400 audit(1675018377.552:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.firefox" pid=688 comm="apparmor_parser" [ 5.185097] audit: type=1400 audit(1675018377.568:33): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.geckodriver" pid=690 comm="apparmor_parser" [ 5.185145] audit: type=1400 audit(1675018377.568:34): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.firefox" pid=689 comm="apparmor_parser" [ 5.190209] audit: type=1400 audit(1675018377.572:35): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.connect-plug-host-hunspell" pid=692 comm="apparmor_parser" [ 5.191750] audit: type=1400 audit(1675018377.572:36): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.configure" pid=691 comm="apparmor_parser" [ 5.195367] audit: type=1400 audit(1675018377.576:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.disconnect-plug-host-hunspell" pid=693 comm="apparmor_parser" [ 5.196426] audit: type=1400 audit(1675018377.580:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.post-refresh" pid=694 comm="apparmor_parser" [ 5.234204] random: avahi-daemon: uninitialized urandom read (4 bytes read) [ 5.239108] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 5.272586] random: wpa_supplicant: uninitialized urandom read (4096 bytes read) [ 5.669256] Parallels Linux shared folders filesystem driver 2.1.2 loaded [ 6.412163] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 6.488847] loop9: detected capacity change from 0 to 8 [ 6.568376] usb 1-1: New USB device found, idVendor=203a, idProduct=fffa, bcdDevice= 1.00 [ 6.568380] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.568381] usb 1-1: Product: Virtual Printer (Print to PDF (Mac Desktop)) [ 6.568382] usb 1-1: Manufacturer: Parallels [ 6.568382] usb 1-1: SerialNumber: TAG11d87aca0 [ 6.583538] usblp 1-1:1.0: usblp0: USB Unidirectional printer dev 2 if 0 alt 0 proto 1 vid 0x203A pid 0xFFFA [ 6.583563] usbcore: registered new interface driver usblp [ 6.944728] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 6.948860] Bridge firewalling registered [ 7.131404] Initializing XFRM netlink socket [ 7.350761] random: crng init done [ 7.350765] random: 7 urandom warning(s) missed due to ratelimiting [ 7.998792] rfkill: input handler disabled [ 10.212185] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 10.368456] usb 1-2: New USB device found, idVendor=203a, idProduct=fffa, bcdDevice= 1.00 [ 10.368462] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.368463] usb 1-2: Product: Virtual Printer (Brother HL-L2370DW series) [ 10.368464] usb 1-2: Manufacturer: Parallels [ 10.368464] usb 1-2: SerialNumber: TAG12e6fe16a [ 10.372165] usblp 1-2:1.0: usblp1: USB Unidirectional printer dev 3 if 0 alt 0 proto 1 vid 0x203A pid 0xFFFA [ 11.699956] usblp1: removed [ 11.705431] usblp 1-2:1.0: usblp1: USB Unidirectional printer dev 3 if 0 alt 0 proto 1 vid 0x203A pid 0xFFFA [ 11.705540] usblp0: removed [ 11.711212] usblp 1-1:1.0: usblp0: USB Unidirectional printer dev 2 if 0 alt 0 proto 1 vid 0x203A pid 0xFFFA [ 14.703793] rfkill: input handler enabled [ 15.823815] rfkill: input handler disabled [ 18.226754] usblp1: removed [ 18.232874] usblp 1-2:1.0: usblp1: USB Unidirectional printer dev 3 if 0 alt 0 proto 1 vid 0x203A pid 0xFFFA [ 18.234325] usblp0: removed [ 18.240989] usblp 1-1:1.0: usblp0: USB Unidirectional printer dev 2 if 0 alt 0 proto 1 vid 0x203A pid 0xFFFA