8.10 alternate install gives blank screen
| Affects | Status | Importance | Assigned to | Milestone | |
|---|---|---|---|---|---|
| debian-installer (Ubuntu) |
New
|
Undecided
|
Ubuntu Installer Team | ||
Bug Description
The alternate installer for both Kubuntu and Ubuntu 8.10 will load up to the menu where I can choose between installing (K)Ubuntu, booting from the first hard disk, etc.
When hitting the "install ubuntu" menu item the cd starts spinning and loading, then there is a short message on a bug that is always reported on my system but has never caused any sort of problem "MP-BIOS bug: 8254 timer not connected to IO-APIC" and some other message below it that flicks away too quickly for me to read.
After these two messages the screen goes completely blank, the cd drive stops spinning and nothing happens after.
Pushing keys of my keyboard etc. won't do anything - all fans of my computer are spinning, the cd drive is not spinning at all and my computer remains like that with a blank screen.
To make this clear: The exact same thing happens with both the Kubuntu 8.10 alternate installer AND the Ubuntu 8.10 alternate installer (both 32 bith version).
I have a Toshiba Satellite A70 from back in 2004.
dmesg output:
[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Tue Feb 12 05:41:34 UTC 2008 (Ubuntu 2.6.20-
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d0000 size: 0000000000008000 end: 00000000000d8000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001be70000 end: 000000001bf70000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001bf70000 size: 000000000000b000 end: 000000001bf7b000 type: 3
[ 0.000000] copy_e820_map() start: 000000001bf7b000 size: 0000000000005000 end: 000000001bf80000 type: 4
[ 0.000000] copy_e820_map() start: 000000001bf80000 size: 0000000000080000 end: 000000001c000000 type: 2
[ 0.000000] copy_e820_map() start: 000000002bf80000 size: 0000000000080000 end: 000000002c000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bf70000 (usable)
[ 0.000000] BIOS-e820: 000000001bf70000 - 000000001bf7b000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bf7b000 - 000000001bf80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved)
[ 0.000000] BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6ae0
[ 0.000000] Entering add_active_range(0, 0, 114544) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114544
[ 0.000000] HighMem 114544 -> 114544
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114544
[ 0.000000] On node 0 totalpages: 114544
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 862 pages used for memmap
[ 0.000000] Normal zone: 109586 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6b40
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1bf75ece
[ 0.000000] ACPI: FADT (v001 TOSCPL Chinook 0x06040000 ATI 0x00000003) @ 0x1bf7af32
[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1bf7afa6
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x1bf76316
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1bf76101
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x1bf75f06
[ 0.000000] ACPI: DSDT (v001 TOSCPL SB200 0x06040000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 2c000000:d2c00000)
[ 0.000000] Detected 2800.258 MHz processor.
[ 9.305261] Built 1 zonelists. Total pages: 113650
[ 9.305266] Kernel command line: root=UUID=
[ 9.305429] mapped APIC to ffffd000 (fee00000)
[ 9.305432] mapped IOAPIC to ffffc000 (fec00000)
[ 9.305435] Enabling fast FPU save and restore... done.
[ 9.305438] Enabling unmasked SIMD FPU exception support... done.
[ 9.305455] Initializing CPU#0
[ 9.305555] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 9.306583] Console: colour VGA+ 80x25
[ 9.307078] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 9.307452] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 9.319535] Memory: 443064k/458176k available (1993k kernel code, 14468k reserved, 900k data, 328k init, 0k highmem)
[ 9.319545] virtual kernel memory layout:
[ 9.319546] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 9.319547] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 9.319548] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 9.319549] lowmem : 0xc0000000 - 0xdbf70000 ( 447 MB)
[ 9.319550] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 9.319551] .data : 0xc02f24c9 - 0xc03d36d4 ( 900 kB)
[ 9.319552] .text : 0xc0100000 - 0xc02f24c9 (1993 kB)
[ 9.319555] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 9.397388] Calibrating delay using timer specific routine.. 5603.55 BogoMIPS (lpj=11207106)
[ 9.397432] Security Framework v1.0.0 initialized
[ 9.397440] SELinux: Disabled at boot.
[ 9.397458] Mount-cache hash table entries: 512
[ 9.397614] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[ 9.397627] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 9.397630] CPU: L2 cache: 512K
[ 9.397632] CPU: Hyper-Threading is disabled
[ 9.397634] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00004400 00000000 00000000
[ 9.397646] Compat vDSO mapped to ffffe000.
