Bug #1413440 “USB stops working after a while (xhci_hcd 0000:00:...” : Bugs : System76

Revision history for this message

Chris Halse Rogers (raof) wrote on 2015-01-22:

#1

AlsaInfo.txt Edit (37.8 KiB, text/plain; charset="utf-8")
BootDmesg.txt Edit (69.9 KiB, text/plain; charset="utf-8")
CurrentDmesg.txt Edit (171.3 KiB, text/plain; charset="utf-8")
Dependencies.txt Edit (2.3 KiB, text/plain; charset="utf-8")
IwConfig.txt Edit (584 bytes, text/plain; charset="utf-8")
Lspci.txt Edit (10.3 KiB, text/plain; charset="utf-8")
Lsusb.txt Edit (343 bytes, text/plain; charset="utf-8")
ProcCpuinfo.txt Edit (7.9 KiB, text/plain; charset="utf-8")
ProcEnviron.txt Edit (126 bytes, text/plain; charset="utf-8")
ProcInterrupts.txt Edit (3.9 KiB, text/plain; charset="utf-8")
ProcModules.txt Edit (6.3 KiB, text/plain; charset="utf-8")
PulseList.txt Edit (28.7 KiB, text/plain; charset="utf-8")
UdevDb.txt Edit (161.2 KiB, text/plain; charset="utf-8")
UdevLog.txt Edit (409.1 KiB, text/plain; charset="utf-8")
WifiSyslog.txt Edit (35.1 KiB, text/plain; charset="utf-8")

Revision history for this message

Brad Figg (brad-figg) wrote on 2015-01-22: Status changed to Confirmed

#2

This change was made by a bot.

Changed in linux (Ubuntu):
status:	New → Confirmed

Alberto Salvia Novella (es20490446e) on 2015-01-22

Changed in linux (Ubuntu):
importance:	Undecided → Critical

Revision history for this message

Joseph Salisbury (jsalisbury) wrote on 2015-01-22:

#3

Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v3.19 kernel[0].

If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'.

If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'.

If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'.
Once testing of the upstream kernel is complete, please mark this bug as "Confirmed".

Thanks in advance.

[0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.19-rc5-vivid/

Changed in linux (Ubuntu):
importance:	Critical → High
status:	Confirmed → Incomplete

Revision history for this message

Chris Halse Rogers (raof) wrote on 2015-01-28:

#4

Ah, there we go. Reproduced on:
Linux RedTail 3.19.0-031900rc5-generic #201501180935 SMP Sun Jan 18 09:36:49 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

tags:	added: kernel-bug-exists-upstream
Changed in linux (Ubuntu):
status:	Incomplete → Confirmed

Revision history for this message

penalvch (penalvch) wrote on 2015-01-28:

#5

Chris Halse Rogers, did this problem not occur in either a prior kernel version or release prior to Vivid?

Also, could you please test the latest mainline kernel 3.19-rc6 and advise to the results?

Changed in linux (Ubuntu):
status:	Confirmed → Incomplete

Revision history for this message

Chris Halse Rogers (raof) wrote on 2015-01-28:

#6

From memory it has occurred in all the Vivid kernels; I can't recall whether or not it applied to earlier kernels.

I'll test the rc6 kernel, but is there any particular reason to think it got fixed since rc5?

Revision history for this message

Chris Halse Rogers (raof) wrote on 2015-01-28:

#7

(This means it has occurred at least as far back as the 3.16 kernel)

Changed in linux (Ubuntu):
status:	Incomplete → Confirmed

Revision history for this message

penalvch (penalvch) wrote on 2015-01-29:

#8

Chris Halse Rogers, just to clarify, this is or is not reproducible in 3.19-rc6?

Changed in linux (Ubuntu):
status:	Confirmed → Incomplete

Revision history for this message

Chris Halse Rogers (raof) wrote on 2015-02-02:

#9

I have not yet reproduced it with 3.19-rc6, but it generally only happens about once a day, and I'm in Brussels for this week.

Revision history for this message

Chris Halse Rogers (raof) wrote on 2015-02-18:

#10

Yup. Reproduced on 3.19 final.

Changed in linux (Ubuntu):
status:	Incomplete → Confirmed

Revision history for this message

penalvch (penalvch) wrote on 2015-02-19:

#11

Chris Halse Rogers, the issue you are reporting is an upstream one. Could you please report this problem to the appropriate mailing list (linux-usb) via https://wiki.ubuntu.com/Bugs/Upstream/kernel ?

Please provide a direct URL to your e-mail to the mailing list once you have made it so that it may be tracked via http://vger.kernel.org/vger-lists.html . It can take a day for the new e-mail to show up in the respective archive.

Thank you for your understanding.

tags:	added: kernel-bug-exists-upstream-3.19
Changed in linux (Ubuntu):
status:	Confirmed → Triaged

Revision history for this message

Colan Schwartz (colan) wrote on 2015-10-02:

#12

Getting this on my System76 Galago UltraPro. Looks like the latest incarnation of bug #1254581 which I previously got.

Jason Gerard DeRose (jderose) on 2015-10-02

Changed in system76:
status:	New → Triaged
importance:	Undecided → High

Revision history for this message

Clancy (spamplz) wrote on 2015-10-07:

#13

Download full text (8.4 KiB)

I have a similar issue, though I've so far only seen it once. I plugged in two separate HDD's into two separate USB3 ports and neither worked. The syslog is below. Rebooting the system cleared up the issue and they both work ok afterwards.

Kernel: 3.13.0-62-generic
Linux Mint 17 qiana
ASUS P8H61-I Motherboard

Oct 7 08:41:01 server kernel: [246482.379384] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
Oct 7 08:41:01 server kernel: [246482.392411] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted.
Oct 7 08:41:03 server kernel: [246484.150227] usb 4-1: New USB device found, idVendor=174c, idProduct=5106
Oct 7 08:41:03 server kernel: [246484.150234] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
Oct 7 08:41:03 server kernel: [246484.150237] usb 4-1: Product: AS2105
Oct 7 08:41:03 server kernel: [246484.150240] usb 4-1: Manufacturer: ASMedia
Oct 7 08:41:03 server kernel: [246484.150242] usb 4-1: SerialNumber: TF755AY9KZXWGM
Oct 7 08:41:03 server kernel: [246484.231617] usb-storage 4-1:1.0: USB Mass Storage device detected
Oct 7 08:41:03 server kernel: [246484.231831] scsi6 : usb-storage 4-1:1.0
Oct 7 08:41:03 server kernel: [246484.232051] usbcore: registered new interface driver usb-storage
Oct 7 08:41:04 server kernel: [246485.231633] scsi 6:0:0:0: Direct-Access HGST HTS 725050A7E630 GH2Z PQ: 0 ANSI: 0
Oct 7 08:41:04 server kernel: [246485.232021] sd 6:0:0:0: Attached scsi generic sg3 type 0
Oct 7 08:41:04 server kernel: [246485.232283] sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 7 08:41:04 server kernel: [246485.232674] sd 6:0:0:0: [sdc] Write Protect is off
Oct 7 08:41:04 server kernel: [246485.232678] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
Oct 7 08:41:04 server kernel: [246485.233944] sd 6:0:0:0: [sdc] No Caching mode page found
Oct 7 08:41:04 server kernel: [246485.233948] sd 6:0:0:0: [sdc] Assuming drive cache: write through
Oct 7 08:41:04 server kernel: [246485.235344] sd 6:0:0:0: [sdc] No Caching mode page found
Oct 7 08:41:04 server kernel: [246485.235349] sd 6:0:0:0: [sdc] Assuming drive cache: write through
Oct 7 08:41:04 server kernel: [246485.271401] sdc: sdc1
Oct 7 08:41:04 server kernel: [246485.272560] sd 6:0:0:0: [sdc] No Caching mode page found
Oct 7 08:41:04 server kernel: [246485.272563] sd 6:0:0:0: [sdc] Assuming drive cache: write through
Oct 7 08:41:04 server kernel: [246485.272566] sd 6:0:0:0: [sdc] Attached SCSI disk
Oct 7 08:41:11 server kernel: [246492.384511] usb 3-2: new high-speed USB device number 4 using xhci_hcd
Oct 7 08:41:27 server kernel: [246497.388741] xhci_hcd 0000:04:00.0: Timeout while waiting for address device command

Oct 7 08:41:27 server kernel: [246508.406142] usb 3-2: Device not responding to set address.
Oct 7 08:41:27 server kernel: [246508.610298] usb 3-2: device not accepting address 4, error -71
Oct 7 08:41:48 server kernel: [246513.614556] xhci_hcd 0000:04:00.0: Timeout while waiting for a slot
Oct 7 08:41:48 server kernel: [246524.820348] ------------[ cut here ]------------
Oct 7 08:41:48 server kernel: [246524.820356] WARNING: CPU: 0 PID:...

I have a similar issue, though I've so far only seen it once. I plugged in two separate HDD's into two separate USB3 ports and neither worked. The syslog is below. Rebooting the system cleared up the issue and they both work ok afterwards.

Kernel: 3.13.0-62-generic
Linux Mint 17 qiana
ASUS P8H61-I Motherboard

Oct  7 08:41:01 server kernel: [246482.379384] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
Oct  7 08:41:01 server kernel: [246482.392411] usb 4-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
Oct  7 08:41:03 server kernel: [246484.150227] usb 4-1: New USB device found, idVendor=174c, idProduct=5106
Oct  7 08:41:03 server kernel: [246484.150234] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
Oct  7 08:41:03 server kernel: [246484.150237] usb 4-1: Product: AS2105
Oct  7 08:41:03 server kernel: [246484.150240] usb 4-1: Manufacturer: ASMedia
Oct  7 08:41:03 server kernel: [246484.150242] usb 4-1: SerialNumber:       TF755AY9KZXWGM
Oct  7 08:41:03 server kernel: [246484.231617] usb-storage 4-1:1.0: USB Mass Storage device detected
Oct  7 08:41:03 server kernel: [246484.231831] scsi6 : usb-storage 4-1:1.0
Oct  7 08:41:03 server kernel: [246484.232051] usbcore: registered new interface driver usb-storage
Oct  7 08:41:04 server kernel: [246485.231633] scsi 6:0:0:0: Direct-Access     HGST HTS 725050A7E630     GH2Z PQ: 0 ANSI: 0
Oct  7 08:41:04 server kernel: [246485.232021] sd 6:0:0:0: Attached scsi generic sg3 type 0
Oct  7 08:41:04 server kernel: [246485.232283] sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct  7 08:41:04 server kernel: [246485.232674] sd 6:0:0:0: [sdc] Write Protect is off
Oct  7 08:41:04 server kernel: [246485.232678] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
Oct  7 08:41:04 server kernel: [246485.233944] sd 6:0:0:0: [sdc] No Caching mode page found
Oct  7 08:41:04 server kernel: [246485.233948] sd 6:0:0:0: [sdc] Assuming drive cache: write through
Oct  7 08:41:04 server kernel: [246485.235344] sd 6:0:0:0: [sdc] No Caching mode page found
Oct  7 08:41:04 server kernel: [246485.235349] sd 6:0:0:0: [sdc] Assuming drive cache: write through
Oct  7 08:41:04 server kernel: [246485.271401]  sdc: sdc1
Oct  7 08:41:04 server kernel: [246485.272560] sd 6:0:0:0: [sdc] No Caching mode page found
Oct  7 08:41:04 server kernel: [246485.272563] sd 6:0:0:0: [sdc] Assuming drive cache: write through
Oct  7 08:41:04 server kernel: [246485.272566] sd 6:0:0:0: [sdc] Attached SCSI disk
Oct  7 08:41:11 server kernel: [246492.384511] usb 3-2: new high-speed USB device number 4 using xhci_hcd
Oct  7 08:41:27 server kernel: [246497.388741] xhci_hcd 0000:04:00.0: Timeout while waiting for address device command

Oct  7 08:41:27 server kernel: [246508.406142] usb 3-2: Device not responding to set address.
Oct  7 08:41:27 server kernel: [246508.610298] usb 3-2: device not accepting address 4, error -71
Oct  7 08:41:48 server kernel: [246513.614556] xhci_hcd 0000:04:00.0: Timeout while waiting for a slot
Oct  7 08:41:48 server kernel: [246524.820348] ------------[ cut here ]------------
Oct  7 08:41:48 server kernel: [246524.820356] WARNING: CPU: 0 PID: 25 at /build/linux-HLTJOz/linux-3.13.0/kernel/watchdog.c:245 watchdog_overflow_callback+0xac/0xd0()
Oct  7 08:41:48 server kernel: [246524.820358] Watchdog detected hard LOCKUP on cpu 0
Oct  7 08:41:48 server kernel: [246524.820359] Modules linked in: usb_storage snd_seq_dummy cuse snd_atiixp_modem snd_via82xx_modem snd_intel8x0m snd_ac97_codec ac97_bus dm_crypt snd_hda_codec_hdmi rfcomm bnep bluetooth eeepc_wmi asus_wmi sparse_keymap snd_hda_codec_via snd_hda_intel snd_usb_audio snd_usbmidi_lib snd_hda_codec snd_hwdep binfmt_misc snd_pcm nfsd auth_rpcgss nfs_acl intel_rapl nfs lockd snd_page_alloc sunrpc fscache x86_pkg_temp_thermal snd_seq_midi intel_powerclamp snd_seq_midi_event snd_rawmidi snd_seq kvm snd_seq_device crc32_pclmul snd_timer serio_raw joydev snd lirc_xbox(OX) lirc_dev(OX) nvidia(POX) lpc_ich drm soundcore mac_hid parport_pc ppdev mei_me mei vhba(OX) shpchp wmi it87 hwmon_vid coretemp lp parport hid_generic usbhid hid psmouse video ahci r8169 libahci mii
Oct  7 08:41:48 server kernel: [246524.820408] CPU: 0 PID: 25 Comm: khubd Tainted: P           OX 3.13.0-62-generic #102-Ubuntu
Oct  7 08:41:48 server kernel: [246524.820409] Hardware name: System manufacturer System Product Name/P8H61-I, BIOS 0605 09/30/2011
Oct  7 08:41:48 server kernel: [246524.820411]  00000000 00000000 f064fb64 c165878f f064fba4 f064fb94 c1056b3e c183e098
Oct  7 08:41:48 server kernel: [246524.820416]  f064fbc0 00000019 c183e0c0 000000f5 c10e845c c10e845c c10e83b0 000000c8
Oct  7 08:41:48 server kernel: [246524.820420]  f040ec00 f064fbac c1056b93 00000009 f064fba4 c183e098 f064fbc0 f064fbc4
Oct  7 08:41:48 server kernel: [246524.820425] Call Trace:
Oct  7 08:41:48 server kernel: [246524.820430]  [<c165878f>] dump_stack+0x41/0x52
Oct  7 08:41:48 server kernel: [246524.820435]  [<c1056b3e>] warn_slowpath_common+0x7e/0xa0
Oct  7 08:41:48 server kernel: [246524.820438]  [<c10e845c>] ? watchdog_overflow_callback+0xac/0xd0
Oct  7 08:41:48 server kernel: [246524.820441]  [<c10e845c>] ? watchdog_overflow_callback+0xac/0xd0
Oct  7 08:41:48 server kernel: [246524.820444]  [<c10e83b0>] ? restart_watchdog_hrtimer+0x50/0x50
Oct  7 08:41:48 server kernel: [246524.820447]  [<c1056b93>] warn_slowpath_fmt+0x33/0x40
Oct  7 08:41:48 server kernel: [246524.820450]  [<c10e845c>] watchdog_overflow_callback+0xac/0xd0
Oct  7 08:41:48 server kernel: [246524.820453]  [<c111a60d>] __perf_event_overflow+0xad/0x350
Oct  7 08:41:48 server kernel: [246524.820457]  [<c12fdf63>] ? vsnprintf+0x193/0x3d0
Oct  7 08:41:48 server kernel: [246524.820460]  [<c111ae65>] perf_event_overflow+0x15/0x20
Oct  7 08:41:48 server kernel: [246524.820464]  [<c1028e14>] intel_pmu_handle_irq+0x214/0x410
Oct  7 08:41:48 server kernel: [246524.820468]  [<c10a299d>] ? msg_print_text+0xcd/0x190
Oct  7 08:41:48 server kernel: [246524.820472]  [<c1112f3b>] ? irq_work_queue+0x5b/0xa0
Oct  7 08:41:48 server kernel: [246524.820475]  [<c10a4097>] ? console_unlock+0x287/0x460
Oct  7 08:41:48 server kernel: [246524.820479]  [<c166136c>] perf_event_nmi_handler+0x2c/0x50
Oct  7 08:41:48 server kernel: [246524.820483]  [<c1660af7>] nmi_handle.isra.2+0x57/0x1a0
Oct  7 08:41:48 server kernel: [246524.820486]  [<c140d966>] ? dev_vprintk_emit+0x66/0x90
Oct  7 08:41:48 server kernel: [246524.820490]  [<c1660e27>] do_nmi+0x1e7/0x3d0
Oct  7 08:41:48 server kernel: [246524.820494]  [<c1062f21>] ? del_timer_sync+0x41/0x50
Oct  7 08:41:48 server kernel: [246524.820498]  [<c1660193>] nmi_stack_correct+0x2f/0x34
Oct  7 08:41:48 server kernel: [246524.820503]  [<c14d4952>] ? xhci_handshake+0x32/0x60
Oct  7 08:41:48 server kernel: [246524.820506]  [<c14dfe7c>] xhci_cancel_cmd+0x17c/0x250
Oct  7 08:41:48 server kernel: [246524.820509]  [<c14d92d2>] xhci_alloc_dev+0x162/0x260
Oct  7 08:41:48 server kernel: [246524.820512]  [<c14a3899>] ? usb_alloc_dev+0x29/0x2b0
Oct  7 08:41:48 server kernel: [246524.820515]  [<c14a38c9>] usb_alloc_dev+0x59/0x2b0
Oct  7 08:41:48 server kernel: [246524.820518]  [<c12f5cf5>] ? kobject_put+0x25/0x60
Oct  7 08:41:48 server kernel: [246524.820520]  [<c14d9161>] ? xhci_free_dev+0x121/0x130
Oct  7 08:41:48 server kernel: [246524.820524]  [<c14a943e>] hub_port_connect_change+0x35e/0xaa0
Oct  7 08:41:48 server kernel: [246524.820527]  [<c14a9fd8>] hub_events+0x458/0xa80
Oct  7 08:41:48 server kernel: [246524.820531]  [<c165bf08>] ? __schedule+0x358/0x770
Oct  7 08:41:48 server kernel: [246524.820534]  [<c10916a4>] ? finish_wait+0x44/0x60
Oct  7 08:41:48 server kernel: [246524.820537]  [<c14aa625>] hub_thread+0x25/0x140
Oct  7 08:41:48 server kernel: [246524.820540]  [<c1091880>] ? prepare_to_wait_event+0xd0/0xd0
Oct  7 08:41:48 server kernel: [246524.820543]  [<c14aa600>] ? hub_events+0xa80/0xa80
Oct  7 08:41:48 server kernel: [246524.820546]  [<c10754f1>] kthread+0xa1/0xc0
Oct  7 08:41:48 server kernel: [246524.820550]  [<c1666ab7>] ret_from_kernel_thread+0x1b/0x28
Oct  7 08:41:48 server kernel: [246524.820552]  [<c1075450>] ? kthread_create_on_node+0x140/0x140
Oct  7 08:41:48 server kernel: [246524.820555] ---[ end trace a9957dfe9cb266c2 ]---
Oct  7 08:41:48 server kernel: [246524.820557] perf samples too long (6030 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
Oct  7 08:41:48 server kernel: [246529.563106] xhci_hcd 0000:04:00.0: Stopped the command ring failed, maybe the host is dead
Oct  7 08:41:48 server kernel: [246529.563120] xhci_hcd 0000:04:00.0: Abort command ring failed

Revision history for this message

Federico Briata (federicobriata) wrote on 2015-10-08:

#14

Hi Folks,
I have the same problem and I'm on nc4400 with USB2 only.
Anyone know latest stable kernel?

