Ubuntu
flashplugin-nonfree package

Flash full screen does not work in a dual monitor setting

Bug #379650 reported by SanDiego
36
This bug affects 6 people
Affects Status Importance Assigned to Milestone
flashplugin-nonfree (Ubuntu)
Confirmed
Undecided
Unassigned

Bug Description

I connected an external monitor to my laptop and whenever I try to maximize flash videos to full screen it is always displayed at the first (laptop) monitor instead of the external monitor. Also most of the times video is not full screen either.

These are the system information:

$ lsb_release -rd
Description: Ubuntu 9.04
Release: 9.04

$ lspci -nnvv
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
 Subsystem: Lenovo Device [17aa:2015]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information <?>
 Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 I/O behind bridge: 00002000-00002fff
 Memory behind bridge: ee100000-ee1fffff
 Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [88] Subsystem: Lenovo Device [17aa:2014]
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 4171
 Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
   ExtTag- RBE- FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <4us
   ClockPM- Suprise- LLActRep- BwNot-
  LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
   Slot # 1, PowerLimit 75.000000; Interlock- NoCompl-
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Off, PwrInd On, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet+ LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [140] Root Complex Link <?>
 Kernel driver in use: pcieport-driver
 Kernel modules: shpchp

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
 Subsystem: Lenovo Device [17aa:2010]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin B routed to IRQ 17
 Region 0: Memory at ee400000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
  Address: 0000000000000000 Data: 0000
 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
   ExtTag- RBE- FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
   ClockPM- Suprise- LLActRep- BwNot-
  LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [130] Root Complex Link <?>
 Kernel driver in use: HDA Intel
 Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
 I/O behind bridge: 00003000-00003fff
 Memory behind bridge: ee000000-ee0fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
   ExtTag- RBE- FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
   ClockPM- Suprise- LLActRep+ BwNot-
  LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
   Slot # 2, PowerLimit 6.500000; Interlock- NoCompl-
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 4179
 Capabilities: [90] Subsystem: Lenovo Device [17aa:2011]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [180] Root Complex Link <?>
 Kernel driver in use: pcieport-driver
 Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
 I/O behind bridge: 00004000-00005fff
 Memory behind bridge: ec000000-edffffff
 Prefetchable memory behind bridge: 00000000e4000000-00000000e40fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
   ExtTag- RBE- FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
   ClockPM- Suprise- LLActRep+ BwNot-
  LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
   Slot # 3, PowerLimit 6.500000; Interlock- NoCompl-
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState+
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 4181
 Capabilities: [90] Subsystem: Lenovo Device [17aa:2011]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [180] Root Complex Link <?>
 Kernel driver in use: pcieport-driver
 Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0
 I/O behind bridge: 00006000-00007fff
 Memory behind bridge: e8000000-e9ffffff
 Prefetchable memory behind bridge: 00000000e4100000-00000000e41fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
   ExtTag- RBE- FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
   ClockPM- Suprise- LLActRep+ BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
   Slot # 4, PowerLimit 6.500000; Interlock- NoCompl-
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 4189
 Capabilities: [90] Subsystem: Lenovo Device [17aa:2011]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [180] Root Complex Link <?>
 Kernel driver in use: pcieport-driver
 Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=0c, subordinate=13, sec-latency=0
 I/O behind bridge: 00008000-00009fff
 Memory behind bridge: ea000000-ebffffff
 Prefetchable memory behind bridge: 00000000e4200000-00000000e42fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
   ExtTag- RBE- FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
   ClockPM- Suprise- LLActRep+ BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
   Slot # 5, PowerLimit 6.500000; Interlock- NoCompl-
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 4191
 Capabilities: [90] Subsystem: Lenovo Device [17aa:2011]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [180] Root Complex Link <?>
 Kernel driver in use: pcieport-driver
 Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02)
 Subsystem: Lenovo Device [17aa:200a]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 16
 Region 4: I/O ports at 1800 [size=32]
 Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02)
 Subsystem: Lenovo Device [17aa:200a]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 17
 Region 4: I/O ports at 1820 [size=32]
 Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02)
 Subsystem: Lenovo Device [17aa:200a]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 18
 Region 4: I/O ports at 1840 [size=32]
 Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02)
 Subsystem: Lenovo Device [17aa:200a]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin D routed to IRQ 19
 Region 4: I/O ports at 1860 [size=32]
 Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20)
 Subsystem: Lenovo Device [17aa:200b]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin D routed to IRQ 19
 Region 0: Memory at ee404000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
 Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
 I/O behind bridge: 0000a000-0000dfff
 Memory behind bridge: e4300000-e7ffffff
 Prefetchable memory behind bridge: 00000000e0000000-00000000e3ffffff
 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [50] Subsystem: Lenovo Device [17aa:2013]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
 Subsystem: Lenovo Device [17aa:2009]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information <?>
 Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
 Subsystem: Lenovo Device [17aa:200c]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
 Latency: 0
 Interrupt: pin C routed to IRQ 16
 Region 0: I/O ports at 01f0 [size=8]
 Region 1: I/O ports at 03f4 [size=1]
 Region 2: I/O ports at 0170 [size=8]
 Region 3: I/O ports at 0374 [size=1]
 Region 4: I/O ports at 1880 [size=16]
 Kernel driver in use: ata_piix