[ 9.397650] Remapping vsyscall page to ffffe000
[ 9.397663] Checking 'hlt' instruction... OK.
[ 9.413459] SMP alternatives: switching to UP code
[ 9.413680] Freeing SMP alternatives: 11k freed
[ 9.413903] Early unpacking initramfs... done
[ 9.691936] ACPI: Core revision 20060707
[ 9.718635] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 9.724118] CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
[ 9.724160] Total of 1 processors activated (5603.55 BogoMIPS).
[ 9.724227] ENABLING IO-APIC IRQs
[ 9.724403] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 9.764038] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 9.764071] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[ 9.764074] ...trying to set up timer as Virtual Wire IRQ... works.
[ 9.908484] Brought up 1 CPUs
[ 9.908750] Booting paravirtualized kernel on bare hardware
[ 9.908816] Time: 12:30:05 Date: 10/01/108
[ 9.908850] NET: Registered protocol family 16
[ 9.908960] EISA bus registered
[ 9.908966] ACPI: bus type pci registered
[ 9.942714] PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2
[ 9.942716] PCI: Using configuration type 1
[ 9.942718] Setting up standard PCI resources
[ 9.969537] ACPI: Interpreter enabled
[ 9.969542] ACPI: Using IOAPIC for interrupt routing
[ 9.970135] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 9.970142] PCI: Probing PCI hardware (bus 00)
[ 9.971268] Boot video device is 0000:01:05.0
[ 9.971741] PCI: Transparent bridge - 0000:00:14.4
[ 9.971819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 9.974273] ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled.
[ 9.974489] ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled.
[ 9.974696] ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled.
[ 9.974908] ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled.
[ 10.016330] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 10.017244] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 10.017671] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 10.017684] pnp: PnP ACPI init
[ 10.040294] pnp: PnP ACPI: found 11 devices
[ 10.040300] PnPBIOS: Disabled by ACPI PNP
[ 10.040367] PCI: Using ACPI for IRQ routing
[ 10.040370] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 10.045818] NET: Registered protocol family 8
[ 10.045821] NET: Registered protocol family 20
[ 10.046025] pnp: 00:07: ioport range 0x1080-0x1080 has been reserved
[ 10.046028] pnp: 00:07: ioport range 0x220-0x22f has been reserved
[ 10.046030] pnp: 00:07: ioport range 0x40b-0x40b has been reserved
[ 10.046032] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 10.046354] PCI: Bridge: 0000:00:01.0
[ 10.046357] IO window: 9000-9fff
[ 10.046361] MEM window: e8100000-e81fffff
[ 10.046364] PREFETCH window: f0000000-f7ffffff
[ 10.046373] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[ 10.046375] IO window: 0000a400-0000a4ff
[ 10.046380] IO window: 0000a800-0000a8ff
[ 10.046384] PREFETCH window: 30000000-33ffffff
[ 10.046389] MEM window: 34000000-37ffffff
[ 10.046393] PCI: Bridge: 0000:00:14.4
[ 10.046395] IO window: a000-afff
[ 10.046400] MEM window: e8200000-e82fffff
[ 10.046403] PREFETCH window: 30000000-33ffffff
[ 10.046437] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 10.046472] NET: Registered protocol family 2
[ 10.080212] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 10.080313] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 10.080425] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 10.080484] TCP: Hash tables configured (established 16384 bind 8192)
[ 10.080487] TCP reno registered
[ 10.092224] checking if image is initramfs... it is
[ 10.638757] Freeing initrd memory: 6786k freed
[ 10.639323] audit: initializing netlink socket (disabled)
[ 10.639341] audit(122554260
[ 10.639498] VFS: Disk quotas dquot_6.5.1
[ 10.639522] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 10.639586] io scheduler noop registered
[ 10.639589] io scheduler anticipatory registered
[ 10.639591] io scheduler deadline registered
[ 10.639600] io scheduler cfq registered (default)
[ 11.166323] isapnp: Scanning for PnP cards...