$ uname -a
Linux HP 3.13.0-65-generic #106-Ubuntu SMP Fri Oct 2 22:12:08 UTC 2015 i686 i686 i686 GNU/Linux
$ dmesg | grep usb | grep USB
[57876.412150] usb 3-2: new full-speed USB device number 91 using uhci_hcd
[57876.592397] usb 3-2: New USB device found, idVendor=1ec4, idProduct=8004
[57876.592407] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[57876.916335] usb 3-2: USB disconnect, device number 91
[57878.944147] usb 3-2: new full-speed USB device number 92 using uhci_hcd
[57879.124356] usb 3-2: New USB device found, idVendor=1ec4, idProduct=8004
[57879.124366] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[57879.396302] usb 3-2: USB disconnect, device number 92
[57881.620115] usb 3-2: new full-speed USB device number 93 using uhci_hcd
[57881.801383] usb 3-2: New USB device found, idVendor=1ec4, idProduct=8004
[57881.801394] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[57882.124227] usb 3-2: USB disconnect, device number 93
[57884.348170] usb 3-2: new full-speed USB device number 94 using uhci_hcd
[57884.528399] usb 3-2: New USB device found, idVendor=1ec4, idProduct=8004
[57884.528410] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[57884.852319] usb 3-2: USB disconnect, device number 94

Revision history for this message

Chris Halse Rogers (raof) wrote on 2015-10-09:

#15

FWIW I can't recall getting this error on the 4.2 kernels currently in Wily. This might be fixed in 15.10.

Revision history for this message

Matthew D. Mower (mdmower) wrote on 2015-11-18:

#16

Chris Halse Rogers: This issue still exists in Wily (as of Nov 18, 2015 with kernel 4.2.0-18-generic.

Kernel log: http://paste.ubuntu.com/13335527/
Note: I've stripped out UFW lines that are cumbersome to read past.

Line 1109 marks the time that I had to hard reset my computer because every USB port was dead (re-plugging did not help).

Revision history for this message

Matthew D. Mower (mdmower) wrote on 2015-12-01:

#17

Following-up on #16: Obviously, this is _not_ the solution for everyone, but for my work computer, system stability is far more important that USB3. I disabled xhci in UEFI (so ehci is used instead) and have not had any more non-responsive USB ports in close to two weeks.

Revision history for this message

Rocko (rockorequin) wrote on 2016-07-08:

#18

Does this bug happen for people after a USB drive has spun down and the computer tries to access it? My USB freezing issue goes away if I disable UAS for a particular drive. It works fine with UAS until it spins down but the USB subsystem freezes when it tries to spin it up, requiring me to reboot the PC and power cycle the drive.

To disable UAS for the drive, first find its identifier with the lsbusb command. For example mine looks like this, ie with identifier 1058:1230:

Bus 002 Device 003: ID 1058:1230 Western Digital Technologies, Inc. My Book

Add a file like /etc/modprobe.d/usb_storage.conf with the contents and the appropriate identifier:

options usb_storage quirks=1058:1230:u

and run "sudo update-initramfs -u -k all" and reboot.

Revision history for this message

Colan Schwartz (colan) wrote on 2016-07-08:

#19

In my case there are no drives involved, just a hub with a camera.

Revision history for this message

Ian Canino (ian-canino) wrote on 2017-03-28:

#20

This issue still exists on
Laptop: Macbook Pro 11,1 (2014 13" model)
Ubuntu: Yakkety (16.10)
Kernel: Linux version 4.8.0-41-generic (buildd@lgw01-18)

Revision history for this message

Max Rumpf (maxr1998) wrote on 2017-04-10:

#21

I also have this issue on my Asus M5A99X EVO motherboard with a AMD FX-4100 CPU; Ubuntu 16.10 and kernel version 4.8.0-46-generic.

Revision history for this message

martonmiklos (martonmiklosqdev) wrote on 2017-04-13:

#22

This issue still exists on:
iMac 27" late 2015
Ubuntu 14.04 both with
Kernel: 3.19.0-80 and 4.4.0-62

It only happends when I a Saleae USB 3.0 Logic analyzer is plugged into the machine. (This is the only USB 3.0 device attached to the system)

Revision history for this message

Kai-Heng Feng (kaihengfeng) wrote on 2017-04-17:

#23

Latest mainline kernel has several xhci race condition fix. Can you try it?

Revision history for this message

Jason A. Donenfeld (zx2c4) wrote on 2017-05-19:

#24

I'm having this issue on kernel 4.11.1.

[48112.422418] ------------[ cut here ]------------
[48112.422441] WARNING: CPU: 0 PID: 14420 at drivers/usb/host/xhci-ring.c:1390 handle_cmd_completion+0xb17/0xc00 [xhci_hcd]
[48112.422446] Modules linked in: xt_hashlimit ip6_udp_tunnel udp_tunnel rfcomm pl2303 hid_lenovo bnep cdc_mbim cdc_ncm qcserial cdc_wdm usb_wwan usbnet usbserial mii uvcvideo videobuf2_vmalloc videobuf2_memops
[48112.422480] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[48112.422481] videobuf2_v4l2 videobuf2_core cdc_acm videodev btusb btintel usbhid bluetooth af_packet nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter xt_hl nf_conntrack_ipv6 nf_defrag_ipv6 xt_multiport 8021q xt_conntrack nf_conntrack ip6table_filter ip6_tables algif_skcipher joydev mousedev snd_hda_codec_realtek snd_hda_codec_generic arc4 iwlmvm mac80211 rtsx_pci_sdmmc mmc_core intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iwlwifi snd_hda_intel ahci irqbypass snd_hda_codec crc32_pclmul snd_hwdep xhci_pci xhci_hcd libahci crc32c_intel snd_hda_core mei_me cfg80211 usbcore snd_pcm rtsx_pci ie31200_edac input_leds mfd_core e1000e libata usb_common mei snd_timer psmouse edac_core intel_pch_thermal thinkpad_acpi snd soundcore led_class rfkill tpm_tis tpm_tis_core evdev
[48112.422556] tpm sch_fq_codel
[48112.422565] CPU: 0 PID: 14420 Comm: kworker/0:7 Tainted: P W O 4.11.1-gentoo #1
[48112.422567] Hardware name: LENOVO 20ENCTO1WW/20ENCTO1WW, BIOS N1EET65W (1.38 ) 02/09/2017
[48112.422577] Workqueue: events xhci_handle_command_timeout [xhci_hcd]
[48112.422580] Call Trace:
[48112.422583] <IRQ>
[48112.422589] ? dump_stack+0x46/0x5e
[48112.422595] ? __warn+0xb9/0xe0
[48112.422603] ? handle_cmd_completion+0xb17/0xc00 [xhci_hcd]
[48112.422609] ? try_to_wake_up+0x22e/0x390
[48112.422617] ? xhci_irq+0x38f/0x1460 [xhci_hcd]
[48112.422624] ? run_timer_softirq.part.2+0x4c/0xa0
[48112.422629] ? expire_timers+0x6e/0xe0
[48112.422634] ? __handle_irq_event_percpu+0x36/0x190
[48112.422637] ? handle_irq_event_percpu+0x1b/0x50
[48112.422640] ? handle_irq_event+0x22/0x40
[48112.422644] ? handle_edge_irq+0x65/0x120
[48112.422649] ? handle_irq+0x11/0x20
[48112.422653] ? do_IRQ+0x3c/0xc0
[48112.422658] ? common_interrupt+0x7f/0x7f
[48112.422660] </IRQ>
[48112.422664] ? _raw_spin_unlock_irqrestore+0x5/0x10
[48112.422671] ? xhci_handle_command_timeout+0xf4/0x1b0 [xhci_hcd]
[48112.422684] ? process_one_work+0x1d9/0x450
[48112.422689] ? worker_thread+0x42/0x4b0
[48112.422695] ? process_one_work+0x450/0x450
[48112.422698] ? kthread+0x112/0x130
[48112.422702] ? kthread_create_on_node+0x40/0x40
[48112.422705] ? ret_from_fork+0x23/0x30
[48112.422709] ---[ end trace eb9505885b6e349e ]---
[48113.446247] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command.
[48113.446250] xhci_hcd 0000:00:14.0: Assuming host is dying, halting host.
[48113.446348] xhci_hcd 0000:00:14.0: HC died; cleaning up

I'm having this issue on kernel 4.11.1.

[48112.422418] ------------[ cut here ]------------
[48112.422441] WARNING: CPU: 0 PID: 14420 at drivers/usb/host/xhci-ring.c:1390 handle_cmd_completion+0xb17/0xc00 [xhci_hcd]
[48112.422446] Modules linked in: xt_hashlimit ip6_udp_tunnel udp_tunnel rfcomm pl2303 hid_lenovo bnep cdc_mbim cdc_ncm qcserial cdc_wdm usb_wwan usbnet usbserial mii uvcvideo videobuf2_vmalloc videobuf2_memops
[48112.422480] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[48112.422481]  videobuf2_v4l2 videobuf2_core cdc_acm videodev btusb btintel usbhid bluetooth af_packet nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter xt_hl nf_conntrack_ipv6 nf_defrag_ipv6 xt_multiport 8021q xt_conntrack nf_conntrack ip6table_filter ip6_tables algif_skcipher joydev mousedev snd_hda_codec_realtek snd_hda_codec_generic arc4 iwlmvm mac80211 rtsx_pci_sdmmc mmc_core intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iwlwifi snd_hda_intel ahci irqbypass snd_hda_codec crc32_pclmul snd_hwdep xhci_pci xhci_hcd libahci crc32c_intel snd_hda_core mei_me cfg80211 usbcore snd_pcm rtsx_pci ie31200_edac input_leds mfd_core e1000e libata usb_common mei snd_timer psmouse edac_core intel_pch_thermal thinkpad_acpi snd soundcore led_class rfkill tpm_tis tpm_tis_core evdev
[48112.422556]  tpm sch_fq_codel
[48112.422565] CPU: 0 PID: 14420 Comm: kworker/0:7 Tainted: P        W  O    4.11.1-gentoo #1
[48112.422567] Hardware name: LENOVO 20ENCTO1WW/20ENCTO1WW, BIOS N1EET65W (1.38 ) 02/09/2017
[48112.422577] Workqueue: events xhci_handle_command_timeout [xhci_hcd]
[48112.422580] Call Trace:
[48112.422583]  <IRQ>
[48112.422589]  ? dump_stack+0x46/0x5e
[48112.422595]  ? __warn+0xb9/0xe0
[48112.422603]  ? handle_cmd_completion+0xb17/0xc00 [xhci_hcd]
[48112.422609]  ? try_to_wake_up+0x22e/0x390
[48112.422617]  ? xhci_irq+0x38f/0x1460 [xhci_hcd]
[48112.422624]  ? run_timer_softirq.part.2+0x4c/0xa0
[48112.422629]  ? expire_timers+0x6e/0xe0
[48112.422634]  ? __handle_irq_event_percpu+0x36/0x190
[48112.422637]  ? handle_irq_event_percpu+0x1b/0x50
[48112.422640]  ? handle_irq_event+0x22/0x40
[48112.422644]  ? handle_edge_irq+0x65/0x120
[48112.422649]  ? handle_irq+0x11/0x20
[48112.422653]  ? do_IRQ+0x3c/0xc0
[48112.422658]  ? common_interrupt+0x7f/0x7f
[48112.422660]  </IRQ>
[48112.422664]  ? _raw_spin_unlock_irqrestore+0x5/0x10
[48112.422671]  ? xhci_handle_command_timeout+0xf4/0x1b0 [xhci_hcd]
[48112.422684]  ? process_one_work+0x1d9/0x450
[48112.422689]  ? worker_thread+0x42/0x4b0
[48112.422695]  ? process_one_work+0x450/0x450
[48112.422698]  ? kthread+0x112/0x130
[48112.422702]  ? kthread_create_on_node+0x40/0x40
[48112.422705]  ? ret_from_fork+0x23/0x30
[48112.422709] ---[ end trace eb9505885b6e349e ]---
[48113.446247] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command.
[48113.446250] xhci_hcd 0000:00:14.0: Assuming host is dying, halting host.
[48113.446348] xhci_hcd 0000:00:14.0: HC died; cleaning up

Revision history for this message

Sebastiaan Breedveld (s-breedveld) wrote on 2018-02-28:

#25

I am having the same problem, but only after resume from suspend or hibernate. I first thought it was a bluetooth problem, as my bluetooth mouse stops working after a minute or so after resume. However, both the bluetooth adapter is gone (bluetoothctl says "No Default controller"), but also ordinary USB mice will not work.

It seems that HCI dies, and the kernel decides to remove everything else as well. Touchpad works however.

I am running 18.04 alpha with 4.16rc3 (4.16.0-041600rc3-generic) mainline kernel. Hardware: Lenovo Thinkpad E580.

Full syslog output. BTW: "MX Anywhere 2" is a BT mouse, not a keyboard. Not sure why it is registered as such.

Feb 28 14:18:00 miCycle bluetoothd[1040]: Unable to register org.bluez.Battery1 interface for /org/bluez/hci0/dev_E8_02_AE_59_01_F8
Feb 28 14:18:01 miCycle kernel: [13423.017919] input: MX Anywhere 2 as /devices/virtual/misc/uhid/0005:046D:B018.0002/input/input19
Feb 28 14:18:01 miCycle kernel: [13423.018374] hid-generic 0005:046D:B018.0002: input,hidraw0: BLUETOOTH HID v0.09 Keyboard [MX Anywhere 2] on A0:D3:7A:E0:62:A2
Feb 28 14:18:01 miCycle upowerd[1731]: unhandled action 'bind' on /sys/devices/virtual/misc/uhid/0005:046D:B018.0002
Feb 28 14:18:15 miCycle blueman-mechanism: Exiting
Feb 28 14:18:42 miCycle kernel: [13464.682662] xhci_hcd 0000:00:14.0: xHC is not running.
Feb 28 14:18:42 miCycle kernel: [13464.724396] xhci_hcd 0000:00:14.0: xHCI host controller not responding, assume dead
Feb 28 14:18:42 miCycle kernel: [13464.724414] xhci_hcd 0000:00:14.0: HC died; cleaning up
Feb 28 14:18:42 miCycle kernel: [13464.746152] usb 1-5: USB disconnect, device number 4
Feb 28 14:18:42 miCycle kernel: [13464.801790] usb 1-6: USB disconnect, device number 3
Feb 28 14:18:42 miCycle systemd[1]: bluetooth.target: Unit not needed anymore. Stopping.
Feb 28 14:18:42 miCycle systemd[1]: Stopped target Bluetooth.
Feb 28 14:18:42 miCycle upowerd[1731]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1
Feb 28 14:18:42 miCycle upowerd[1731]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0
Feb 28 14:18:42 miCycle upowerd[1731]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1
Feb 28 14:18:42 miCycle upowerd[1731]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0
Feb 28 14:18:42 miCycle upowerd[1731]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-5
Feb 28 14:18:42 miCycle upowerd[1731]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-6
Feb 28 14:18:42 miCycle acpid: input device has been disconnected, fd 19
Feb 28 14:18:42 miCycle bluetoothd[1040]: Endpoint unregistered: sender=:1.52 path=/MediaEndpoint/A2DPSource
Feb 28 14:18:42 miCycle bluetoothd[1040]: Endpoint unregistered: sender=:1.52 path=/MediaEndpoint/A2DPSink
Feb 28 14:18:42 miCycle upowerd[1731]: unhandled action 'unbind' on /sys/devices/virtual/misc/uhid/0005:046D:B018.0002
Feb 28 14:18:42 miCycle NetworkManager[879]: <info> [1519823922.9176] bluez5: NAP: removed interface A0:D3:7A:E0:62:A2

I am having the same problem, but only after resume from suspend or hibernate. I first thought it was a bluetooth problem, as my bluetooth mouse stops working after a minute or so after resume. However, both the bluetooth adapter is gone (bluetoothctl says "No Default controller"), but also ordinary USB mice will not work.

It seems that HCI dies, and the kernel decides to remove everything else as well. Touchpad works however.

I am running 18.04 alpha with 4.16rc3 (4.16.0-041600rc3-generic) mainline kernel. Hardware: Lenovo Thinkpad E580.

Full syslog output. BTW: "MX Anywhere 2" is a BT mouse, not a keyboard. Not sure why it is registered as such.

Feb 28 14:18:00 miCycle bluetoothd[1040]: Unable to register org.bluez.Battery1 interface for /org/bluez/hci0/dev_E8_02_AE_59_01_F8
Feb 28 14:18:01 miCycle kernel: [13423.017919] input: MX Anywhere 2 as /devices/virtual/misc/uhid/0005:046D:B018.0002/input/input19
Feb 28 14:18:01 miCycle kernel: [13423.018374] hid-generic 0005:046D:B018.0002: input,hidraw0: BLUETOOTH HID v0.09 Keyboard [MX Anywhere 2] on A0:D3:7A:E0:62:A2
Feb 28 14:18:01 miCycle upowerd[1731]: unhandled action 'bind' on /sys/devices/virtual/misc/uhid/0005:046D:B018.0002
Feb 28 14:18:15 miCycle blueman-mechanism: Exiting
Feb 28 14:18:42 miCycle kernel: [13464.682662] xhci_hcd 0000:00:14.0: xHC is not running.
Feb 28 14:18:42 miCycle kernel: [13464.724396] xhci_hcd 0000:00:14.0: xHCI host controller not responding, assume dead
Feb 28 14:18:42 miCycle kernel: [13464.724414] xhci_hcd 0000:00:14.0: HC died; cleaning up
Feb 28 14:18:42 miCycle kernel: [13464.746152] usb 1-5: USB disconnect, device number 4
Feb 28 14:18:42 miCycle kernel: [13464.801790] usb 1-6: USB disconnect, device number 3
Feb 28 14:18:42 miCycle systemd[1]: bluetooth.target: Unit not needed anymore. Stopping.
Feb 28 14:18:42 miCycle systemd[1]: Stopped target Bluetooth.
Feb 28 14:18:42 miCycle upowerd[1731]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1
Feb 28 14:18:42 miCycle upowerd[1731]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0
Feb 28 14:18:42 miCycle upowerd[1731]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1
Feb 28 14:18:42 miCycle upowerd[1731]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0
Feb 28 14:18:42 miCycle upowerd[1731]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-5
Feb 28 14:18:42 miCycle upowerd[1731]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-6
Feb 28 14:18:42 miCycle acpid: input device has been disconnected, fd 19
Feb 28 14:18:42 miCycle bluetoothd[1040]: Endpoint unregistered: sender=:1.52 path=/MediaEndpoint/A2DPSource
Feb 28 14:18:42 miCycle bluetoothd[1040]: Endpoint unregistered: sender=:1.52 path=/MediaEndpoint/A2DPSink
Feb 28 14:18:42 miCycle upowerd[1731]: unhandled action 'unbind' on /sys/devices/virtual/misc/uhid/0005:046D:B018.0002
Feb 28 14:18:42 miCycle NetworkManager[879]: <info>  [1519823922.9176] bluez5: NAP: removed interface A0:D3:7A:E0:62:A2

Revision history for this message

Sebastiaan Breedveld (s-breedveld) wrote on 2018-04-11:

#26

I can finally report a working solution for me.