00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 02) (prog-if 01)
 Subsystem: Lenovo Device [17aa:200d]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 2298
 Region 0: I/O ports at 18c8 [size=8]
 Region 1: I/O ports at 18ac [size=4]
 Region 2: I/O ports at 18c0 [size=8]
 Region 3: I/O ports at 18a8 [size=4]
 Region 4: I/O ports at 18b0 [size=16]
 Region 5: Memory at ee404400 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 4199
 Capabilities: [70] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
 Subsystem: Lenovo Device [17aa:200f]
 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 11
 Region 4: I/O ports at 18e0 [size=32]
 Kernel modules: i2c-i801

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility X1400 [1002:7145]
 Subsystem: Lenovo Device [17aa:2006]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
 Region 1: I/O ports at 2000 [size=256]
 Region 2: Memory at ee100000 (32-bit, non-prefetchable) [size=64K]
 [virtual] Expansion ROM at ee120000 [disabled] [size=128K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Express (v1) Legacy Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
   ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
   ClockPM- Suprise- LLActRep- BwNot-
  LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
  Address: 0000000000000000 Data: 0000

02:00.0 Ethernet controller [0200]: Intel Corporation 82573L Gigabit Ethernet Controller [8086:109a]
 Subsystem: Lenovo Device [17aa:2001]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 2297
 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K]
 Region 2: I/O ports at 3000 [size=32]
 Capabilities: [c8] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=1 PME-
 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
  Address: 00000000fee0300c Data: 41d1
 Capabilities: [e0] Express (v1) Endpoint, MSI 00
  DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 512 bytes
  DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
   ClockPM+ Suprise- LLActRep- BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Capabilities: [100] Advanced Error Reporting <?>
 Capabilities: [140] Device Serial Number 77-70-83-ff-ff-58-15-00
 Kernel driver in use: e1000e
 Kernel modules: e1000e

03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4227] (rev 02)
 Subsystem: Intel Corporation Device [8086:1010]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 2296
 Region 0: Memory at edf00000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: [c8] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
  Address: 00000000fee0300c Data: 41c1
 Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
   ClockPM+ Suprise- LLActRep- BwNot-
  LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Capabilities: [100] Advanced Error Reporting <?>
 Capabilities: [140] Device Serial Number 84-ee-c0-ff-ff-d2-19-00
 Kernel driver in use: iwl3945
 Kernel modules: iwl3945

15:00.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56]
 Subsystem: Lenovo Device [17aa:2012]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 168, Cache Line Size: 128 bytes
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at e4300000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
 Memory window 0: e0000000-e3fff000 (prefetchable)
 Memory window 1: 50000000-53fff000
 I/O window 0: 0000a000-0000a0ff
 I/O window 1: 0000a400-0000a4ff
 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
 16-bit legacy interface ports at 0001
 Kernel driver in use: yenta_cardbus
 Kernel modules: yenta_socket

Revision history for this message
SanDiego (ergut) wrote :
Revision history for this message
SanDiego (ergut) wrote :

This is the log file after reproducing the problem.

Revision history for this message
delance (olivier-delance) wrote :

Do you use NVidia card ?
Do you configure in "TwinView" oe "Separate Screen" .
I will try to reproduce the problem.

Revision history for this message
SanDiego (ergut) wrote :

Sorry for the late response. No I use ATI card. Following is from lspci

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400

Revision history for this message
SanDiego (ergut) wrote :

By the way, I configured it as an extended window setup using the System >> Preferences >> Display program from the menu.

Revision history for this message
cgrushko (carmi-grushko) wrote :

Same with me;
working on a laptop with Intel 945GM with UXA.
In my case the monitors are (logically) vertically stacked.
Also configured the thing with the Display applet.
(Could not attach screenshot - hitting the "Print Screen" key takes me out of fullscreen mode)

Revision history for this message
cgrushko (carmi-grushko) wrote :

Also: this problem does not happen with say VLC in fullscreen mode (default rendering options).

Problem happens with at least Firefox 3.0.11 and Epiphany 2.26.1.

Revision history for this message
Ole Jon Bjørkum (olejonbj) wrote :

Same problem here. I want to view YouTube-videos on my TV. I drag the Firefox-window to the TV, and maximize it, and then click the fullscreen button. Then the video is shown on the monitor, not the TV, and in the wrong resolution aswell. With Opera, the video is actually shown on the TV in fullscreen, but it looks like it thinks that the TV has the same resolution as the monitor (why??), and then it gets completely wrong. It should show the video on the same monitor as the browser window, and in the same resolution as the monitor it's on.

Revision history for this message
Ole Jon Bjørkum (olejonbj) wrote :

By the way, this is working as it should in Windows XP.

Revision history for this message
Andreas Brudin (andreas-brudin) wrote :

I have the same problem, both in Firefox and Opera, using an NVidia-card, and configuring it with TwinView. (2xDVI out)

komputes (komputes)
affects: ubuntu → flashplugin-nonfree (Ubuntu)
Changed in flashplugin-nonfree (Ubuntu):
status: New → Confirmed
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.
Subscribing...

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.