[ 11.518761] isapnp: No Plug & Play device found
[ 11.545298] Real Time Clock Driver v1.12ac
[ 11.545449] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 11.545731] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 11.546248] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 11.546257] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 11.546337] mice: PS/2 mouse device common for all mice
[ 11.546951] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 11.547250] input: Macintosh mouse button emulation as /class/input/input0
[ 11.547288] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 11.547292] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 11.547497] PNP: PS/2 Controller [PNP0303:
[ 11.547801] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 11.547846] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 11.547850] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 11.547853] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 11.547856] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 11.547858] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 11.547987] EISA: Probing bus 0 at eisa.0
[ 11.547996] Cannot allocate resource for EISA slot 1
[ 11.548013] Cannot allocate resource for EISA slot 8
[ 11.548014] EISA: Detected 0 cards.
[ 11.578075] TCP cubic registered
[ 11.578084] NET: Registered protocol family 1
[ 11.578112] Using IPI No-Shortcut mode
[ 11.578226] ACPI: (supports S0 S3 S4 S5)
[ 11.578270] Magic number: 0:853:530
[ 11.579021] Freeing unused kernel memory: 328k freed
[ 11.580619] input: AT Translated Set 2 keyboard as /class/input/input1
[ 11.581318] Time: tsc clocksource has been installed.
[ 12.809908] Capability LSM initialized
[ 12.851473] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 12.851480] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 12.851492] ACPI Exception (acpi_processor
[ 13.395127] usbcore: registered new interface driver usbfs
[ 13.395158] usbcore: registered new interface driver hub
[ 13.395182] usbcore: registered new device driver usb
[ 13.396032] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 13.396071] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 13.396085] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 13.396258] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 13.396276] ohci_hcd 0000:00:13.0: irq 18, io mem 0xe8001000
[ 13.428189] SCSI subsystem initialized
[ 13.433545] libata version 2.20 loaded.
[ 13.457997] usb usb1: configuration #1 chosen from 1 choice
[ 13.458029] hub 1-0:1.0: USB hub found
[ 13.458042] hub 1-0:1.0: 3 ports detected
[ 13.499828] ieee1394: Initialized config rom entry `ip1394'
[ 13.518545] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 13.561822] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
[ 13.561844] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 13.561869] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 13.561889] ohci_hcd 0000:00:13.1: irq 18, io mem 0xe8002000
[ 13.621694] usb usb2: configuration #1 chosen from 1 choice
[ 13.621724] hub 2-0:1.0: USB hub found
[ 13.621735] hub 2-0:1.0: 3 ports detected
[ 13.728875] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 13.728889] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 13.728900] ATIIXP: chipset revision 0
[ 13.728902] ATIIXP: not 100% native mode: will probe irqs later
[ 13.728910] ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
[ 13.728922] ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
[ 13.728931] Probing IDE interface ide0...
[ 3.872000] Time: acpi_pm clocksource has been installed.
[ 4.096000] hda: IC25N040ATMR04-0, ATA DISK drive
[ 4.768000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.788000] Probing IDE interface ide1...
[ 5.524000] hdc: TOSHIBA DVD-ROM SD-R2512, ATAPI CD/DVD-ROM drive
[ 6.236000] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.248000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
[ 6.248000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 6.248000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 6.248000] ehci_hcd 0000:00:13.2: irq 18, io mem 0xe8003000
[ 6.248000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.248000] usb usb3: configuration #1 chosen from 1 choice
[ 6.248000] hub 3-0:1.0: USB hub found
[ 6.248000] hub 3-0:1.0: 6 ports detected
[ 6.256000] hda: max request size: 512KiB
[ 6.268000] hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100)
[ 6.268000] hda: cache flushes supported
[ 6.268000] hda: hda1 hda2 hda3
[ 6.336000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 6.336000] Uniform CD-ROM driver Revision: 3.20
[ 6.352000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 6.400000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[e8214000-
[ 6.400000] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 6.400000] 8139cp 0000:02:03.0: Try the "8139too" driver instead.
[ 6.404000] 8139too Fast Ethernet driver 0.9.28
[ 6.404000] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 6.404000] eth0: RealTek RTL8139 at 0xdc924800, 00:02:3f:d4:29:c5, IRQ 18
[ 6.404000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 6.692000] Attempting manual resume
[ 6.692000] swsusp: Resume From Partition 3:2
[ 6.692000] PM: Checking swsusp image.
[ 6.700000] PM: Resume from disk failed.