Ubuntu 18.04 alpha
kernel 4.15.0-13-generic

Add these options to the GRUB command line:
pci=nomsi iommu=soft

USB works like a charm after resume :)

Revision history for this message

Daniel Mulholland (dan-mulholland) wrote on 2018-04-15:

#27

FWIW With a Dell XPS 9360 and Kubuntu 17.10, same issue on the latest kernel and many previous:

uname -a
Linux mulhollandd-XPS-13-9360 4.16.2-041602-generic #201804121130 SMP Thu Apr 12 11:32:17 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

lsb
_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 17.10
Release: 17.10
Codename: artful

I will test the solution mentioned by @s-breedveld of applying: "pci=nomsi iommu=soft" and report if this helps.

In my case this is a bluetooth mouse which disappears after suspend.

A dmesg output indicates:

[ 3380.759427] xhci_hcd 0000:00:14.0: xHC is not running.
[ 3380.774604] xhci_hcd 0000:00:14.0: xHCI host controller not responding, assume dead
[ 3380.774627] xhci_hcd 0000:00:14.0: HC died; cleaning up
[ 3380.775306] usb 2-1: USB disconnect, device number 2
[ 3381.059095] usb 1-1: USB disconnect, device number 2
[ 3381.059098] usb 1-1.2: USB disconnect, device number 4
[ 3381.059408] usb 1-3: USB disconnect, device number 3
[ 3381.059735] usb 1-5: USB disconnect, device number 5

A power-down is usually required to fix this, a reboot does bring the device back to life.

Revision history for this message

Felipe Reyes (freyes) wrote on 2018-04-25:

#28

dell latitude 7380, having the same issue, I will try the workaround from comment #26

~ $ uname -a
Linux maul 4.15.0-15-generic #16-Ubuntu SMP Wed Apr 4 13:58:14 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
~ $ lsb_release -a
LSB Version: core-9.20170808ubuntu1-noarch:security-9.20170808ubuntu1-noarch
Distributor ID: Ubuntu
Description: Ubuntu Bionic Beaver (development branch)
Release: 18.04
Codename: bionic

[170301.135847] ACPI: Waking up from system sleep state S3
[170301.907173] ACPI: EC: event unblocked
[170301.929222] usb usb1: root hub lost power or was reset
[170301.929225] usb usb2: root hub lost power or was reset
[170302.273594] usb 1-5: reset high-speed USB device number 2 using xhci_hcd
[170302.449792] restoring control 00000000-0000-0000-0000-000000000101/10/5
[170302.449795] restoring control 00000000-0000-0000-0000-000000000101/12/11
[170303.165975] [drm] RC6 on
[170304.839647] xhci_hcd 0000:00:14.0: Cannot set link state.
[170304.839723] usb usb2-port2: cannot disable (err = -32)
...
[170304.844725] OOM killer enabled.
[170304.844725] Restarting tasks ...
[170304.848669] usb 2-2: USB disconnect, device number 9
...
[170307.034795] xhci_hcd 0000:00:14.0: xHCI host controller not responding, assume dead
[170307.034810] xhci_hcd 0000:00:14.0: HC died; cleaning up
[170307.034880] usb 1-5: USB disconnect, device number 2

Revision history for this message

Alex Garel (alex-garel) wrote on 2018-05-02:

#29

Download full text (17.2 KiB)

Hello, I have the same issue with my laptop (very annoying).

I will try to upgrade to 18.04, see if it fixes, and, if not, try on s-breedveld solution.

$ sudo lshw
[sudo] Mot de passe de alex :
Désolé, essayez de nouveau.
[sudo] Mot de passe de alex :
tignasse
    description: Ordinateur portable
    produit: Skylake Platform (System SKUNumber)
    fabriquant: Intel Corporation
    version: 0.1
    numéro de série: System Serial Number
    bits: 64 bits
    fonctionnalités: smbios-3.0 dmi-3.0 smp vsyscall32
    configuration: boot=normal chassis=laptop family=Skylake System sku=System SKUNumber uuid=00020003-0004-0005-0006-000700080009
  *-core
       description: Carte mère
       produit: WhiteTip Mountain1 Fab2
       fabriquant: Topstar
       identifiant matériel: 0
       version: RVP7
       numéro de série: 1
       emplacement: Part Component
     *-firmware
          description: BIOS
          fabriquant: American Megatrends Inc.
          identifiant matériel: 0
          version: 5.11
          date: 11/06/2015
          taille: 64KiB
          capacité: 6080KiB
          fonctionnalités: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
     *-cache:0
          description: L1 cache
          identifiant matériel: 3d
          emplacement: L1 Cache
          taille: 64KiB
          capacité: 64KiB
          fonctionnalités: synchronous internal write-back data
          configuration: level=1
     *-cache:1
          description: L1 cache
          identifiant matériel: 3e
          emplacement: L1 Cache
          taille: 64KiB
          capacité: 64KiB
          fonctionnalités: synchronous internal write-back instruction
          configuration: level=1
     *-cache:2
          description: L2 cache
          identifiant matériel: 3f
          emplacement: L2 Cache
          taille: 512KiB
          capacité: 512KiB
          fonctionnalités: synchronous internal write-back unified
          configuration: level=2
     *-cache:3
          description: L3 cache
          identifiant matériel: 40
          emplacement: L3 Cache
          taille: 4MiB
          capacité: 4MiB
          fonctionnalités: synchronous internal write-back unified
          configuration: level=3
     *-cpu
          description: CPU
          produit: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz
          fabriquant: Intel Corp.
          identifiant matériel: 41
          information bus: cpu@0
          version: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz
          numéro de série: To Be Filled By O.E.M.
          emplacement: U3E1
          taille: 730MHz
          capacité: 4005MHz
          bits: 64 bits
          horloge: 100MHz
          fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fm...

Hello, I have the same issue with my laptop (very annoying).

I will try to upgrade to 18.04, see if it fixes, and, if not, try on s-breedveld solution.

$ sudo lshw 
[sudo] Mot de passe de alex : 
Désolé, essayez de nouveau.
[sudo] Mot de passe de alex : 
tignasse                    
    description: Ordinateur portable
    produit: Skylake Platform (System SKUNumber)
    fabriquant: Intel Corporation
    version: 0.1
    numéro de série: System Serial Number
    bits: 64 bits
    fonctionnalités: smbios-3.0 dmi-3.0 smp vsyscall32
    configuration: boot=normal chassis=laptop family=Skylake System sku=System SKUNumber uuid=00020003-0004-0005-0006-000700080009
  *-core
       description: Carte mère
       produit: WhiteTip Mountain1 Fab2
       fabriquant: Topstar
       identifiant matériel: 0
       version: RVP7
       numéro de série: 1
       emplacement: Part Component
     *-firmware
          description: BIOS
          fabriquant: American Megatrends Inc.
          identifiant matériel: 0
          version: 5.11
          date: 11/06/2015
          taille: 64KiB
          capacité: 6080KiB
          fonctionnalités: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
     *-cache:0
          description: L1 cache
          identifiant matériel: 3d
          emplacement: L1 Cache
          taille: 64KiB
          capacité: 64KiB
          fonctionnalités: synchronous internal write-back data
          configuration: level=1
     *-cache:1
          description: L1 cache
          identifiant matériel: 3e
          emplacement: L1 Cache
          taille: 64KiB
          capacité: 64KiB
          fonctionnalités: synchronous internal write-back instruction
          configuration: level=1
     *-cache:2
          description: L2 cache
          identifiant matériel: 3f
          emplacement: L2 Cache
          taille: 512KiB
          capacité: 512KiB
          fonctionnalités: synchronous internal write-back unified
          configuration: level=2
     *-cache:3
          description: L3 cache
          identifiant matériel: 40
          emplacement: L3 Cache
          taille: 4MiB
          capacité: 4MiB
          fonctionnalités: synchronous internal write-back unified
          configuration: level=3
     *-cpu
          description: CPU
          produit: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz
          fabriquant: Intel Corp.
          identifiant matériel: 41
          information bus: cpu@0
          version: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz
          numéro de série: To Be Filled By O.E.M.
          emplacement: U3E1
          taille: 730MHz
          capacité: 4005MHz
          bits: 64 bits
          horloge: 100MHz
          fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti retpoline intel_pt rsb_ctxsw spec_ctrl tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp cpufreq
          configuration: cores=2 enabledcores=2 threads=4
     *-memory
          description: Mémoire Système
          identifiant matériel: 42
          emplacement: Carte mère
          taille: 16GiB
        *-bank:0
             description: SODIMM DDR3 Synchrone 1600 MHz (0,6 ns)
             produit: CT204864BF160B.M16
             fabriquant: Conexant (Rockwell)
             identifiant matériel: 0
             numéro de série: 22102813
             emplacement: ChannelA-DIMM0
             taille: 16GiB
             bits: 64 bits
             horloge: 1600MHz (0.6ns)
        *-bank:1
             description: Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2017-10-12 17:02+0000X-Generator: Launchpad (build 18474)Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2017-10-12 17:02+0000X-Generator: Launchpad (build 18474) [vide]
             identifiant matériel: 1
             emplacement: ChannelB-DIMM0
     *-pci
          description: Host bridge
          produit: Skylake Host Bridge/DRAM Registers
          fabriquant: Intel Corporation
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 08
          bits: 32 bits
          horloge: 33MHz
          configuration: driver=skl_uncore
          ressources: irq:0
        *-display
             description: VGA compatible controller
             produit: HD Graphics 520
             fabriquant: Intel Corporation
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             version: 07
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             ressources: irq:125 mémoire:de000000-deffffff mémoire:c0000000-cfffffff portE/S:f000(taille=64) mémoire:c0000-dffff
        *-usb
             description: USB controller
             produit: Sunrise Point-LP USB 3.0 xHCI Controller
             fabriquant: Intel Corporation
             identifiant matériel: 14
             information bus: pci@0000:00:14.0
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi xhci bus_master cap_list
             configuration: driver=xhci_hcd latency=0
             ressources: irq:123 mémoire:df110000-df11ffff
           *-usbhost:0
                produit: xHCI Host Controller
                fabriquant: Linux 4.13.0-39-generic xhci-hcd
                identifiant matériel: 0
                information bus: usb@1
                nom logique: usb1
                version: 4.13
                fonctionnalités: usb-2.00
                configuration: driver=hub slots=12 speed=480Mbit/s
           *-usbhost:1
                produit: xHCI Host Controller
                fabriquant: Linux 4.13.0-39-generic xhci-hcd
                identifiant matériel: 1
                information bus: usb@2
                nom logique: usb2
                version: 4.13
                fonctionnalités: usb-3.00
                configuration: driver=hub slots=6 speed=5000Mbit/s
        *-generic
             description: Signal processing controller
             produit: Sunrise Point-LP Thermal subsystem
             fabriquant: Intel Corporation
             identifiant matériel: 14.2
             information bus: pci@0000:00:14.2
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration: driver=intel_pch_thermal latency=0
             ressources: irq:18 mémoire:df12e000-df12efff
        *-communication
             description: Communication controller
             produit: Sunrise Point-LP CSME HECI #1
             fabriquant: Intel Corporation
             identifiant matériel: 16
             information bus: pci@0000:00:16.0
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration: driver=mei_me latency=0
             ressources: irq:126 mémoire:df12d000-df12dfff
        *-storage
             description: SATA controller
             produit: Sunrise Point-LP SATA Controller [AHCI mode]
             fabriquant: Intel Corporation
             identifiant matériel: 17
             information bus: pci@0000:00:17.0
             version: 21
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: storage msi pm ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             ressources: irq:124 mémoire:df128000-df129fff mémoire:df12c000-df12c0ff portE/S:f090(taille=8) portE/S:f080(taille=4) portE/S:f060(taille=32) mémoire:df12b000-df12b7ff
        *-pci
             description: PCI bridge
             produit: Sunrise Point-LP PCI Express Root Port #5
             fabriquant: Intel Corporation
             identifiant matériel: 1c
             information bus: pci@0000:00:1c.0
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:122 mémoire:df000000-df0fffff
           *-network
                description: Interface réseau sans fil
                produit: Wireless 3160
                fabriquant: Intel Corporation
                identifiant matériel: 0
                information bus: pci@0000:01:00.0
                nom logique: wlp1s0
                version: 83
                numéro de série: 78:0c:b8:67:31:8f
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
                configuration: broadcast=yes driver=iwlwifi driverversion=4.13.0-39-generic firmware=17.608620.0 ip=192.168.1.18 latency=0 link=yes multicast=yes wireless=IEEE 802.11
                ressources: irq:127 mémoire:df000000-df001fff
        *-isa
             description: ISA bridge
             produit: Sunrise Point-LP LPC Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1f
             information bus: pci@0000:00:1f.0
             version: 21
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: isa bus_master
             configuration: latency=0
        *-memory
             description: Memory controller
             produit: Sunrise Point-LP PMC
             fabriquant: Intel Corporation
             identifiant matériel: 1f.2
             information bus: pci@0000:00:1f.2
             version: 21
             bits: 32 bits
             horloge: 33MHz (30.3ns)
             fonctionnalités: bus_master
             configuration: driver=intel_pmc_core latency=0
             ressources: irq:0 mémoire:df124000-df127fff
        *-multimedia
             description: Audio device
             produit: Sunrise Point-LP HD Audio
             fabriquant: Intel Corporation
             identifiant matériel: 1f.3
             information bus: pci@0000:00:1f.3
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration: driver=snd_hda_intel latency=32
             ressources: irq:128 mémoire:df120000-df123fff mémoire:df100000-df10ffff
        *-serial NON-RÉCLAMÉ
             description: SMBus
             produit: Sunrise Point-LP SMBus
             fabriquant: Intel Corporation
             identifiant matériel: 1f.4
             information bus: pci@0000:00:1f.4
             version: 21
             bits: 64 bits
             horloge: 33MHz
             configuration: latency=0
             ressources: mémoire:df12a000-df12a0ff portE/S:f040(taille=32)
     *-scsi:0
          identifiant matériel: 1
          nom logique: scsi0
          fonctionnalités: emulated
        *-disk
             description: ATA Disk
             produit: HGST HTS545050A7
             identifiant matériel: 0.0.0
             information bus: scsi@0:0.0.0
             nom logique: /dev/sda
             version: A230
             numéro de série: RBF50A1N2WPK0P
             taille: 465GiB (500GB)
             fonctionnalités: partitioned partitioned:luks
             configuration: ansiversion=5 logicalsectorsize=512 sectorsize=4096
           *-volume
                description: Linux Unified Key Setup volume
                identifiant matériel: 0
                nom logique: /dev/sda
                numéro de série: 8ac00387-e1be-431c-a233-b5bf9bf9eb6d
                taille: 465GiB
                capacité: 465GiB
                bits: 256 bits
                fonctionnalités: encrypted luks initialized
                configuration: bits=256 cipher=aes filesystem=luks hash=sha256 mode=cbc-plain version=1
     *-scsi:1
          identifiant matériel: 2
          nom logique: scsi2
          fonctionnalités: emulated
        *-disk
             description: ATA Disk
             produit: BIWIN SSD
             identifiant matériel: 0.0.0
             information bus: scsi@2:0.0.0
             nom logique: /dev/sdb
             version: 6A
             numéro de série: 155202501109
             taille: 119GiB (128GB)
             fonctionnalités: partitioned partitioned:dos
             configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=c8d4e38e
           *-volume:0
                description: Volume EXT4
                fabriquant: Linux
                identifiant matériel: 1
                information bus: scsi@2:0.0.0,1
                nom logique: /dev/sdb1
                nom logique: /
                version: 1.0
                numéro de série: 6814e3c1-8cea-4ecc-964d-535fd18782e9
                taille: 115GiB
                capacité: 115GiB
                fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
                configuration: created=2015-11-10 21:09:43 filesystem=ext4 lastmountpoint=/ modified=2018-05-01 12:08:23 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,stripe=32733,data=ordered mounted=2018-05-01 12:08:24 state=mounted
           *-volume:1
                description: Linux swap volume
                identifiant matériel: 2
                information bus: scsi@2:0.0.0,2
                nom logique: /dev/sdb2
                version: 1
                numéro de série: 870c2fd1-8a8f-49bb-9bf4-dbefaa08e583
                taille: 4GiB
                capacité: 4GiB
                fonctionnalités: primary nofs swap initialized
                configuration: filesystem=swap pagesize=4096
  *-power NON-RÉCLAMÉ
       description: To Be Filled By O.E.M.
       produit: To Be Filled By O.E.M.
       fabriquant: To Be Filled By O.E.M.
       identifiant matériel: 1
       version: To Be Filled By O.E.M.
       numéro de série: To Be Filled By O.E.M.
       capacité: 32768mWh
  *-network:0
       description: Ethernet interface
       identifiant matériel: 2
       nom logique: vethUFSNYA
       numéro de série: fe:f1:93:74:2a:5c
       taille: 10Gbit/s
       fonctionnalités: ethernet physical
       configuration: autonegotiation=off broadcast=yes driver=veth driverversion=1.0 duplex=full link=yes multicast=yes port=twisted pair speed=10Gbit/s
  *-network:1
       description: Ethernet interface
       identifiant matériel: 3
       nom logique: lxcbr0
       numéro de série: 00:16:3e:00:00:00
       fonctionnalités: ethernet physical
       configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A ip=10.0.3.1 link=yes multicast=yes

$ lsb_release -a
LSB Version:	core-9.20160110ubuntu5-amd64:core-9.20160110ubuntu5-noarch:printing-9.20160110ubuntu5-amd64:printing-9.20160110ubuntu5-noarch:security-9.20160110ubuntu5-amd64:security-9.20160110ubuntu5-noarch
Distributor ID:	Ubuntu
Description:	Ubuntu 17.10
Release:	17.10
Codename:	artful

$ uname -a
Linux tignasse 4.13.0-39-generic #44-Ubuntu SMP Thu Apr 5 14:25:01 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

$ grep 10:33 /var/log/syslog |grep xhci
May  2 10:33:23 tignasse kernel: [80701.919440] usb 1-6: new low-speed USB device number 16 using xhci_hcd
May  2 10:33:23 tignasse kernel: [80702.495454] usb 1-6: new low-speed USB device number 17 using xhci_hcd
May  2 10:33:24 tignasse kernel: [80703.071459] usb 1-6: new low-speed USB device number 18 using xhci_hcd
May  2 10:33:24 tignasse kernel: [80703.607474] usb 1-6: new low-speed USB device number 19 using xhci_hcd
May  2 10:33:33 tignasse kernel: [80712.047723] xhci_hcd 0000:00:14.0: Cannot set link state.
May  2 10:33:33 tignasse kernel: [80712.523751] usb 1-2: new high-speed USB device number 20 using xhci_hcd
May  2 10:33:34 tignasse kernel: [80713.219892] usb 2-2: new SuperSpeed USB device number 8 using xhci_hcd
May  2 10:33:34 tignasse kernel: [80713.423772] usb 1-2.3: new high-speed USB device number 21 using xhci_hcd
May  2 10:33:39 tignasse kernel: [80718.715876] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command.
May  2 10:33:39 tignasse kernel: [80718.715881] xhci_hcd 0000:00:14.0: xHCI host controller not responding, assume dead
May  2 10:33:39 tignasse kernel: [80718.715908] xhci_hcd 0000:00:14.0: HC died; cleaning up
May  2 10:33:39 tignasse kernel: [80718.715923] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command

Revision history for this message

bp0 (bullet-proof-0) wrote on 2018-05-09:

#30

The workaround in comment #26 works for me on a Lenovo Yoga 720-15 running kernel 4.17.0-041700rc3-generic.