[ 6.752000] kjournald starting. Commit interval 5 seconds
[ 6.752000] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.672000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f4556
[ 23.020000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 23.080000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 23.228000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.300000] Linux agpgart interface v0.102 (c) Dave Jones
[ 23.512000] agpgart: Detected Ati IGP9100/M chipset
[ 23.516000] agpgart: AGP aperture is 32M @ 0xea000000
[ 23.552000] input: PC Speaker as /class/input/input2
[ 23.584000] input: PS/2 Mouse as /class/input/input3
[ 23.604000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4
[ 24.196000] parport: PnPBIOS parport detected.
[ 24.196000] parport0: PC-style at 0x378, irq 7 [PCSPP,
[ 24.252000] Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff01]
[ 24.252000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 24.252000] Yenta: Routing CardBus interrupts to PCI
[ 24.252000] Yenta TI: socket 0000:02:04.0, mfunc 0x89501212, devctl 0x44
[ 24.336000] sdhci: Secure Digital Host Controller Interface driver
[ 24.336000] sdhci: Copyright(c) Pierre Ossman
[ 24.364000] irda_init()
[ 24.364000] NET: Registered protocol family 23
[ 24.484000] Yenta: ISA IRQ mask 0x0a68, PCI irq 16
[ 24.484000] Socket status: 30000006
[ 24.484000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 24.484000] cs: IO port probe 0xa000-0xafff: clean.
[ 24.484000] pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
[ 24.484000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[ 24.548000] sdhci: SDHCI controller found at 0000:02:04.2 [1524:0550] (rev 0)
[ 24.548000] ACPI: PCI Interrupt 0000:02:04.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 24.548000] mmc0: SDHCI at 0xe8215000 irq 17 DMA
[ 24.824000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 24.832000] atiixp-modem: codec reset timeout
[ 24.844000] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 24.984000] cs: IO port probe 0x100-0x3af: clean.
[ 24.988000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 24.988000] cs: IO port probe 0x820-0x8ff: clean.
[ 24.988000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
[ 24.988000] cs: IO port probe 0xa00-0xaff: clean.
[ 25.544000] fuse init (API version 7.8)
[ 25.584000] lp0: using parport0 (interrupt-driven).
[ 25.848000] rtusb init ====>
[ 25.848000] usbcore: registered new interface driver rt73
[ 25.884000] Adding 1951888k swap on /dev/disk/
[ 26.040000] EXT3 FS on hda1, internal journal
[ 26.356000] kjournald starting. Commit interval 5 seconds
[ 26.356000] EXT3 FS on hda3, internal journal
[ 26.356000] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.240000] Using specific hotkey driver
[ 27.388000] ibm_acpi: ec object not found
[ 27.508000] input: Power Button (FF) as /class/input/input5
[ 27.512000] ACPI: Power Button (FF) [PWRF]
[ 27.552000] input: Lid Switch as /class/input/input6
[ 27.556000] ACPI: Lid Switch [LID]
[ 27.588000] input: Power Button (CM) as /class/input/input7
[ 27.592000] ACPI: Power Button (CM) [PWRB]
[ 27.768000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 27.836000] No dock devices found.
[ 27.868000] ACPI: Battery Slot [BAT1] (battery present)
[ 27.900000] ACPI: AC Adapter [ACAD] (on-line)
[ 27.992000] pcc_acpi: loading...
[ 31.932000] ppdev: user-space parallel port driver
[ 33.076000] apm: BIOS not found.
[ 33.812000] Bluetooth: Core ver 2.11
[ 33.812000] NET: Registered protocol family 31
[ 33.812000] Bluetooth: HCI device and connection manager initialized
[ 33.812000] Bluetooth: HCI socket layer initialized
[ 33.856000] Bluetooth: L2CAP ver 2.8
[ 33.856000] Bluetooth: L2CAP socket layer initialized
[ 34.008000] Bluetooth: RFCOMM socket layer initialized
[ 34.008000] Bluetooth: RFCOMM TTY layer initialized
[ 34.008000] Bluetooth: RFCOMM ver 1.8
[ 36.304000] [drm] Initialized drm 1.1.0 20060810
[ 36.324000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 36.328000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 38.496000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 38.496000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[ 38.496000] agpgart: Putting AGP V3 device at 0000:01:05.0 into 4x mode
[ 38.636000] [drm] Setting GART location based on new memory map
[ 38.636000] [drm] Loading R200 Microcode
[ 38.636000] [drm] writeback test succeeded in 1 usecs
[ 155.304000] ndiswrapper version 1.49 loaded (smp=yes, preempt=no)
[ 155.428000] ndiswrapper: driver net5211 (,09/17/
[ 155.428000] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 155.796000] ndiswrapper: using IRQ 19
[ 156.020000] wlan0: ethernet device 00:90:96:b2:9e:ea using serialized NDIS driver: net5211, version: 0x20004, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 168C:0013.5.conf
[ 156.020000] wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
[ 156.024000] usbcore: registered new interface driver ndiswrapper
[ 156.024000] ndiswrapper: changing interface name from 'wlan0' to 'ath0'
[ 173.176000] eth0: link down
[ 174.560000] NET: Registered protocol family 17
[ 222.012000] tun: Universal TUN/TAP device driver, 1.6
[ 222.012000] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 227.684000] NET: Registered protocol family 10
[ 227.684000] lo: Disabled Privacy Extensions
[ 227.684000] ADDRCONF(
[ 237.956000] ath0: no IPv6 routers present
lspci -vvnn output:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS300 Host Bridge [1002:5831] (rev 02)
Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 0: Memory at ea000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=4K]
00:01.0 PCI bridge [0604]: ATI Technologies Inc Radeon 9100 IGP AGP Bridge [1002:5838] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00009000-00009fff
Memory behind bridge: e8100000-e81fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:13.0 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #1 [1002:4347] (rev 01) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e8001000 (32-bit, non-prefetchable) [size=4K]
00:13.1 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #2 [1002:4348] (rev 01) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e8002000 (32-bit, non-prefetchable) [size=4K]
00:13.2 USB Controller [0c03]: ATI Technologies Inc EHCI USB Controller [1002:4345] (rev 01) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e8003000 (32-bit, non-prefetchable) [size=4K]
00:14.0 SMBus [0c05]: ATI Technologies Inc ATI SMBus [1002:4353] (rev 18)
Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: I/O ports at 8060 [size=16]
Region 1: Memory at e8004000 (32-bit, non-prefetchable) [size=1K]
00:14.1 IDE interface [0101]: ATI Technologies Inc ATI Dual Channel Bus Master PCI IDE Controller [1002:4349] (prog-if 8a [Master SecP PriP])
Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 8070 [size=16]
00:14.3 ISA bridge [0601]: ATI Technologies Inc Unknown device [1002:434c]
Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc Unknown device [1002:4342] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=04, sec-latency=168
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e8200000-e82fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP150 AC'97 Audio Controller [1002:4341]
Subsystem: Toshiba America Info Systems Unknown device [1179:ff01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e8004400 (32-bit, non-prefetchable) [size=256]
00:14.6 Modem [0703]: ATI Technologies Inc IXP AC'97 Modem [1002:434d] (rev 01) (prog-if 00 [Generic])
Subsystem: Toshiba America Info Systems Unknown device [1179:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e8004800 (32-bit, non-prefetchable) [size=256]
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP] [1002:5835] (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems Unknown device [1179:ff02]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at e8100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e8120000 [disabled] [size=128K]
02:00.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026] (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e8214000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e8210000 (32-bit, non-prefetchable) [size=16K]
02:02.0 Ethernet controller [0200]: Atheros Communications, Inc. AR5212 802.11abg NIC [168c:0013] (rev 01)
Subsystem: Askey Computer Corp. Unknown device [144f:7064]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at e8200000 (32-bit, non-prefetchable) [size=64K]
02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/
Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at e8214800 (32-bit, non-prefetchable) [size=256]
02:04.0 CardBus bridge [0607]: ENE Technology Inc CB-710/2/4 Cardbus Controller [1524:1411]
Subsystem: Toshiba America Info Systems Unknown device [1179:ff01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e8216000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
Memory window 0: 30000000-33fff000 (prefetchable)
Memory window 1: 34000000-37fff000
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
02:04.1 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller [1524:0530]
Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at e8214c00 (32-bit, non-prefetchable) [size=128]
02:04.2 Generic system peripheral [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller [1524:0550] (prog-if 01)
Subsystem: Toshiba America Info Systems Unknown device [1179:ff01]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 18000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e8215000 (32-bit, non-prefetchable) [size=256]
02:04.3 FLASH memory [0501]: ENE Technology Inc FLASH memory: ENE Technology Inc: [1524:0520]
Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at e8215400 (32-bit, non-prefetchable) [size=128]
| Changed in debian-installer: | |
| assignee: | nobody → ubuntu-installer |