Revision history for this message

Alex Garel (alex-garel) wrote on 2018-05-09:

#31

Just upgrading to 18.04 seems to fix the problem for me !

$ uname -a
Linux tignasse 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

$ lsb_release -a
LSB Version: core-9.20170808ubuntu1-noarch:printing-9.20170808ubuntu1-noarch:security-9.20170808ubuntu1-noarch
Distributor ID: Ubuntu
Description: Ubuntu 18.04 LTS
Release: 18.04
Codename: bionic

Revision history for this message

Erik Kallen (erikkallen) wrote on 2018-05-12:

#32

Upgrading to 18.04 seems has made this bug appear for me.
I have tried updating to the latest kernel but that did not help.

$ uname -a

Linux erikkallen-laptop 4.17.0-041700rc4-generic #201805070430 SMP Mon May 7 04:31:46 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

$ lsb_release -a

No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 18.04 LTS
Release: 18.04
Codename: bionic

Revision history for this message

Sebastiaan Breedveld (s-breedveld) wrote on 2018-05-17:

#33

@info-erikkallen : did you try the solution proposed in post #26 ?

Revision history for this message

Volodymyr Shymanskyi (vshymanskyi) wrote on 2018-05-23:

#34

Lenovo IdeaPad 720s (i5-8250U), the same issue.

On resume, I get:
[ 213.347656] usb 1-7: device descriptor read/64, error -110

➜ ~ lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
    |__ Port 2: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
    |__ Port 5: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M
    |__ Port 5: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M
    |__ Port 6: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 12M
    |__ Port 7: Dev 5, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 7: Dev 5, If 1, Class=Wireless, Driver=btusb, 12M

This way, i was getting my BT adapter disconnected.
But also I was experiencing a USB3 flash drive reconnecting unexpectedly during normal operation (no sleep/resume).

'pci=nomsi iommu=soft' helped, at least for now.

➜ ~ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 18.04 LTS
Release: 18.04
Codename: bionic
➜ ~ uname -a
Linux vshymanskyy-720S 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

Revision history for this message

Volodymyr Shymanskyi (vshymanskyi) wrote on 2018-05-23:

#35

OK, still saw it at least once after applying 'pci=nomsi iommu=soft'.
But in general, it is much much better ;)

Revision history for this message

Sebastiaan Breedveld (s-breedveld) wrote on 2018-05-23:

#36

@vshymanskyi: did you fully restart after adding these options to GRUB? I.e. not boot, add to GRUB, hibernate, boot again and resume. The system really needs to boot with these options prior to the first hibernate.

Another option you can try: intel_iommu=off (or perhaps amd_iommu=off, depending on your chipset).

Revision history for this message

Volodymyr Shymanskyi (vshymanskyi) wrote on 2018-05-24:

#37

@s-breedveld thanks. I'm absolutely sure as:

➜ ~ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.15.0-22-generic root=UUID=69ba76e3-5381-4011-99c1-195ad0e6d288 ro quiet splash pci=nomsi iommu=soft vt.handoff=1

I'll try intel_iommu=off. As I said, Intel i5-8250U.

Revision history for this message

Volodymyr Shymanskyi (vshymanskyi) wrote on 2018-05-24:

#38

Happened again :(

When this happens:

[10006.322991] ACPI: Waking up from system sleep state S3
[10006.433962] ACPI: EC: event unblocked
[10006.441688] ACPI: button: The lid device is not compliant to SW_LID.
[10006.670082] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[10006.946396] usb 1-5: reset high-speed USB device number 2 using xhci_hcd
[10007.222532] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
[10007.830663] [drm] RC6 on
??? [10011.663755] ideapad_laptop: Unknown event: 10
>>> [10012.502311] usb 1-7: device descriptor read/64, error -110
??? [10016.568097] OOM killer enabled.
[10016.568098] Restarting tasks ... done.
[10016.625870] PM: suspend exit
[10016.636823] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
>>> [10016.885790] usb 1-7: USB disconnect, device number 4
[10017.400431] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809
[10017.403476] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118
[10017.419240] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[10017.485763] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[10026.334678] xhci_hcd 0000:00:14.0: Secondary root hub is not suspended
[10026.402269] xhci_hcd 0000:00:14.0: Root hub is not suspended

➜ ~ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.15.0-22-generic root=UUID=69ba76e3-5381-4011-99c1-195ad0e6d288 ro quiet splash pci=nomsi iommu=soft intel_iommu=off vt.handoff=1

Revision history for this message

Sebastiaan Breedveld (s-breedveld) wrote on 2018-05-25:

#39

Hmm, that's outright annoying. Do you resume from hibernate or from suspend?

I can only think of 2 other options to try:
- upgrade to a newer kernel (or even try downgrading - see what that does):
http://kernel.ubuntu.com/~kernel-ppa/mainline/

- use software suspend (uswsusp package). Configuring can be a bit tricky though, as the system suspend/hibernate commands are not automatically adjusted, so invoke hibernate manually by s2disk .

Revision history for this message

Mark van Beek (mark-appelit) wrote on 2018-05-26:

#40

There are a few variations on the "USB stops working after a while" bug(s), I have come across one on a (newly bought) desktop machine that tells me "xHCI host controller not responding, assume dead". The only fix I found is turning of autosuspend for USB completely.

While searching I found this message on the kernel usb mailinglist: https://www.spinics.net/lists/linux-usb/msg168676.html, though my bug might not actually be related to this one, I thought I'd point to the patch since it might be the fix for this issue as well.

Revision history for this message

Martin Dünkelmann (nc-duenkekl3-deactivatedaccount) wrote on 2018-06-23:

#41

Download full text (123.1 KiB)

Kernel 4.15
Linux Mint 19 / Ubuntu 18.04
ThinkPad 460p
I locked my laptop, after a while, I unlocked it.
USB dead.

[ 0.000000] Linux version 4.15.0-23-generic (buildd@lgw01-amd64-055) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #25-Ubuntu SMP Wed May 23 18:02:16 UTC 2018 (Ubuntu 4.15.0-23.25-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=e0c22f5c-524e-413d-a972-b04e72fcc526 ro quiet splash nopti vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a33fbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a33fc000-0x00000000a33fcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a33fd000-0x00000000a3446fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a3447000-0x00000000ad61bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ad61c000-0x00000000ad66bfff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000ad66c000-0x00000000afeadfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000afeae000-0x00000000affadfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000affae000-0x00000000afffdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000afffe000-0x00000000afffefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000affff000-0x00000000b7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b8600000-0x00000000bc7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000008417fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by Lenovo
[ 0.000000] efi: SMBIOS=0xaef68000 ACPI=0xafffd000 ACPI 2.0=0xafffd014 ESRT=0xaeddd000
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] ...

Kernel 4.15
Linux Mint 19 / Ubuntu 18.04
ThinkPad 460p
I locked my laptop, after a while, I unlocked it.
USB dead.

[    0.000000] Linux version 4.15.0-23-generic (buildd@lgw01-amd64-055) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #25-Ubuntu SMP Wed May 23 18:02:16 UTC 2018 (Ubuntu 4.15.0-23.25-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=e0c22f5c-524e-413d-a972-b04e72fcc526 ro quiet splash nopti vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a33fbfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a33fc000-0x00000000a33fcfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000a33fd000-0x00000000a3446fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a3447000-0x00000000ad61bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ad61c000-0x00000000ad66bfff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000ad66c000-0x00000000afeadfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000afeae000-0x00000000affadfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000affae000-0x00000000afffdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000afffe000-0x00000000afffefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000affff000-0x00000000b7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b8600000-0x00000000bc7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000008417fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by Lenovo
[    0.000000] efi:  SMBIOS=0xaef68000  ACPI=0xafffd000  ACPI 2.0=0xafffd014  ESRT=0xaeddd000 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: LENOVO 20FXS05500/20FXS05500, BIOS R07ET84W (2.24 ) 06/05/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x841800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00BC000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 00BA000000 mask 7FFE000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xaffff max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000aeddd000 to 0x00000000aeddd088.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] Kernel/User page tables isolation: disabled on command line.
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x3d093f000, 0x3d093ffff] PGTABLE
[    0.000000] BRK [0x3d0940000, 0x3d0940fff] PGTABLE
[    0.000000] BRK [0x3d0941000, 0x3d0941fff] PGTABLE
[    0.000000] BRK [0x3d0942000, 0x3d0942fff] PGTABLE
[    0.000000] BRK [0x3d0943000, 0x3d0943fff] PGTABLE
[    0.000000] BRK [0x3d0944000, 0x3d0944fff] PGTABLE
[    0.000000] BRK [0x3d0945000, 0x3d0945fff] PGTABLE
[    0.000000] BRK [0x3d0946000, 0x3d0946fff] PGTABLE
[    0.000000] BRK [0x3d0947000, 0x3d0947fff] PGTABLE
[    0.000000] BRK [0x3d0948000, 0x3d0948fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3131d000-0x34985fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000AFFFD014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000AFFD1188 0000FC (v01 LENOVO TP-R07   00000000 PTEC 00000002)
[    0.000000] ACPI: FACP 0x00000000AFFF1000 0000F4 (v05 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: DSDT 0x00000000AFFDC000 010D9A (v02 LENOVO TP-R07   00002240 INTL 20141107)
[    0.000000] ACPI: FACS 0x00000000AFF67000 000040
[    0.000000] ACPI: TCPA 0x00000000AFFFB000 000032 (v02 LENOVO TP-R07   00000002 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000AFFFA000 0004B7 (v02 LENOVO Tpm2Tabl 00001000 INTL 20141107)
[    0.000000] ACPI: SSDT 0x00000000AFFF9000 00004B (v02 LENOVO MeSsdt   00003000 INTL 20141107)
[    0.000000] ACPI: TPM2 0x00000000AFFF8000 000034 (v03 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: UEFI 0x00000000AFF7E000 000042 (v01 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000AFFF3000 004D97 (v02 LENOVO SaSsdt   00003000 INTL 20141107)
[    0.000000] ACPI: SSDT 0x00000000AFFF2000 0005C5 (v02 LENOVO PerfTune 00001000 INTL 20141107)
[    0.000000] ACPI: ECDT 0x00000000AFFF0000 000052 (v01 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: HPET 0x00000000AFFEF000 000038 (v01 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: APIC 0x00000000AFFEE000 0000BC (v03 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: MCFG 0x00000000AFFED000 00003C (v01 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000AFFDA000 0018D2 (v01 LENOVO SataAhci 00001000 INTL 20141107)
[    0.000000] ACPI: DBGP 0x00000000AFFD9000 000034 (v01 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: DBG2 0x00000000AFFD8000 000054 (v00 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: BOOT 0x00000000AFFD7000 000028 (v01 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: BATB 0x00000000AFFD6000 00004A (v02 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000AFFD5000 000649 (v02 LENOVO Cpu0Ist  00003000 INTL 20141107)
[    0.000000] ACPI: SSDT 0x00000000AFFD4000 000E73 (v02 LENOVO CpuSsdt  00003000 INTL 20141107)
[    0.000000] ACPI: SSDT 0x00000000AFFD3000 0003D9 (v02 LENOVO CtdpB    00001000 INTL 20141107)
[    0.000000] ACPI: POAT 0x00000000AFFD2000 000055 (v03 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000AFFCF000 001005 (v01 LENOVO NvOptTbl 00001000 INTL 20141107)
[    0.000000] ACPI: SSDT 0x00000000AFFFC000 000732 (v02 LENOVO SgPch    00001000 INTL 20141107)
[    0.000000] ACPI: DMAR 0x00000000AFFCE000 0000A8 (v01 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: ASF! 0x00000000AFFCD000 0000A5 (v32 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: FPDT 0x00000000AFFCC000 000044 (v01 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: UEFI 0x00000000AFF44000 00013E (v01 LENOVO TP-R07   00002240 PTEC 00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000008417fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x8417d5000-0x8417fffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000008417fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000a33fbfff]
[    0.000000]   node   0: [mem 0x00000000a3447000-0x00000000ad61bfff]
[    0.000000]   node   0: [mem 0x00000000afffe000-0x00000000afffefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000008417fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000008417fffff]
[    0.000000] On node 0 totalpages: 8318317
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11032 pages used for memmap
[    0.000000]   DMA32 zone: 706002 pages, LIFO batch:31
[    0.000000]   Normal zone: 118880 pages used for memmap
[    0.000000]   Normal zone: 7608320 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 99 pages
[    0.000000] Reserving Intel graphics memory at 0x00000000ba800000-0x00000000bc7fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa33fc000-0xa33fcfff]
[    0.000000] PM: Registered nosave memory: [mem 0xa33fd000-0xa3446fff]
[    0.000000] PM: Registered nosave memory: [mem 0xad61c000-0xad66bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xad66c000-0xafeadfff]
[    0.000000] PM: Registered nosave memory: [mem 0xafeae000-0xaffadfff]
[    0.000000] PM: Registered nosave memory: [mem 0xaffae000-0xafffdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xaffff000-0xb7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb8000000-0xb85fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb8600000-0xbc7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc800000-0xf80f9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fa000-0xf80fafff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fe000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
[    0.000000] e820: [mem 0xbc800000-0xf80f9fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8188319
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=e0c22f5c-524e-413d-a972-b04e72fcc526 ro quiet splash nopti vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 32505076K/33273268K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2408K init, 2416K bss, 768192K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 39083 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.004000] APIC: Switch to symmetric I/O mode setup
[    0.004000] DMAR: Host address width 39
[    0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.004000] DMAR: RMRR base: 0x000000af42f000 end: 0x000000af44efff
[    0.004000] DMAR: RMRR base: 0x000000ba000000 end: 0x000000bc7fffff
[    0.004000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.004000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.004000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.004000] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.004000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.028000] tsc: Detected 2600.000 MHz processor
[    0.028000] tsc: Detected 2592.000 MHz TSC
[    0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5184.00 BogoMIPS (lpj=10368000)
[    0.028000] pid_max: default: 32768 minimum: 301
[    0.028000] Security Framework initialized
[    0.028000] Yama: becoming mindful.
[    0.028000] AppArmor: AppArmor initialized
[    0.028000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.033489] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.033548] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.033600] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.033770] CPU: Physical Processor ID: 0
[    0.033771] CPU: Processor Core ID: 0
[    0.033775] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.033775] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.033779] mce: CPU supports 10 MCE banks
[    0.033786] CPU0: Thermal monitoring enabled (TM1)
[    0.033800] process: using mwait in idle threads
[    0.033802] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.033803] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.033804] Spectre V2 : Mitigation: Full generic retpoline
[    0.033805] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.033805] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.033805] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.033806] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.034043] Freeing SMP alternatives memory: 36K
[    0.037931] TSC deadline timer enabled
[    0.037936] smpboot: CPU0: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.037983] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.038008] ... version:                4
[    0.038008] ... bit width:              48
[    0.038009] ... generic registers:      4
[    0.038009] ... value mask:             0000ffffffffffff
[    0.038010] ... max period:             00007fffffffffff
[    0.038010] ... fixed-purpose events:   3
[    0.038010] ... event mask:             000000070000000f
[    0.038038] Hierarchical SRCU implementation.
[    0.038868] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.038877] smp: Bringing up secondary CPUs ...
[    0.038923] x86: Booting SMP configuration:
[    0.038924] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.040267] smp: Brought up 1 node, 8 CPUs
[    0.040267] smpboot: Max logical packages: 1
[    0.040267] smpboot: Total of 8 processors activated (41472.00 BogoMIPS)
[    0.044598] devtmpfs: initialized
[    0.044598] x86/mm: Memory block size: 128MB
[    0.045922] evm: security.selinux
[    0.045922] evm: security.SMACK64
[    0.045922] evm: security.SMACK64EXEC
[    0.045923] evm: security.SMACK64TRANSMUTE
[    0.045923] evm: security.SMACK64MMAP
[    0.045923] evm: security.apparmor
[    0.045924] evm: security.ima
[    0.045924] evm: security.capability
[    0.045934] PM: Registering ACPI NVS region [mem 0xa33fc000-0xa33fcfff] (4096 bytes)
[    0.045934] PM: Registering ACPI NVS region [mem 0xafeae000-0xaffadfff] (1048576 bytes)
[    0.045934] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.045934] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.045934] pinctrl core: initialized pinctrl subsystem
[    0.045934] RTC time: 19:35:16, date: 06/21/18
[    0.045934] NET: Registered protocol family 16
[    0.045934] audit: initializing netlink subsys (disabled)
[    0.045934] audit: type=2000 audit(1529609716.044:1): state=initialized audit_enabled=0 res=1
[    0.048027] cpuidle: using governor ladder
[    0.048027] cpuidle: using governor menu
[    0.048076] Simple Boot Flag at 0x47 set to 0x1
[    0.048097] ACPI: bus type PCI registered
[    0.048098] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.052022] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.052030] PCI: not using MMCONFIG
[    0.052030] PCI: Using configuration type 1 for base access
[    0.053209] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.053209] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.053209] ACPI: Added _OSI(Module Device)
[    0.053209] ACPI: Added _OSI(Processor Device)
[    0.053209] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.053209] ACPI: Added _OSI(Processor Aggregator Device)
[    0.053209] ACPI: EC: EC started
[    0.053209] ACPI: EC: interrupt blocked
[    0.053422] ACPI: \: Used as first EC
[    0.053424] ACPI: \: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.053425] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.062144] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.068587] ACPI: Dynamic OEM Table Load:
[    0.068587] ACPI: SSDT 0xFFFF98C2DD1BF000 000649 (v02 PmRef  Cpu0Ist  00003000 INTL 20141107)
[    0.068587] ACPI Error: [_PPC] Namespace lookup failure, AE_ALREADY_EXISTS (20170831/dswload-378)
[    0.068587] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20170831/psobject-252)
[    0.068587] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.068900] ACPI: Dynamic OEM Table Load:
[    0.068906] ACPI: SSDT 0xFFFF98C2DCCB8400 0003CF (v02 PmRef  Cpu0Cst  00003001 INTL 20141107)
[    0.069223] ACPI: Dynamic OEM Table Load:
[    0.069229] ACPI: SSDT 0xFFFF98C2DCCCC6C0 00008E (v02 PmRef  Cpu0Hwp  00003000 INTL 20141107)
[    0.069475] ACPI: Dynamic OEM Table Load:
[    0.069480] ACPI: SSDT 0xFFFF98C2DCCE5E00 000130 (v02 PmRef  HwpLvt   00003000 INTL 20141107)
[    0.069654] ACPI: Dynamic OEM Table Load:
[    0.069654] ACPI: SSDT 0xFFFF98C2DD0A8800 0005AA (v02 PmRef  ApIst    00003000 INTL 20141107)
[    0.069654] ACPI: Dynamic OEM Table Load:
[    0.069654] ACPI: SSDT 0xFFFF98C2DCE15800 000119 (v02 PmRef  ApHwp    00003000 INTL 20141107)
[    0.072153] ACPI: Dynamic OEM Table Load:
[    0.072159] ACPI: SSDT 0xFFFF98C2DCE18600 000119 (v02 PmRef  ApCst    00003000 INTL 20141107)
[    0.072340] ACPI: Interpreter enabled
[    0.072347] ACPI: (supports S0 S3 S4 S5)
[    0.072348] ACPI: Using IOAPIC for interrupt routing
[    0.072377] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.072698] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.072704] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.072934] ACPI: Enabled 5 GPEs in block 00 to 7F
[    0.076279] ACPI: Power Resource [PUBS] (on)
[    0.077394] ACPI: Power Resource [PG00] (on)
[    0.077507] ACPI: Power Resource [PG01] (on)
[    0.077619] ACPI: Power Resource [PG02] (on)
[    0.086646] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.086759] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11)
[    0.086871] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.086982] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.087093] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.088112] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[    0.088215] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.088328] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.088426] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-80])
[    0.088430] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.088534] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.088581] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.088583] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.088584] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.088585] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.088608] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.089352] PCI host bridge to bus 0000:00
[    0.089354] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.089355] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.089356] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.089357] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.089358] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.089359] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.089360] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.089361] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.089362] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.089363] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.089363] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.089364] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.089365] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.089366] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.089367] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.089368] pci_bus 0000:00: root bus resource [mem 0xbc800000-0xfebfffff window]
[    0.089369] pci_bus 0000:00: root bus resource [bus 00-80]
[    0.089376] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
[    0.089697] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.089733] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.090078] pci 0000:00:01.2: [8086:1909] type 01 class 0x060400
[    0.090111] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.090467] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
[    0.090475] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf2ffffff 64bit]
[    0.090480] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.090484] pci 0000:00:02.0: reg 0x20: [io  0xe000-0xe03f]
[    0.090496] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.090874] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.090894] pci 0000:00:14.0: reg 0x10: [mem 0xf4220000-0xf422ffff 64bit]
[    0.090956] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.091261] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.091279] pci 0000:00:14.2: reg 0x10: [mem 0xf424a000-0xf424afff 64bit]
[    0.091650] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.091674] pci 0000:00:16.0: reg 0x10: [mem 0xf424b000-0xf424bfff 64bit]
[    0.091745] pci 0000:00:16.0: PME# supported from D3hot
[    0.092101] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[    0.092116] pci 0000:00:17.0: reg 0x10: [mem 0xf4248000-0xf4249fff]
[    0.092122] pci 0000:00:17.0: reg 0x14: [mem 0xf424e000-0xf424e0ff]
[    0.092128] pci 0000:00:17.0: reg 0x18: [io  0xe080-0xe087]
[    0.092134] pci 0000:00:17.0: reg 0x1c: [io  0xe088-0xe08b]
[    0.092140] pci 0000:00:17.0: reg 0x20: [io  0xe060-0xe07f]
[    0.092147] pci 0000:00:17.0: reg 0x24: [mem 0xf424c000-0xf424c7ff]
[    0.092185] pci 0000:00:17.0: PME# supported from D3hot
[    0.092532] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[    0.092609] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.092983] pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
[    0.093054] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.093420] pci 0000:00:1f.0: [8086:a14d] type 00 class 0x060100
[    0.093851] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.093864] pci 0000:00:1f.2: reg 0x10: [mem 0xf4244000-0xf4247fff]
[    0.094232] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.094258] pci 0000:00:1f.3: reg 0x10: [mem 0xf4240000-0xf4243fff 64bit]
[    0.094287] pci 0000:00:1f.3: reg 0x20: [mem 0xf4230000-0xf423ffff 64bit]
[    0.094336] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.094676] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.094729] pci 0000:00:1f.4: reg 0x10: [mem 0xf424d000-0xf424d0ff 64bit]
[    0.094778] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.095173] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
[    0.095199] pci 0000:00:1f.6: reg 0x10: [mem 0xf4200000-0xf421ffff]
[    0.095307] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.095663] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.095713] pci 0000:02:00.0: [10de:134d] type 00 class 0x030200
[    0.095736] pci 0000:02:00.0: reg 0x10: [mem 0xf3000000-0xf3ffffff]
[    0.095750] pci 0000:02:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.095763] pci 0000:02:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.095771] pci 0000:02:00.0: reg 0x24: [io  0xd000-0xd07f]
[    0.095780] pci 0000:02:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.104040] pci 0000:00:01.2: PCI bridge to [bus 02]
[    0.104047] pci 0000:00:01.2:   bridge window [io  0xd000-0xdfff]
[    0.104053] pci 0000:00:01.2:   bridge window [mem 0xf3000000-0xf3ffffff]
[    0.104062] pci 0000:00:01.2:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.104511] pci 0000:03:00.0: [8086:24f3] type 00 class 0x028000
[    0.104604] pci 0000:03:00.0: reg 0x10: [mem 0xf4100000-0xf4101fff 64bit]
[    0.104933] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.116623] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.116627] pci 0000:00:1c.0:   bridge window [mem 0xf4100000-0xf41fffff]
[    0.116762] pci 0000:04:00.0: [10ec:522a] type 00 class 0xff0000
[    0.116791] pci 0000:04:00.0: reg 0x10: [mem 0xf4000000-0xf4000fff]
[    0.116972] pci 0000:04:00.0: supports D1 D2
[    0.116974] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.128139] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.128143] pci 0000:00:1c.4:   bridge window [mem 0xf4000000-0xf40fffff]
[    0.129612] ACPI: EC: interrupt unblocked
[    0.129634] ACPI: EC: event unblocked
[    0.129645] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.129646] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[    0.129821] SCSI subsystem initialized
[    0.129833] libata version 3.00 loaded.
[    0.129833] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[    0.129833] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.129833] pci 0000:00:02.0: vgaarb: setting as boot device
[    0.129833] vgaarb: loaded
[    0.129833] ACPI: bus type USB registered
[    0.129833] usbcore: registered new interface driver usbfs
[    0.129833] usbcore: registered new interface driver hub
[    0.129833] usbcore: registered new device driver usb
[    0.129833] EDAC MC: Ver: 3.0.0
[    0.129833] Registered efivars operations
[    0.163512] PCI: Using ACPI for IRQ routing
[    0.170126] PCI: pci_cache_line_size set to 64 bytes
[    0.170849] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.170850] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.170851] e820: reserve RAM buffer [mem 0xa33fc000-0xa3ffffff]
[    0.170851] e820: reserve RAM buffer [mem 0xad61c000-0xafffffff]
[    0.170852] e820: reserve RAM buffer [mem 0xaffff000-0xafffffff]
[    0.170853] e820: reserve RAM buffer [mem 0x841800000-0x843ffffff]
[    0.170913] NetLabel: Initializing
[    0.170914] NetLabel:  domain hash size = 128
[    0.170914] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.170924] NetLabel:  unlabeled traffic allowed by default
[    0.170932] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.170932] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.173031] clocksource: Switched to clocksource hpet
[    0.180490] VFS: Disk quotas dquot_6.6.0
[    0.180500] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.180581] AppArmor: AppArmor Filesystem Enabled
[    0.180596] pnp: PnP ACPI init
[    0.181026] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.181027] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.181029] system 00:00: [mem 0x00100000-0xbc7fffff] could not be reserved
[    0.181030] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.181031] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.181035] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.181091] system 00:01: [io  0x1800-0x189f] has been reserved
[    0.181092] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.181094] system 00:01: [io  0x0880-0x08ff] has been reserved
[    0.181095] system 00:01: [io  0x0900-0x097f] has been reserved
[    0.181096] system 00:01: [io  0x0980-0x09ff] has been reserved
[    0.181097] system 00:01: [io  0x0a00-0x0a7f] has been reserved
[    0.181098] system 00:01: [io  0x0a80-0x0aff] has been reserved
[    0.181099] system 00:01: [io  0x0b00-0x0b7f] has been reserved
[    0.181101] system 00:01: [io  0x0b80-0x0bff] has been reserved
[    0.181102] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.181103] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.181104] system 00:01: [io  0x1640-0x165f] has been reserved
[    0.181106] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.181107] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.181108] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.181109] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.181110] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
[    0.181113] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.181171] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.181191] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[    0.181205] pnp 00:04: Plug and Play ACPI device, IDs LEN2018 PNP0f13 (active)
[    0.181760] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.181762] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.181763] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.181764] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.181766] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.181767] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.181768] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.181772] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.182053] system 00:06: [io  0xff00-0xfffe] has been reserved
[    0.182055] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.182136] pnp: PnP ACPI: found 7 devices
[    0.190848] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.190851] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.190881] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.190888] pci 0000:02:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.190889] pci 0000:02:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.190890] pci 0000:00:01.2: PCI bridge to [bus 02]
[    0.190892] pci 0000:00:01.2:   bridge window [io  0xd000-0xdfff]
[    0.190894] pci 0000:00:01.2:   bridge window [mem 0xf3000000-0xf3ffffff]
[    0.190896] pci 0000:00:01.2:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.190899] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.190913] pci 0000:00:1c.0:   bridge window [mem 0xf4100000-0xf41fffff]
[    0.190918] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.190921] pci 0000:00:1c.4:   bridge window [mem 0xf4000000-0xf40fffff]
[    0.190927] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.190928] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.190929] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.190930] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.190931] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.190932] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.190933] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.190934] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.190935] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.190936] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.190937] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.190938] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.190939] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.190940] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.190941] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.190942] pci_bus 0000:00: resource 19 [mem 0xbc800000-0xfebfffff window]
[    0.190943] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.190944] pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf3ffffff]
[    0.190945] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.190946] pci_bus 0000:03: resource 1 [mem 0xf4100000-0xf41fffff]
[    0.190948] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf40fffff]
[    0.191041] NET: Registered protocol family 2
[    0.191214] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.191454] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.191537] TCP: Hash tables configured (established 262144 bind 65536)
[    0.191572] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[    0.191632] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[    0.191705] NET: Registered protocol family 1
[    0.191715] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.192304] PCI: CLS 0 bytes, default 64
[    0.192341] Unpacking initramfs...
[    0.867697] Freeing initrd memory: 55716K
[    0.867743] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.867745] software IO TLB [mem 0xa8cda000-0xaccda000] (64MB) mapped at [000000003421d8a0-0000000042e7d0dd]
[    0.867803] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
[    0.867806] caller snb_uncore_imc_init_box+0x6c/0xb0 mapping multiple BARs
[    0.868179] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns
[    0.868487] Scanning for low memory corruption every 60 seconds
[    0.869181] Initialise system trusted keyrings
[    0.869187] Key type blacklist registered
[    0.869297] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[    0.870166] zbud: loaded
[    0.870583] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.870752] fuse init (API version 7.26)
[    0.874094] Key type asymmetric registered
[    0.874094] Asymmetric key parser 'x509' registered
[    0.874138] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.874194] io scheduler noop registered
[    0.874195] io scheduler deadline registered
[    0.874237] io scheduler cfq registered (default)
[    0.875047] efifb: probing for efifb
[    0.875053] efifb: framebuffer at 0xc0000000, using 1216k, total 1216k
[    0.875054] efifb: mode is 640x480x32, linelength=2560, pages=1
[    0.875054] efifb: scrolling: redraw
[    0.875055] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.875175] Console: switching to colour frame buffer device 80x30
[    0.875194] fb0: EFI VGA frame buffer device
[    0.875200] intel_idle: MWAIT substates: 0x11142120
[    0.875201] intel_idle: v0.4.1 model 0x5E
[    0.875720] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.875952] ACPI: AC Adapter [AC] (on-line)
[    0.875990] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.876079] ACPI: Lid Switch [LID]
[    0.876100] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.876154] ACPI: Sleep Button [SLPB]
[    0.876181] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.876237] ACPI: Power Button [PWRF]
[    0.876274] ACPI Error: [CPC1] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    0.876280] No Local Variables are initialized for Method [_CPC]
[    0.876281] No Arguments are initialized for method [_CPC]
[    0.876283] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20170831/psparse-550)
[    0.876376] ACPI Error: [CPC1] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    0.876380] No Local Variables are initialized for Method [_CPC]
[    0.876381] No Arguments are initialized for method [_CPC]
[    0.876382] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20170831/psparse-550)
[    0.876386] ACPI Error: Method parse/execution failed \_PR.CPU1._CPC, AE_NOT_FOUND (20170831/psparse-550)
[    0.876448] ACPI Error: [CPC1] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    0.876452] No Local Variables are initialized for Method [_CPC]
[    0.876453] No Arguments are initialized for method [_CPC]
[    0.876454] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20170831/psparse-550)
[    0.876458] ACPI Error: Method parse/execution failed \_PR.CPU2._CPC, AE_NOT_FOUND (20170831/psparse-550)
[    0.876546] ACPI Error: [CPC1] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    0.876550] No Local Variables are initialized for Method [_CPC]
[    0.876551] No Arguments are initialized for method [_CPC]
[    0.876552] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20170831/psparse-550)
[    0.876556] ACPI Error: Method parse/execution failed \_PR.CPU3._CPC, AE_NOT_FOUND (20170831/psparse-550)
[    0.876640] ACPI Error: [CPC1] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    0.876644] No Local Variables are initialized for Method [_CPC]
[    0.876645] No Arguments are initialized for method [_CPC]
[    0.876646] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20170831/psparse-550)
[    0.876650] ACPI Error: Method parse/execution failed \_PR.CPU4._CPC, AE_NOT_FOUND (20170831/psparse-550)
[    0.876735] ACPI Error: [CPC1] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    0.876739] No Local Variables are initialized for Method [_CPC]
[    0.876740] No Arguments are initialized for method [_CPC]
[    0.876741] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20170831/psparse-550)
[    0.876745] ACPI Error: Method parse/execution failed \_PR.CPU5._CPC, AE_NOT_FOUND (20170831/psparse-550)
[    0.876841] ACPI Error: [CPC1] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    0.876845] No Local Variables are initialized for Method [_CPC]
[    0.876846] No Arguments are initialized for method [_CPC]
[    0.876847] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20170831/psparse-550)
[    0.876850] ACPI Error: Method parse/execution failed \_PR.CPU6._CPC, AE_NOT_FOUND (20170831/psparse-550)
[    0.876944] ACPI Error: [CPC1] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    0.876948] No Local Variables are initialized for Method [_CPC]
[    0.876949] No Arguments are initialized for method [_CPC]
[    0.876950] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20170831/psparse-550)
[    0.876953] ACPI Error: Method parse/execution failed \_PR.CPU7._CPC, AE_NOT_FOUND (20170831/psparse-550)
[    0.878139] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.878622] thermal LNXTHERM:00: registered as thermal_zone0
[    0.878623] ACPI: Thermal Zone [THM0] (48 C)
[    0.878738] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.900560] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.903127] Linux agpgart interface v0.103
[    0.905638] loop: module loaded
[    0.905743] libphy: Fixed MDIO Bus: probed
[    0.905743] tun: Universal TUN/TAP device driver, 1.6
[    0.905808] PPP generic driver version 2.4.2
[    0.905862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.905864] ehci-pci: EHCI PCI platform driver
[    0.905869] ehci-platform: EHCI generic platform driver
[    0.905875] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.905876] ohci-pci: OHCI PCI platform driver
[    0.905880] ohci-platform: OHCI generic platform driver
[    0.905884] uhci_hcd: USB Universal Host Controller Interface driver
[    0.906010] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.906018] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.907262] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.907270] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.907555] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.907556] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.907558] usb usb1: Product: xHCI Host Controller
[    0.907559] usb usb1: Manufacturer: Linux 4.15.0-23-generic xhci-hcd
[    0.907560] usb usb1: SerialNumber: 0000:00:14.0
[    0.907677] hub 1-0:1.0: USB hub found
[    0.907702] hub 1-0:1.0: 16 ports detected
[    0.909815] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.909817] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.909844] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.909846] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.909846] usb usb2: Product: xHCI Host Controller
[    0.909847] usb usb2: Manufacturer: Linux 4.15.0-23-generic xhci-hcd
[    0.909848] usb usb2: SerialNumber: 0000:00:14.0
[    0.910018] hub 2-0:1.0: USB hub found
[    0.910039] hub 2-0:1.0: 8 ports detected
[    0.911420] usb: port power management may be unreliable
[    0.911697] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.914942] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.914944] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.915372] mousedev: PS/2 mouse device common for all mice
[    0.916102] rtc_cmos 00:02: RTC can wake from S4
[    0.917032] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.917281] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.917285] i2c /dev entries driver
[    0.917314] device-mapper: uevent: version 1.0.3
[    0.917415] ACPI: Battery Slot [BAT0] (battery present)
[    0.917521] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.917523] intel_pstate: Intel P-state driver initializing
[    0.918173] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.919069] intel_pstate: HWP enabled
[    0.919713] ledtrig-cpu: registered to indicate activity on CPUs
[    0.919714] EFI Variables Facility v0.08 2004-May-17
[    0.965032] intel_pmc_core:  initialized
[    0.965214] NET: Registered protocol family 10
[    0.969530] Segment Routing with IPv6
[    0.969542] NET: Registered protocol family 17
[    0.969773] Key type dns_resolver registered
[    0.970884] RAS: Correctable Errors collector initialized.
[    0.970906] microcode: sig=0x506e3, pf=0x20, revision=0xc6
[    0.971462] microcode: Microcode Update Driver: v2.2.
[    0.971469] sched_clock: Marking stable (971457283, 0)->(969671375, 1785908)
[    0.971864] registered taskstats version 1
[    0.971870] Loading compiled-in X.509 certificates
[    0.973615] Loaded X.509 cert 'Build time autogenerated kernel key: d77482c25b833df502ed38a87c5d7f330fdff3cb'
[    0.974367] Loaded UEFI:db cert 'Lenovo Ltd.: ThinkPad Product CA 2012: 838b1f54c1550463f45f98700640f11069265949' linked to secondary sys keyring
[    0.974378] Loaded UEFI:db cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f' linked to secondary sys keyring
[    0.974389] Loaded UEFI:db cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f' linked to secondary sys keyring
[    0.974419] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[    0.974434] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[    0.977333] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[    0.978079] zswap: loaded using pool lzo/zbud
[    0.981488] Key type big_key registered
[    0.981494] Key type trusted registered
[    0.982848] Key type encrypted registered
[    0.982850] AppArmor: AppArmor sha1 policy hashing enabled
[    0.982852] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.982866] evm: HMAC attrs: 0x1
[    0.983960]   Magic number: 6:623:597
[    0.984331] rtc_cmos 00:02: setting system clock to 2018-06-21 19:35:17 UTC (1529609717)
[    0.984630] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.984630] EDD information not available.
[    0.986433] Freeing unused kernel memory: 2408K
[    1.020341] Write protecting the kernel read-only data: 20480k
[    1.020974] Freeing unused kernel memory: 2008K
[    1.023513] Freeing unused kernel memory: 1904K
[    1.027794] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.099861] ahci 0000:00:17.0: version 3.0
[    1.100175] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[    1.100178] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst 
[    1.100231] pps_core: LinuxPPS API ver. 1 registered
[    1.100231] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.100347] rtsx_pci 0000:04:00.0: enabling device (0000 -> 0002)
[    1.101299] scsi host0: ahci
[    1.101600] PTP clock support registered
[    1.103775] scsi host1: ahci
[    1.104434] scsi host2: ahci
[    1.104910] scsi host3: ahci
[    1.104954] ata1: SATA max UDMA/133 abar m2048@0xf424c000 port 0xf424c100 irq 123
[    1.104955] ata2: DUMMY
[    1.104955] ata3: DUMMY
[    1.104956] ata4: DUMMY
[    1.161373] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.161374] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.161595] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.239663] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    1.248298] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    1.304818] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) c8:5b:76:31:28:c3
[    1.304819] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    1.304927] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF
[    1.305026] i915 0000:00:02.0: enabling device (0006 -> 0007)
[    1.305677] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[    1.308230] [drm] Memory usable by graphics device = 4096M
[    1.308232] checking generic (c0000000 130000) vs hw (c0000000 20000000)
[    1.308232] fb: switching to inteldrmfb from EFI VGA
[    1.308244] Console: switching to colour dummy device 80x25
[    1.308507] [drm] Replacing VGA console driver
[    1.315612] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.315613] [drm] Driver supports precise vblank timestamp query.
[    1.317793] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem
[    1.318171] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[    1.327348] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    1.327444] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    1.327655] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:00/input/input6
[    1.330013] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.330210] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    1.400761] usb 1-1: New USB device found, idVendor=09da, idProduct=c10a
[    1.400762] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.400763] usb 1-1: Product: USB Mouse
[    1.400765] usb 1-1: Manufacturer: A4Tech
[    1.403636] hidraw: raw HID events driver (C) Jiri Kosina
[    1.407262] usbcore: registered new interface driver usbhid
[    1.407262] usbhid: USB HID core driver
[    1.408723] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:09DA:C10A.0001/input/input8
[    1.408856] hid-generic 0003:09DA:C10A.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:14.0-1/input0
[    1.419266] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.419964] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.419966] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.420200] ata1.00: NCQ Send/Recv Log not supported
[    1.420201] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
[    1.420202] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.420478] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.420480] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.420710] ata1.00: NCQ Send/Recv Log not supported
[    1.420712] ata1.00: configured for UDMA/133
[    1.420971] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  6B0Q PQ: 0 ANSI: 5
[    1.421156] ata1.00: Enabling discard_zeroes_data
[    1.421157] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.421298] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.421315] sd 0:0:0:0: [sda] Write Protect is off
[    1.421317] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.421357] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.421476] ata1.00: Enabling discard_zeroes_data
[    1.422931]  sda: sda1 sda2 sda3 sda4
[    1.423176] ata1.00: Enabling discard_zeroes_data
[    1.423497] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.528043] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    1.678331] usb 1-6: New USB device found, idVendor=138a, idProduct=0090
[    1.678333] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    1.678334] usb 1-6: SerialNumber: 5f89888914e7
[    1.804044] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[    1.881962] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[    1.888148] clocksource: Switched to clocksource tsc
[    1.911531] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[    1.911535] psmouse serio1: synaptics: Your touchpad (PNP: LEN2018 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    1.952882] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b
[    1.952884] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.971094] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf006a3/0x943300/0x12e800/0x10000, board id: 3053, fw id: 2010421
[    1.971102] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.011790] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.039331] fbcon: inteldrmfb (fb0) is primary device
[    2.039384] Console: switching to colour frame buffer device 160x64
[    2.039399] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.080120] usb 1-8: new high-speed USB device number 5 using xhci_hcd
[    2.265795] usb 1-8: New USB device found, idVendor=04f2, idProduct=b541
[    2.265796] usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.265797] usb 1-8: Product: Integrated Camera
[    2.265799] usb 1-8: Manufacturer: Chicony Electronics Co.,Ltd.
[    2.265800] usb 1-8: SerialNumber: 0001
[    2.396010] usb 1-9: new full-speed USB device number 6 using xhci_hcd
[    2.556464] usb 1-9: New USB device found, idVendor=058f, idProduct=9540
[    2.556482] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.556483] usb 1-9: Product: EMV Smartcard Reader
[    2.556484] usb 1-9: Manufacturer: Generic
[    2.638864] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    2.816653] [drm] RC6 on
[    2.867621] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[    3.604320] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[    4.160007] raid6: sse2x1   gen() 11967 MB/s
[    4.208003] raid6: sse2x1   xor()  8843 MB/s
[    4.256003] raid6: sse2x2   gen() 14976 MB/s
[    4.304003] raid6: sse2x2   xor() 10175 MB/s
[    4.352002] raid6: sse2x4   gen() 17368 MB/s
[    4.400005] raid6: sse2x4   xor() 10188 MB/s
[    4.448003] raid6: avx2x1   gen() 24163 MB/s
[    4.496003] raid6: avx2x1   xor() 16760 MB/s
[    4.544002] raid6: avx2x2   gen() 29341 MB/s
[    4.592003] raid6: avx2x2   xor() 18326 MB/s
[    4.640003] raid6: avx2x4   gen() 33596 MB/s
[    4.688003] raid6: avx2x4   xor() 18358 MB/s
[    4.688004] raid6: using algorithm avx2x4 gen() 33596 MB/s
[    4.688005] raid6: .... xor() 18358 MB/s, rmw enabled
[    4.688005] raid6: using avx2x2 recovery algorithm
[    4.690490] xor: automatically using best checksumming function   avx       
[    4.702579] Btrfs loaded, crc32c=crc32c-intel
[    4.753034] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.859954] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.953750] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    4.972693] systemd[1]: Detected architecture x86-64.
[    4.974795] systemd[1]: Set hostname to <deus-ex-machina>.
[    5.046776] systemd[1]: Created slice User and Session Slice.
[    5.046823] systemd[1]: Reached target Remote File Systems.
[    5.047017] systemd[1]: Created slice System Slice.
[    5.047063] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.047104] systemd[1]: Listening on Syslog Socket.
[    5.047142] systemd[1]: Listening on udev Control Socket.
[    5.047191] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.169426] lp: driver loaded but no devices found
[    5.196140] ppdev: user-space parallel port driver
[    5.230788] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    5.295140] systemd-journald[398]: Received request to flush runtime journal from PID 1
[    5.405034] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    5.405152] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    5.408171] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    5.408660] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.413359] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    5.414280] random: crng init done
[    5.420320] Non-volatile memory driver v1.3
[    5.424582] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    5.424583] thinkpad_acpi: http://ibm-acpi.sf.net/
[    5.424583] thinkpad_acpi: ThinkPad BIOS R07ET84W (2.24 ), EC unknown
[    5.424584] thinkpad_acpi: Lenovo ThinkPad T460p, model 20FXS05500
[    5.428942] thinkpad_acpi: radio switch found; radios are enabled
[    5.428957] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    5.428957] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    5.433196] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    5.437584] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    5.440548] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10
[    5.468866] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.469045] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.546724] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    5.546725] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.546726] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.546726] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.546727] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.546727] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    5.556634] Intel(R) Wireless WiFi driver for Linux
[    5.556635] Copyright(c) 2003- 2015 Intel Corporation
[    5.557017] iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
[    5.559839] ipmi message handler version 39.2
[    5.565147] iwlwifi 0000:03:00.0: loaded firmware version 34.0.1 op_mode iwlmvm
[    5.581573] ipmi device interface
[    5.582424] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.590792] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[    5.599685] AVX2 version of gcm_enc/dec engaged.
[    5.599686] AES CTR mode by8 optimization enabled
[    5.617725] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC293: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    5.617728] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.617730] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[    5.617731] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.617733] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.617734] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[    5.617736] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1a
[    5.617737] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    5.631182] Adding 33554428k swap on /dev/sda4.  Priority:-2 extents:1 across:33554428k SSFS
[    5.666717] iwlwifi 0000:03:00.0: base HW address: e4:b3:18:94:16:f5
[    5.742937] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    5.743152] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    5.743169] thermal thermal_zone2: failed to read out thermal zone (-61)
[    5.758842] PKCS#7 signature not signed with a trusted key
[    5.758854] nvidia: loading out-of-tree module taints kernel.
[    5.758861] nvidia: module license 'NVIDIA' taints kernel.
[    5.758861] Disabling lock debugging due to kernel taint
[    5.762225] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    5.764417] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    5.764467] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    5.764522] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    5.764574] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    5.765083] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    5.765146] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    5.765189] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    5.765241] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    5.765300] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    5.771291] nvidia-nvlink: Nvlink Core is being initialized, major device number 238
[    5.771481] nvidia 0000:02:00.0: enabling device (0004 -> 0007)
[    5.771647] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  390.48  Thu Mar 22 00:42:57 PDT 2018 (using threaded interrupts)
[    5.805747] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    5.809685] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    5.815604] PKCS#7 signature not signed with a trusted key
[    5.816537] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.48  Wed Mar 21 23:48:34 PDT 2018
[    5.817254] PKCS#7 signature not signed with a trusted key
[    5.819285] [drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver
[    5.819287] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:02:00.0 on minor 1
[    5.861368] intel_rapl: Found RAPL domain package
[    5.861370] intel_rapl: Found RAPL domain core
[    5.861371] intel_rapl: Found RAPL domain uncore
[    5.861372] intel_rapl: Found RAPL domain dram
[    5.907695] PKCS#7 signature not signed with a trusted key
[    5.910201] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 237
[    5.915639] audit: type=1400 audit(1529609722.423:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=751 comm="apparmor_parser"
[    5.920288] audit: type=1400 audit(1529609722.431:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=754 comm="apparmor_parser"
[    5.920689] audit: type=1400 audit(1529609722.431:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=750 comm="apparmor_parser"
[    5.920692] audit: type=1400 audit(1529609722.431:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=750 comm="apparmor_parser"
[    5.920694] audit: type=1400 audit(1529609722.431:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=750 comm="apparmor_parser"
[    5.922919] audit: type=1400 audit(1529609722.431:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=747 comm="apparmor_parser"
[    5.922921] audit: type=1400 audit(1529609722.431:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=747 comm="apparmor_parser"
[    5.924296] audit: type=1400 audit(1529609722.435:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=764 comm="apparmor_parser"
[    5.924419] audit: type=1400 audit(1529609722.435:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=752 comm="apparmor_parser"
[    5.924422] audit: type=1400 audit(1529609722.435:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=752 comm="apparmor_parser"
[    5.939885] ACPI Warning: \_SB.PCI0.PEG2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[    6.590415] media: Linux media interface: v0.10
[    6.595109] Linux video capture interface: v2.00
[    6.671758] Bluetooth: Core ver 2.22
[    6.671777] NET: Registered protocol family 31
[    6.671778] Bluetooth: HCI device and connection manager initialized
[    6.671780] Bluetooth: HCI socket layer initialized
[    6.671782] Bluetooth: L2CAP socket layer initialized
[    6.671786] Bluetooth: SCO socket layer initialized
[    6.787186] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b541)
[    6.788477] usbcore: registered new interface driver btusb
[    6.789018] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[    6.790075] uvcvideo: Failed to initialize entity for entity 6
[    6.790077] uvcvideo: Failed to register entites (-22).
[    6.790269] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input20
[    6.790476] usbcore: registered new interface driver uvcvideo
[    6.790478] USB Video Class driver (1.1.1)
[    6.796000] Bluetooth: hci0: Device revision is 5
[    6.796021] Bluetooth: hci0: Secure boot is enabled
[    6.796022] Bluetooth: hci0: OTP lock is enabled
[    6.796022] Bluetooth: hci0: API lock is enabled
[    6.796023] Bluetooth: hci0: Debug lock is disabled
[    6.796024] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    6.892993] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.892994] Bluetooth: BNEP filters: protocol multicast
[    6.892997] Bluetooth: BNEP socket layer initialized
[    6.893086] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[    7.218122] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[    7.404206] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[    7.407755] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    7.586845] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[    7.587175] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[    7.657194] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    7.731234] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    8.318295] Bluetooth: hci0: Waiting for firmware download to complete
[    8.319308] Bluetooth: hci0: Firmware loaded in 1494973 usecs
[    8.319423] Bluetooth: hci0: Waiting for device to boot
[    8.331030] Bluetooth: hci0: Device booted in 11409 usecs
[    8.331399] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[    8.335316] Bluetooth: hci0: Applying Intel DDC parameters completed
[    8.942086] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[    8.942368] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[   10.281513] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[   11.444812] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   11.444886] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[   11.731763] PKCS#7 signature not signed with a trusted key
[   11.754656] vboxdrv: Found 8 processor cores
[   11.776656] vboxdrv: TSC mode is Invariant, tentative frequency 2591971113 Hz
[   11.776658] vboxdrv: Successfully loaded version 5.2.10_Ubuntu (interface 0x00290001)
[   11.787949] PKCS#7 signature not signed with a trusted key
[   11.788756] VBoxNetFlt: Successfully started.
[   11.860205] PKCS#7 signature not signed with a trusted key
[   11.860887] VBoxNetAdp: Successfully started.
[   11.872596] PKCS#7 signature not signed with a trusted key
[   11.873316] VBoxPciLinuxInit
[   11.878528] vboxpci: IOMMU not found (not registered)
[   11.960139] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[   12.012789] kauditd_printk_skb: 12 callbacks suppressed
[   12.012791] audit: type=1400 audit(1529609728.523:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1601 comm="apparmor_parser"
[   12.053979] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   12.055411] Bridge firewalling registered
[   12.064905] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   12.289849] Initializing XFRM netlink socket
[   12.293302] Netfilter messages via NETLINK v0.30.
[   12.294481] ctnetlink v0.93: registering with nfnetlink.
[   12.512641] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   13.232699] PKCS#7 signature not signed with a trusted key
[   28.673915] wlp3s0: authenticate with 00:04:0e:e4:dc:64
[   28.683071] wlp3s0: send auth to 00:04:0e:e4:dc:64 (try 1/3)
[   28.692266] wlp3s0: authenticated
[   28.694663] wlp3s0: associate with 00:04:0e:e4:dc:64 (try 1/3)
[   28.705382] wlp3s0: RX AssocResp from 00:04:0e:e4:dc:64 (capab=0x411 status=0 aid=1)
[   28.710026] wlp3s0: associated
[   28.766539] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   32.195609] Bluetooth: RFCOMM TTY layer initialized
[   32.195615] Bluetooth: RFCOMM socket layer initialized
[   32.195619] Bluetooth: RFCOMM ver 1.11
[   34.602957] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[   34.603320] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[   35.495872] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[   35.496182] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[   35.590807] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[   35.591171] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[   56.481313] usb 1-7: USB disconnect, device number 4
[  287.468442] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[  287.468820] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[  289.535914] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[  289.536224] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[  333.734787] usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
[  333.756933] usb 2-3: New USB device found, idVendor=174c, idProduct=55aa
[  333.756939] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  333.756943] usb 2-3: Product: ASM1156-PM
[  333.756946] usb 2-3: Manufacturer: ASMT
[  333.756949] usb 2-3: SerialNumber: 00000000000000000000
[  334.303538] usbcore: registered new interface driver usb-storage
[  334.309704] scsi host4: uas
[  334.309912] usbcore: registered new interface driver uas
[  334.313274] scsi 4:0:0:0: Direct-Access     ASMT     ASM1156-PM       0    PQ: 0 ANSI: 6
[  334.318242] sd 4:0:0:0: Attached scsi generic sg1 type 0
[  334.324150] sd 4:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[  334.324155] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[  334.324318] sd 4:0:0:0: [sdb] Write Protect is off
[  334.324322] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  334.324595] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  334.378135]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
[  334.386853] sd 4:0:0:0: [sdb] Attached SCSI disk
[  336.292572] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
[ 5680.473245] wlp3s0: deauthenticating from 00:04:0e:e4:dc:64 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 5680.484467] wlp3s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
[ 5680.484541] wlp3s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
[ 5680.567246] e1000e: enp0s31f6 NIC Link is Down
[ 5680.726685] PM: suspend entry (deep)
[ 5680.726687] PM: Syncing filesystems ... done.
[ 5682.266718] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[ 5682.692132] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 5682.695574] OOM killer disabled.
[ 5682.695576] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 5682.697242] Suspending console(s) (use no_console_suspend to debug)
[ 5682.717664] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[ 5682.841764] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 5682.843481] sd 0:0:0:0: [sda] Stopping disk
[ 5682.870342] e1000e: EEE TX LPI TIMER: 00000011
[ 5683.342283] ACPI: Preparing to enter system sleep state S3
[ 5683.629533] ACPI: EC: event blocked
[ 5683.629534] ACPI: EC: EC stopped
[ 5683.629535] PM: Saving platform NVS memory
[ 5683.629552] Disabling non-boot CPUs ...
[ 5683.647305] smpboot: CPU 1 is now offline
[ 5683.671229] smpboot: CPU 2 is now offline
[ 5683.702154] IRQ 123: no longer affine to CPU3
[ 5683.703183] smpboot: CPU 3 is now offline
[ 5683.726211] IRQ 126: no longer affine to CPU4
[ 5683.727226] smpboot: CPU 4 is now offline
[ 5683.750064] IRQ 122: no longer affine to CPU5
[ 5683.751082] smpboot: CPU 5 is now offline
[ 5683.773967] IRQ 130: no longer affine to CPU6
[ 5683.774978] smpboot: CPU 6 is now offline
[ 5683.805964] IRQ 128: no longer affine to CPU7
[ 5683.806978] smpboot: CPU 7 is now offline
[ 5683.812334] ACPI: Low-level resume complete
[ 5683.812434] ACPI: EC: EC started
[ 5683.812434] PM: Restoring platform NVS memory
[ 5683.813222] Enabling non-boot CPUs ...
[ 5683.813256] x86: Booting SMP configuration:
[ 5683.813256] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 5683.813715]  cache: parent cpu1 should not be sleeping
[ 5683.813906] CPU1 is up
[ 5683.813926] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 5683.814381]  cache: parent cpu2 should not be sleeping
[ 5683.814606] CPU2 is up
[ 5683.814624] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 5683.815079]  cache: parent cpu3 should not be sleeping
[ 5683.815316] CPU3 is up
[ 5683.815334] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 5683.815815]  cache: parent cpu4 should not be sleeping
[ 5683.816051] CPU4 is up
[ 5683.816075] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 5683.816530]  cache: parent cpu5 should not be sleeping
[ 5683.816772] CPU5 is up
[ 5683.816793] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 5683.817281]  cache: parent cpu6 should not be sleeping
[ 5683.817546] CPU6 is up
[ 5683.817564] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 5683.818031]  cache: parent cpu7 should not be sleeping
[ 5683.818299] CPU7 is up
[ 5683.824228] ACPI: Waking up from system sleep state S3
[ 5684.371885] sd 0:0:0:0: [sda] Starting disk
[ 5684.372155] ACPI: button: The lid device is not compliant to SW_LID.
[ 5684.372158] ACPI: EC: event unblocked
[ 5684.592825] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[ 5684.660884] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[ 5684.687254] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5684.687900] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 5684.687902] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 5684.747703] ata1.00: NCQ Send/Recv Log not supported
[ 5684.747943] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 5684.747944] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 5684.748139] ata1.00: NCQ Send/Recv Log not supported
[ 5684.748141] ata1.00: configured for UDMA/133
[ 5684.758243] ata1.00: Enabling discard_zeroes_data
[ 5684.937094] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[ 5685.021260] thinkpad_acpi: EC reports that Thermal Table has changed
[ 5685.100799] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[ 5685.126460] thinkpad_acpi: EC reports that Thermal Table has changed
[ 5685.135063] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[ 5685.213436] usb 1-9: reset full-speed USB device number 6 using xhci_hcd
[ 5686.029105] [drm] RC6 on
[ 5687.170271] xhci_hcd 0000:00:14.0: Cannot set link state.
[ 5687.170379] usb usb2-port3: cannot disable (err = -32)
[ 5687.172165] OOM killer enabled.
[ 5687.172166] Restarting tasks ... 
[ 5687.172299] usb 2-3: USB disconnect, device number 2
[ 5687.178938] done.
[ 5687.179736] print_req_error: I/O error, dev sdb, sector 0
[ 5687.181992] thermal thermal_zone2: failed to read out thermal zone (-61)
[ 5687.184128] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[ 5687.210283] PM: suspend exit
[ 5687.420204] sd 4:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 5687.552339] blk_partition_remap: fail for partition 4
[ 5687.552347] Buffer I/O error on dev sdb4, logical block 268468224, lost sync page write
[ 5687.552356] JBD2: Error -5 detected when updating journal superblock for sdb4-8.
[ 5687.552361] Aborting journal on device sdb4-8.
[ 5687.552366] blk_partition_remap: fail for partition 4
[ 5687.552369] Buffer I/O error on dev sdb4, logical block 268468224, lost sync page write
[ 5687.552373] JBD2: Error -5 detected when updating journal superblock for sdb4-8.
[ 5687.610429] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 5687.800531] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 5687.802602] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 5688.060213] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 5688.151361] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 5690.706369] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 5690.706615] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[ 5691.583586] wlp3s0: authenticate with 00:04:0e:e4:dc:64
[ 5691.591339] wlp3s0: send auth to 00:04:0e:e4:dc:64 (try 1/3)
[ 5691.600420] wlp3s0: authenticated
[ 5691.603494] wlp3s0: associate with 00:04:0e:e4:dc:64 (try 1/3)
[ 5691.608634] wlp3s0: RX AssocResp from 00:04:0e:e4:dc:64 (capab=0x411 status=0 aid=3)
[ 5691.612728] wlp3s0: associated
[ 5691.632213] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 5920.284515] usb 1-2: new high-speed USB device number 8 using xhci_hcd
[ 5920.520409] usb 1-2: New USB device found, idVendor=058f, idProduct=6387
[ 5920.520415] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5920.520421] usb 1-2: Product: Spaceloop 8GB
[ 5920.520425] usb 1-2: SerialNumber: 2D6FCEC3
[ 5920.521430] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 5920.521930] scsi host4: usb-storage 1-2:1.0
[ 5921.549821] scsi 4:0:0:0: Direct-Access              Spaceloop 8GB    8.07 PQ: 0 ANSI: 2
[ 5921.550552] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 5921.551157] sd 4:0:0:0: [sdb] 16449536 512-byte logical blocks: (8.42 GB/7.84 GiB)
[ 5921.551423] sd 4:0:0:0: [sdb] Write Protect is off
[ 5921.551430] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 5921.551615] sd 4:0:0:0: [sdb] No Caching mode page found
[ 5921.551627] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5921.645946]  sdb: sdb1
[ 5921.647581] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 5922.073375] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5926.241139] audit: type=1400 audit(1529651272.522:25): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/nvidia/nvidia-application-profiles-390.48-rc" pid=7836 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 5926.249854] audit: type=1400 audit(1529651272.530:26): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/nvidia/nvidia-application-profiles-390.48-rc" pid=7836 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 5926.258006] audit: type=1400 audit(1529651272.538:27): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=7836 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 5926.258291] audit: type=1400 audit(1529651272.542:28): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=7836 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 5926.258333] audit: type=1400 audit(1529651272.542:29): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/dev/nvidiactl" pid=7836 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=0
[ 5926.258380] audit: type=1400 audit(1529651272.542:30): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/devices/system/memory/block_size_bytes" pid=7836 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 5926.258486] audit: type=1400 audit(1529651272.542:31): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=7836 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 5926.258598] audit: type=1400 audit(1529651272.542:32): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=7836 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 5926.258630] audit: type=1400 audit(1529651272.542:33): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/dev/nvidia-modeset" pid=7836 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=0
[ 5926.258700] audit: type=1400 audit(1529651272.542:34): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=7836 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 5926.259726] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 5926.260166] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 5942.733218] usb 1-2: USB disconnect, device number 8
[ 6242.535226] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 6242.535504] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 6252.395754] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 6252.396180] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 6253.960805] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 6253.961172] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 6254.608027] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 6254.608459] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 6255.208222] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 6255.208646] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 6510.141604] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 6510.141987] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 6915.971994] usb 1-1: USB disconnect, device number 2
[ 6918.505734] usb 1-1: new low-speed USB device number 9 using xhci_hcd
[ 6918.663632] usb 1-1: New USB device found, idVendor=09da, idProduct=c10a
[ 6918.663638] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6918.663643] usb 1-1: Product: USB Mouse
[ 6918.663646] usb 1-1: Manufacturer: A4Tech
[ 6918.667822] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:09DA:C10A.0002/input/input21
[ 6918.668698] hid-generic 0003:09DA:C10A.0002: input,hiddev0,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:14.0-1/input0
[ 7430.235099] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 7430.235492] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 7600.345603] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 7600.345893] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 7807.690860] kauditd_printk_skb: 52 callbacks suppressed
[ 7807.690861] audit: type=1400 audit(1529653154.176:87): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/nvidia/nvidia-application-profiles-390.48-rc" pid=9694 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 7807.697815] audit: type=1400 audit(1529653154.184:88): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/nvidia/nvidia-application-profiles-390.48-rc" pid=9694 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 7807.703670] audit: type=1400 audit(1529653154.188:89): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=9694 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 7807.703822] audit: type=1400 audit(1529653154.188:90): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=9694 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 7807.703859] audit: type=1400 audit(1529653154.188:91): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/dev/nvidiactl" pid=9694 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=0
[ 7807.703888] audit: type=1400 audit(1529653154.188:92): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/devices/system/memory/block_size_bytes" pid=9694 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 7807.703993] audit: type=1400 audit(1529653154.188:93): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=9694 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 7807.704089] audit: type=1400 audit(1529653154.188:94): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=9694 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 7807.704115] audit: type=1400 audit(1529653154.188:95): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/dev/nvidia-modeset" pid=9694 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=0
[ 7807.704173] audit: type=1400 audit(1529653154.188:96): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=9694 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 7807.705071] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 7807.705359] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 7848.461744] kauditd_printk_skb: 48 callbacks suppressed
[ 7848.461745] audit: type=1400 audit(1529653194.951:145): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_51d08d4fe2cbb3da31affaa76b3c981" pid=9948 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[ 7848.461747] audit: type=1400 audit(1529653194.951:146): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_51d08d4fe2cbb3da31affaa76b3c981" pid=9948 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 7848.461749] audit: type=1400 audit(1529653194.951:147): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_51d08d4fe2cbb3da31affaa76b3c981" pid=9948 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 7848.461789] audit: type=1400 audit(1529653194.951:148): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_51d08d4fe2cbb3da31affaa76b3c981" pid=9948 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[ 7848.461791] audit: type=1400 audit(1529653194.951:149): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_51d08d4fe2cbb3da31affaa76b3c981" pid=9948 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[ 7937.433580] audit: type=1400 audit(1529653283.927:150): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/martin/.thunderbird/profiles.ini" pid=9693 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 7937.434488] audit: type=1400 audit(1529653283.931:151): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/martin/.thunderbird/4bg7nwmd.default/secmod.db" pid=9693 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 7937.434940] audit: type=1400 audit(1529653283.931:152): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/martin/.thunderbird/4bg7nwmd.default/cert8.db" pid=9693 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[ 7937.434943] audit: type=1400 audit(1529653283.931:153): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/martin/.thunderbird/4bg7nwmd.default/key3.db" pid=9693 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[ 8067.423114] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 8067.423473] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 8077.538709] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[ 8077.539151] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[11961.549536] usb 1-1: USB disconnect, device number 9
[11961.956818] usb 1-6: USB disconnect, device number 3
[11962.232378] usb 1-6: new full-speed USB device number 10 using xhci_hcd
[11962.381965] usb 1-6: New USB device found, idVendor=138a, idProduct=0090
[11962.381967] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[11962.381968] usb 1-6: SerialNumber: 5f89888914e7
[11963.304680] usb 1-1: new low-speed USB device number 11 using xhci_hcd
[11963.458092] usb 1-1: New USB device found, idVendor=09da, idProduct=c10a
[11963.458099] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[11963.458103] usb 1-1: Product: USB Mouse
[11963.458107] usb 1-1: Manufacturer: A4Tech
[11963.462403] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:09DA:C10A.0003/input/input22
[11963.521200] hid-generic 0003:09DA:C10A.0003: input,hiddev0,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:14.0-1/input0
[11963.792305] usb 1-2: new high-speed USB device number 12 using xhci_hcd
[11963.941260] usb 1-2: New USB device found, idVendor=04e8, idProduct=685c
[11963.941267] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[11963.941271] usb 1-2: Product: GT-N7100
[11963.941274] usb 1-2: Manufacturer: samsung
[11963.941278] usb 1-2: SerialNumber: 4df735e342d6cfa5
[11991.709072] usb 1-2: USB disconnect, device number 12
[11992.050568] usb 1-2: new high-speed USB device number 13 using xhci_hcd
[11992.199970] usb 1-2: New USB device found, idVendor=04e8, idProduct=685c
[11992.199976] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[11992.199980] usb 1-2: Product: GT-N7100
[11992.199985] usb 1-2: Manufacturer: samsung
[11992.199988] usb 1-2: SerialNumber: 4df735e342d6cfa5
[12018.957197] usb 1-2: USB disconnect, device number 13
[12038.923977] usb 1-2: new high-speed USB device number 14 using xhci_hcd
[12039.073074] usb 1-2: New USB device found, idVendor=04e8, idProduct=685c
[12039.073080] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[12039.073085] usb 1-2: Product: GT-N7100
[12039.073088] usb 1-2: Manufacturer: samsung
[12039.073092] usb 1-2: SerialNumber: 4df735e342d6cfa5
[12040.647121] usb 1-2: USB disconnect, device number 14
[12040.992039] usb 1-2: new high-speed USB device number 15 using xhci_hcd
[12041.140983] usb 1-2: New USB device found, idVendor=04e8, idProduct=685c
[12041.140989] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[12041.140994] usb 1-2: Product: GT-N7100
[12041.140997] usb 1-2: Manufacturer: samsung
[12041.141001] usb 1-2: SerialNumber: 4df735e342d6cfa5
[12127.975844] usb 1-2: USB disconnect, device number 15
[12129.534069] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[12129.534419] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[12152.062451] usb 1-2: new high-speed USB device number 16 using xhci_hcd
[12152.211290] usb 1-2: New USB device found, idVendor=18d1, idProduct=d001
[12152.211291] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[12152.211292] usb 1-2: Product: GT-N7100
[12152.211293] usb 1-2: Manufacturer: samsung
[12152.211294] usb 1-2: SerialNumber: 4df735e342d6cfa5
[12190.551515] usb 1-2: USB disconnect, device number 16
[12190.856927] usb 1-2: new high-speed USB device number 17 using xhci_hcd
[12191.005451] usb 1-2: New USB device found, idVendor=18d1, idProduct=4ee2
[12191.005453] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[12191.005454] usb 1-2: Product: GT-N7100
[12191.005455] usb 1-2: Manufacturer: samsung
[12191.005456] usb 1-2: SerialNumber: 4df735e342d6cfa5
[12334.512511] usb 1-2: reset high-speed USB device number 17 using xhci_hcd
[12334.662487] usb 1-2: USB disconnect, device number 17
[12334.968272] usb 1-2: new high-speed USB device number 18 using xhci_hcd
[12335.117184] usb 1-2: New USB device found, idVendor=18d1, idProduct=4ee2
[12335.117186] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[12335.117187] usb 1-2: Product: GT-N7100
[12335.117188] usb 1-2: Manufacturer: samsung
[12335.117189] usb 1-2: SerialNumber: 4df735e342d6cfa5
[12338.380352] usb 1-2: USB disconnect, device number 18
[12339.040174] usb 1-2: new high-speed USB device number 19 using xhci_hcd
[12339.188690] usb 1-2: New USB device found, idVendor=18d1, idProduct=d001
[12339.188691] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[12339.188693] usb 1-2: Product: GT-N7100
[12339.188694] usb 1-2: Manufacturer: samsung
[12339.188695] usb 1-2: SerialNumber: 4df735e342d6cfa5
[12508.825950] usb 1-2: USB disconnect, device number 19
[12708.194394] usb 1-2: new high-speed USB device number 20 using xhci_hcd
[12708.342849] usb 1-2: New USB device found, idVendor=04e8, idProduct=685c
[12708.342854] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[12708.342860] usb 1-2: Product: GT-N7100
[12708.342863] usb 1-2: Manufacturer: samsung
[12708.342867] usb 1-2: SerialNumber: 4df735e342d6cfa5
[12840.601225] usb 1-2: USB disconnect, device number 20
[12865.679459] wlp3s0: deauthenticating from 00:04:0e:e4:dc:64 by local choice (Reason: 3=DEAUTH_LEAVING)
[12865.689429] wlp3s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
[12865.689488] wlp3s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
[12865.766152] e1000e: enp0s31f6 NIC Link is Down
[12865.914417] PM: suspend entry (deep)
[12865.914419] PM: Syncing filesystems ... done.
[12867.533074] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[12867.955130] Freezing user space processes ... (elapsed 0.004 seconds) done.
[12867.959167] OOM killer disabled.
[12867.959169] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[12867.960990] Suspending console(s) (use no_console_suspend to debug)
[12868.205447] psmouse serio2: Failed to disable mouse on synaptics-pt/serio0
[12868.321541] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[12868.323469] sd 0:0:0:0: [sda] Stopping disk
[12868.352902] e1000e: EEE TX LPI TIMER: 00000011
[12868.837792] ACPI: Preparing to enter system sleep state S3
[12869.125107] ACPI: EC: event blocked
[12869.125108] ACPI: EC: EC stopped
[12869.125109] PM: Saving platform NVS memory
[12869.125127] Disabling non-boot CPUs ...
[12869.142878] smpboot: CPU 1 is now offline
[12869.166806] smpboot: CPU 2 is now offline
[12869.189737] IRQ 123: no longer affine to CPU3
[12869.191513] smpboot: CPU 3 is now offline
[12869.213661] IRQ 126: no longer affine to CPU4
[12869.214684] smpboot: CPU 4 is now offline
[12869.237594] IRQ 122: no longer affine to CPU5
[12869.238619] smpboot: CPU 5 is now offline
[12869.261577] IRQ 130: no longer affine to CPU6
[12869.262596] smpboot: CPU 6 is now offline
[12869.285555] IRQ 128: no longer affine to CPU7
[12869.286581] smpboot: CPU 7 is now offline
[12869.291086] ACPI: Low-level resume complete
[12869.291185] ACPI: EC: EC started
[12869.291185] PM: Restoring platform NVS memory
[12869.291984] Enabling non-boot CPUs ...
[12869.292029] x86: Booting SMP configuration:
[12869.292029] smpboot: Booting Node 0 Processor 1 APIC 0x2
[12869.292508]  cache: parent cpu1 should not be sleeping
[12869.292701] CPU1 is up
[12869.292729] smpboot: Booting Node 0 Processor 2 APIC 0x4
[12869.293190]  cache: parent cpu2 should not be sleeping
[12869.293416] CPU2 is up
[12869.293438] smpboot: Booting Node 0 Processor 3 APIC 0x6
[12869.293895]  cache: parent cpu3 should not be sleeping
[12869.294135] CPU3 is up
[12869.294194] smpboot: Booting Node 0 Processor 4 APIC 0x1
[12869.294660]  cache: parent cpu4 should not be sleeping
[12869.294900] CPU4 is up
[12869.294922] smpboot: Booting Node 0 Processor 5 APIC 0x3
[12869.295376]  cache: parent cpu5 should not be sleeping
[12869.295617] CPU5 is up
[12869.295638] smpboot: Booting Node 0 Processor 6 APIC 0x5
[12869.296095]  cache: parent cpu6 should not be sleeping
[12869.296353] CPU6 is up
[12869.296372] smpboot: Booting Node 0 Processor 7 APIC 0x7
[12869.296831]  cache: parent cpu7 should not be sleeping
[12869.297100] CPU7 is up
[12869.302990] ACPI: Waking up from system sleep state S3
[12869.848149] ACPI: EC: event unblocked
[12869.848300] sd 0:0:0:0: [sda] Starting disk
[12870.068419] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[12870.136528] usb 1-9: reset full-speed USB device number 6 using xhci_hcd
[12870.163283] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12870.163950] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[12870.163952] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[12870.223983] ata1.00: NCQ Send/Recv Log not supported
[12870.224226] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[12870.224228] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[12870.224432] ata1.00: NCQ Send/Recv Log not supported
[12870.224434] ata1.00: configured for UDMA/133
[12870.234542] ata1.00: Enabling discard_zeroes_data
[12870.412612] usb 1-6: reset full-speed USB device number 10 using xhci_hcd
[12870.476198] thinkpad_acpi: EC reports that Thermal Table has changed
[12870.570504] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[12870.581964] thinkpad_acpi: EC reports that Thermal Table has changed
[12870.605623] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[12870.688748] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[12870.875655] OOM killer enabled.
[12870.875657] Restarting tasks ... done.
[12870.881130] thermal thermal_zone2: failed to read out thermal zone (-61)
[12870.904926] PM: suspend exit
[12870.927198] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[12871.112709] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[12871.114821] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[12871.368353] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[12871.442531] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[12871.676871] [drm] RC6 on
[12874.434008] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[12874.434097] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[12874.884131] wlp3s0: authenticate with 00:04:0e:e4:dc:64
[12874.891213] wlp3s0: send auth to 00:04:0e:e4:dc:64 (try 1/3)
[12874.898044] wlp3s0: authenticated
[12874.900328] wlp3s0: associate with 00:04:0e:e4:dc:64 (try 1/3)
[12874.907715] wlp3s0: RX AssocResp from 00:04:0e:e4:dc:64 (capab=0x411 status=0 aid=2)
[12874.921927] wlp3s0: associated
[12874.945065] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[12880.938545] wlp3s0: deauthenticating from 00:04:0e:e4:dc:64 by local choice (Reason: 3=DEAUTH_LEAVING)
[12880.947487] wlp3s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
[12881.033839] e1000e: enp0s31f6 NIC Link is Down
[12881.275490] PM: suspend entry (deep)
[12881.275492] PM: Syncing filesystems ... done.
[12882.828555] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[12882.886969] Freezing user space processes ... (elapsed 0.003 seconds) done.
[12882.890926] OOM killer disabled.
[12882.890927] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[12882.892744] Suspending console(s) (use no_console_suspend to debug)
[12883.040440] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[12883.042117] sd 0:0:0:0: [sda] Stopping disk
[12883.070861] e1000e: EEE TX LPI TIMER: 00000011
[12883.545130] ACPI: Preparing to enter system sleep state S3
[12883.832439] ACPI: EC: event blocked
[12883.832441] ACPI: EC: EC stopped
[12883.832442] PM: Saving platform NVS memory
[12883.832459] Disabling non-boot CPUs ...
[12883.850179] smpboot: CPU 1 is now offline
[12883.870134] smpboot: CPU 2 is now offline
[12883.894088] smpboot: CPU 3 is now offline
[12883.918030] smpboot: CPU 4 is now offline
[12883.941919] smpboot: CPU 5 is now offline
[12883.965873] smpboot: CPU 6 is now offline
[12883.989836] smpboot: CPU 7 is now offline
[12883.993789] ACPI: Low-level resume complete
[12883.993888] ACPI: EC: EC started
[12883.993889] PM: Restoring platform NVS memory
[12883.994687] Enabling non-boot CPUs ...
[12883.994724] x86: Booting SMP configuration:
[12883.994724] smpboot: Booting Node 0 Processor 1 APIC 0x2
[12883.995208]  cache: parent cpu1 should not be sleeping
[12883.995431] CPU1 is up
[12883.995451] smpboot: Booting Node 0 Processor 2 APIC 0x4
[12883.995959]  cache: parent cpu2 should not be sleeping
[12883.996158] CPU2 is up
[12883.996178] smpboot: Booting Node 0 Processor 3 APIC 0x6
[12883.996669]  cache: parent cpu3 should not be sleeping
[12883.996913] CPU3 is up
[12883.996934] smpboot: Booting Node 0 Processor 4 APIC 0x1
[12883.997441]  cache: parent cpu4 should not be sleeping
[12883.997675] CPU4 is up
[12883.997698] smpboot: Booting Node 0 Processor 5 APIC 0x3
[12883.998178]  cache: parent cpu5 should not be sleeping
[12883.998419] CPU5 is up
[12883.998452] smpboot: Booting Node 0 Processor 6 APIC 0x5
[12883.998924]  cache: parent cpu6 should not be sleeping
[12883.999173] CPU6 is up
[12883.999202] smpboot: Booting Node 0 Processor 7 APIC 0x7
[12883.999697]  cache: parent cpu7 should not be sleeping
[12883.999995] CPU7 is up
[12884.005881] ACPI: Waking up from system sleep state S3
[12884.552385] sd 0:0:0:0: [sda] Starting disk
[12884.552411] ACPI: EC: event unblocked
[12884.765199] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[12884.843832] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[12884.866076] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12884.866865] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[12884.866867] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[12884.922196] ata1.00: NCQ Send/Recv Log not supported
[12884.922435] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[12884.922437] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[12884.922633] ata1.00: NCQ Send/Recv Log not supported
[12884.922634] ata1.00: configured for UDMA/133
[12884.932740] ata1.00: Enabling discard_zeroes_data
[12885.120075] usb 1-9: reset full-speed USB device number 6 using xhci_hcd
[12885.199928] thinkpad_acpi: EC reports that Thermal Table has changed
[12885.268183] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[12885.302593] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[12885.305779] thinkpad_acpi: EC reports that Thermal Table has changed
[12885.396385] usb 1-6: reset full-speed USB device number 10 using xhci_hcd
[12885.547165] OOM killer enabled.
[12885.547167] Restarting tasks ... done.
[12885.565100] thermal thermal_zone2: failed to read out thermal zone (-61)
[12885.577414] PM: suspend exit
[12885.601087] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[12885.788060] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[12885.790170] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[12886.044383] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[12886.122602] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[12886.656199] [drm] RC6 on
[12889.271436] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[12889.271498] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[12889.529858] wlp3s0: authenticate with e8:df:70:71:eb:92
[12889.537915] wlp3s0: send auth to e8:df:70:71:eb:92 (try 1/3)
[12889.546309] wlp3s0: authenticated
[12889.547729] wlp3s0: associate with e8:df:70:71:eb:92 (try 1/3)
[12889.560485] wlp3s0: RX AssocResp from e8:df:70:71:eb:92 (capab=0x431 status=0 aid=3)
[12889.564219] wlp3s0: associated
[12889.597253] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[13126.100748] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
[13126.121745] usb 2-2: New USB device found, idVendor=0fce, idProduct=01fa
[13126.121751] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13126.121755] usb 2-2: Product: H8266
[13126.121759] usb 2-2: Manufacturer: Sony
[13126.121762] usb 2-2: SerialNumber: QV7002CT1F
[13127.408234] usb 2-2: USB disconnect, device number 3
[13127.791648] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd
[13127.813866] usb 2-2: New USB device found, idVendor=0fce, idProduct=01fa
[13127.813872] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13127.813876] usb 2-2: Product: H8266
[13127.813879] usb 2-2: Manufacturer: Sony
[13127.813883] usb 2-2: SerialNumber: QV7002CT1F
[13149.001020] mmap: multiqueue0:src (16067): VmData 271618048 exceed data ulimit 268435456. Update limits or use boot option ignore_rlimit_data.
[13149.001179] traps: multiqueue0:src[16067] trap int3 ip:7fc070bc9c41 sp:7fc052f3a8d0 error:0 in libglib-2.0.so.0.5600.1[7fc070b78000+113000]
[13159.371924] xhci_hcd 0000:00:14.0: Cannot set link state.
[13159.371938] usb usb2-port2: cannot disable (err = -32)
[13159.371986] xhci_hcd 0000:00:14.0: Cannot set link state.
[13159.371996] usb usb2-port2: cannot disable (err = -32)
[13159.372108] usb 2-2: USB disconnect, device number 4
[13160.259756] usb 2-2: new SuperSpeed USB device number 5 using xhci_hcd
[13160.286104] usb 2-2: New USB device found, idVendor=0fce, idProduct=01fa
[13160.286110] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13160.286114] usb 2-2: Product: H8266
[13160.286118] usb 2-2: Manufacturer: Sony
[13160.286122] usb 2-2: SerialNumber: QV7002CT1F
[13166.756478] usb 2-2: USB disconnect, device number 5
[13971.178199] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[13971.178625] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[19207.070049] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[19207.070447] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[22919.351512] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun
[22919.362866] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[22921.585084] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun
[22922.768724] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[23145.855422] usb 1-1: USB disconnect, device number 11
[23146.278639] xhci_hcd 0000:00:14.0: Root hub is not suspended
[23148.129394] usb 1-1: new low-speed USB device number 22 using xhci_hcd
[23148.283163] usb 1-1: New USB device found, idVendor=09da, idProduct=c10a
[23148.283169] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[23148.283174] usb 1-1: Product: USB Mouse
[23148.283178] usb 1-1: Manufacturer: A4Tech
[23148.287481] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:09DA:C10A.0004/input/input23
[23148.288283] hid-generic 0003:09DA:C10A.0004: input,hiddev0,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:14.0-1/input0
[23219.964103] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[23219.964475] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[30056.624809] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[30056.625208] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[46586.035320] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[46586.035622] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[46642.501971] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[46642.502363] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[46670.823017] EXT4-fs error (device sda3): ext4_find_extent:915: inode #13801: comm java: pblk 1264786 bad header/extent: extent tree corrupted - magic f30a, entries 7, max 340(340), depth 0(0)
[46670.824366] EXT4-fs error (device sda3): ext4_find_extent:915: inode #13801: comm java: pblk 1264786 bad header/extent: extent tree corrupted - magic f30a, entries 7, max 340(340), depth 0(0)
[46670.825767] EXT4-fs error (device sda3): ext4_find_extent:915: inode #13801: comm java: pblk 1264786 bad header/extent: extent tree corrupted - magic f30a, entries 7, max 340(340), depth 0(0)
[46670.827180] EXT4-fs error (device sda3): ext4_find_extent:915: inode #13801: comm java: pblk 1264786 bad header/extent: extent tree corrupted - magic f30a, entries 7, max 340(340), depth 0(0)
[46670.829354] EXT4-fs error (device sda3): ext4_find_extent:915: inode #13801: comm java: pblk 1264786 bad header/extent: extent tree corrupted - magic f30a, entries 7, max 340(340), depth 0(0)
[46670.832401] EXT4-fs error (device sda3): ext4_find_extent:915: inode #13801: comm java: pblk 1264786 bad header/extent: extent tree corrupted - magic f30a, entries 7, max 340(340), depth 0(0)
[46670.873848] EXT4-fs error (device sda3): ext4_find_extent:915: inode #13801: comm java: pblk 1264786 bad header/extent: extent tree corrupted - magic f30a, entries 7, max 340(340), depth 0(0)
[46670.875858] EXT4-fs error (device sda3): ext4_find_extent:915: inode #13801: comm java: pblk 1264786 bad header/extent: extent tree corrupted - magic f30a, entries 7, max 340(340), depth 0(0)
[46670.895687] EXT4-fs error (device sda3): ext4_ext_remove_space:2995: inode #13801: comm java: pblk 1264786 bad header/extent: extent tree corrupted - magic f30a, entries 7, max 340(340), depth 0(0)
[46670.897079] EXT4-fs error (device sda3): ext4_evict_inode:292: comm java: couldn't truncate inode 13801 (err -74)
[46716.972472] audit: type=1400 audit(1529699363.572:154): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/nvidia/nvidia-application-profiles-390.48-rc" pid=30951 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[46716.978978] audit: type=1400 audit(1529699363.580:155): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/nvidia/nvidia-application-profiles-390.48-rc" pid=30951 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[46716.984766] audit: type=1400 audit(1529699363.584:156): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=30951 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[46716.984938] audit: type=1400 audit(1529699363.584:157): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=30951 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[46716.984975] audit: type=1400 audit(1529699363.584:158): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/dev/nvidiactl" pid=30951 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=0
[46716.985006] audit: type=1400 audit(1529699363.584:159): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/devices/system/memory/block_size_bytes" pid=30951 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[46716.985104] audit: type=1400 audit(1529699363.584:160): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=30951 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[46716.985218] audit: type=1400 audit(1529699363.584:161): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=30951 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[46716.985247] audit: type=1400 audit(1529699363.584:162): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/dev/nvidia-modeset" pid=30951 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=0
[46716.985304] audit: type=1400 audit(1529699363.584:163): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=30951 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[46716.986214] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[46716.986649] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[46739.457398] kauditd_printk_skb: 48 callbacks suppressed
[46739.457399] audit: type=1400 audit(1529699386.056:212): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/martin/.thunderbird/profiles.ini" pid=30950 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[46739.458250] audit: type=1400 audit(1529699386.056:213): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/martin/.thunderbird/4bg7nwmd.default/secmod.db" pid=30950 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[46739.458672] audit: type=1400 audit(1529699386.060:214): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/martin/.thunderbird/4bg7nwmd.default/cert8.db" pid=30950 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[46739.458675] audit: type=1400 audit(1529699386.060:215): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/martin/.thunderbird/4bg7nwmd.default/key3.db" pid=30950 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[47359.161845] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[47359.162193] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[47443.159299] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[47443.159878] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[47453.640882] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[47453.641284] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[52735.641065] wlp3s0: deauthenticating from e8:df:70:71:eb:92 by local choice (Reason: 3=DEAUTH_LEAVING)
[52735.651986] wlp3s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
[52735.652031] wlp3s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
[52735.732662] e1000e: enp0s31f6 NIC Link is Down
[52735.995725] PM: suspend entry (deep)
[52735.995726] PM: Syncing filesystems ... done.
[52738.068022] Freezing user space processes ... (elapsed 0.004 seconds) done.
[52738.072084] OOM killer disabled.
[52738.072085] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[52738.074074] Suspending console(s) (use no_console_suspend to debug)
[52738.236141] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[52738.237907] sd 0:0:0:0: [sda] Stopping disk
[52738.267112] e1000e: EEE TX LPI TIMER: 00000011
[52738.760379] ACPI: Preparing to enter system sleep state S3
[52739.047707] ACPI: EC: event blocked
[52739.047708] ACPI: EC: EC stopped
[52739.047709] PM: Saving platform NVS memory
[52739.047728] Disabling non-boot CPUs ...
[52739.065480] smpboot: CPU 1 is now offline
[52739.097435] smpboot: CPU 2 is now offline
[52739.120381] IRQ 123: no longer affine to CPU3
[52739.122151] smpboot: CPU 3 is now offline
[52739.144288] IRQ 126: no longer affine to CPU4
[52739.145311] smpboot: CPU 4 is now offline
[52739.173213] smpboot: CPU 5 is now offline
[52739.196142] IRQ 122: no longer affine to CPU6
[52739.196153] IRQ 130: no longer affine to CPU6
[52739.197171] smpboot: CPU 6 is now offline
[52739.220164] IRQ 128: no longer affine to CPU7
[52739.221191] smpboot: CPU 7 is now offline
[52739.225812] ACPI: Low-level resume complete
[52739.225911] ACPI: EC: EC started
[52739.225911] PM: Restoring platform NVS memory
[52739.226721] Enabling non-boot CPUs ...
[52739.226773] x86: Booting SMP configuration:
[52739.226773] smpboot: Booting Node 0 Processor 1 APIC 0x2
[52739.227230]  cache: parent cpu1 should not be sleeping
[52739.227428] CPU1 is up
[52739.227451] smpboot: Booting Node 0 Processor 2 APIC 0x4
[52739.227909]  cache: parent cpu2 should not be sleeping
[52739.228142] CPU2 is up
[52739.228167] smpboot: Booting Node 0 Processor 3 APIC 0x6
[52739.228625]  cache: parent cpu3 should not be sleeping
[52739.228840] CPU3 is up
[52739.228860] smpboot: Booting Node 0 Processor 4 APIC 0x1
[52739.229345]  cache: parent cpu4 should not be sleeping
[52739.229585] CPU4 is up
[52739.229616] smpboot: Booting Node 0 Processor 5 APIC 0x3
[52739.230072]  cache: parent cpu5 should not be sleeping
[52739.230345] CPU5 is up
[52739.230365] smpboot: Booting Node 0 Processor 6 APIC 0x5
[52739.230823]  cache: parent cpu6 should not be sleeping
[52739.231119] CPU6 is up
[52739.231137] smpboot: Booting Node 0 Processor 7 APIC 0x7
[52739.231598]  cache: parent cpu7 should not be sleeping
[52739.231873] CPU7 is up
[52739.237813] ACPI: Waking up from system sleep state S3
[52739.786965] ACPI: EC: event unblocked
[52739.787160] sd 0:0:0:0: [sda] Starting disk
[52740.075114] usb 1-9: reset full-speed USB device number 6 using xhci_hcd
[52740.101497] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[52740.102334] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[52740.102336] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[52740.163097] ata1.00: NCQ Send/Recv Log not supported
[52740.163344] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[52740.163346] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[52740.163543] ata1.00: NCQ Send/Recv Log not supported
[52740.163545] ata1.00: configured for UDMA/133
[52740.173655] ata1.00: Enabling discard_zeroes_data
[52740.351314] usb 1-6: reset full-speed USB device number 10 using xhci_hcd
[52740.430863] thinkpad_acpi: EC reports that Thermal Table has changed
[52740.502263] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[52740.536143] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[52740.536601] thinkpad_acpi: EC reports that Thermal Table has changed
[52740.627252] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[52740.814342] OOM killer enabled.
[52740.814343] Restarting tasks ... done.
[52740.829201] thermal thermal_zone2: failed to read out thermal zone (-61)
[52740.845961] PM: suspend exit
[52740.868609] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[52741.055137] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[52741.056014] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[52741.307779] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[52741.371853] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[52741.503425] [drm] RC6 on
[52744.438617] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[52744.438695] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[52744.782976] wlp3s0: authenticate with e8:df:70:71:eb:92
[52744.790089] wlp3s0: send auth to e8:df:70:71:eb:92 (try 1/3)
[52744.800777] wlp3s0: authenticated
[52744.802930] wlp3s0: associate with e8:df:70:71:eb:92 (try 1/3)
[52744.815973] wlp3s0: RX AssocResp from e8:df:70:71:eb:92 (capab=0x431 status=0 aid=2)
[52744.829518] wlp3s0: associated
[52744.855536] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[52851.993397] nvidia-modeset: Allocated GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[52851.993692] nvidia-modeset: Freed GPU:0 (GPU-70a3dd6e-6d40-36fa-04ae-0bef1fdba114) @ PCI:0000:02:00.0
[54060.661653] usb 1-1: USB disconnect, device number 22
[54061.702338] xhci_hcd 0000:00:14.0: xHCI host controller not responding, assume dead
[54061.702356] xhci_hcd 0000:00:14.0: HC died; cleaning up
[54062.208330] usb 1-6: USB disconnect, device number 10
[54062.209114] usb 1-8: USB disconnect, device number 5
[54062.209844] usb 1-9: USB disconnect, device number 6

Revision history for this message

Kai-Heng Feng (kaihengfeng) wrote on 2018-06-27:

#42

For those who see "xhci_hcd 0000:00:14.0: xHCI host controller not responding, assume dead" in the dmesg, please subscribe to LP: #1763594.

I am building a test kernel for that bug.

Revision history for this message

Jeremy David Parsons (ubuntu-jeremyparsons) wrote on 2018-08-08:

#43

Download full text (3.5 KiB)

My HP Intel laptop drops all USB ports when I use the Bluetooth Internet connection for 30 minutes or so after a wake. I notice that the laptop also seems to be using power whilst suspended sometimes and Hibernate doesn't work. I'm running 18.04 Ubuntu Mate. rmmod and modprobe didn't revive anything on the usual modules but some self reference so cannot easily be removed.

Here is dmesg immediately after the bluetooth connection is lost:

[39669.384218] ata2.00: configured for UDMA/133
[39669.466221] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[39669.490467] r8169 0000:03:00.0 eno1: link down
[39669.490580] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[39669.491931] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[39669.609788] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[39669.677970] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[39795.587223] xhci_hcd 0000:00:14.0: Root hub is not suspended
[39798.567935] xhci_hcd 0000:00:14.0: xHC is not running.
[39798.644797] Bluetooth: hci0: ACL packet for unknown connection handle 256
[39801.599009] xhci_hcd 0000:00:14.0: xHC is not running.
[39930.151365] xhci_hcd 0000:00:14.0: Root hub is not suspended
[39951.299946] xhci_hcd 0000:00:14.0: Root hub is not suspended
[39954.175628] xhci_hcd 0000:00:14.0: Root hub is not suspended
[39964.351385] xhci_hcd 0000:00:14.0: Root hub is not suspended
[39969.676926] xhci_hcd 0000:00:14.0: Root hub is not suspended
[39997.547921] xhci_hcd 0000:00:14.0: Root hub is not suspended
[40007.545234] xhci_hcd 0000:00:14.0: Root hub is not suspended
[40578.991313] xhci_hcd 0000:00:14.0: Root hub is not suspended
[40916.053930] xhci_hcd 0000:00:14.0: xHC is not running.
[40916.065492] xhci_hcd 0000:00:14.0: xHCI host controller not responding, assume dead
[40916.065504] xhci_hcd 0000:00:14.0: HC died; cleaning up
[40918.489785] usb 1-4: USB disconnect, device number 3
[40918.490068] usb 1-7: USB disconnect, device number 4

lspci
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #6 (rev f1)
00:1c.6 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #7 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 Unassigned class [ff00]: Realtek Semi...

System76

USB stops working after a while (xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command)

Bug Description

Other bug subscribers

Bug attachments

Remote bug watches

Affects		Status	Importance	Assigned to	Milestone
	System76	Triaged	High	Unassigned
	linux (Ubuntu)	Triaged	High	Unassigned