PC SN720 NVMe WDC 256GB consumes more power in S2Idle than during long idle

Node SN Model Namespace Usage Format FW Rev
---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- --------
/dev/nvme0n1 182940620027 PC SN720 NVMe WDC 256GB 1 256.06 GB / 256.06 GB 512 B + 0 B 10101012

3b:00.0 Non-Volatile memory controller [0108]: Sandisk Corp Device [15b7:5002] (prog-if 02 [NVM Express])
 Subsystem: Sandisk Corp Device [15b7:5002]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 16
 NUMA node: 0
 Region 0: Memory at cc100000 (64-bit, non-prefetchable) [size=16K]
 Region 4: Memory at cc104000 (64-bit, non-prefetchable) [size=256]
 Capabilities: [80] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+
  Address: 0000000000000000 Data: 0000
 Capabilities: [b0] MSI-X: Enable+ Count=65 Masked-
  Vector table: BAR=0 offset=00002000
  PBA: BAR=4 offset=00000000
 Capabilities: [c0] Express (v2) Endpoint, MSI 00
  DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 unlimited
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
   MaxPayload 256 bytes, MaxReadReq 512 bytes
  DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
  LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L0s <256ns, L1 <8us
   ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
  LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
   ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 8GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR+, OBFF Not Supported
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
  LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+
    EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
 Capabilities: [100 v2] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
 Capabilities: [150 v1] Device Serial Number 00-00-00-00-00-00-00-00
 Capabilities: [1b8 v1] Latency Tolerance Reporting
  Max snoop latency: 3145728ns
  Max no snoop latency: 3145728ns
 Capabilities: [300 v1] #19
 Capabilities: [900 v1] L1 PM Substates
  L1SubCap: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- L1_PM_Substates+
     PortCommonModeRestoreTime=255us PortTPowerOnTime=10us
  L1SubCtl1: PCI-PM...

This bug is awaiting verification that the kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-bionic' to 'verification-done-bionic'. If the problem still exists, change the tag 'verification-needed-bionic' to 'verification-failed-bionic'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

This bug was fixed in the package linux-oem - 4.15.0-1030.35

---------------
linux-oem (4.15.0-1030.35) bionic; urgency=medium

  * linux-oem: 4.15.0-1030.35 -proposed tracker (LP: #1806663)

  * Add HMS CAN driver for Dell Edge Gateways (LP: #1807339)
    - SAUCE: (no-up) add IXXAT USB-to-CAN driver

  * Add support for 0cf3:535b QCA_ROME device (LP: #1807333)
    - Bluetooth: btusb: Add support for 0cf3:535b QCA_ROME device

  * Add support for Dell DW5821e WWAN/GPS module (LP: #1807342)
    - qmi_wwan: add support for the Dell Wireless 5821e module
    - qmi_wwan: fix interface number for DW5821e production firmware
    - USB: option: add support for DW5821e

  * Fix Terminus USB hub that may breaks connected USB devices after S3
    (LP: #1806850)
    - USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub

  * The line-out on the Dell Dock station can't work (LP: #1806532)
    - ALSA: usb-audio: Allow to override the longname string
    - ALSA: usb-audio: Give proper vendor/product name for Dell WD15 Dock
    - ALSA: usb-audio: Add vendor and product name for Dell WD19 Dock

  * Enable new Realtek card reader (LP: #1806335)
    - USB: usb-storage: Add new IDs to ums-realtek
    - SAUCE: (noup) USB: usb-storage: Make MMC support optional on ums-realtek

  [ Ubuntu: 4.15.0-43.46 ]

  * linux: 4.15.0-43.46 -proposed tracker (LP: #1806659)
  * System randomly hangs during suspend when mei_wdt is loaded (LP: #1803942)
    - SAUCE: base/dd: limit release function changes to vfio driver only
  * Workaround CSS timeout on AMD SNPS 3.0 xHC (LP: #1806838)
    - xhci: Allow more than 32 quirks
    - xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
  * linux-buildinfo: pull out ABI information into its own package
    (LP: #1806380)
    - [Packaging] limit preparation to linux-libc-dev in headers
    - [Packaging] commonise debhelper invocation
    - [Packaging] ABI -- accumulate abi information at the end of the build
    - [Packaging] buildinfo -- add basic build information
    - [Packaging] buildinfo -- add firmware information to the flavour ABI
    - [Packaging] buildinfo -- add compiler information to the flavour ABI
    - [Packaging] buildinfo -- add buildinfo support to getabis
    - [Config] buildinfo -- add retpoline version markers
  * linux packages should own /usr/lib/linux/triggers (LP: #1770256)
    - [Packaging] own /usr/lib/linux/triggers
  * CVE-2018-12896
    - posix-timers: Sanitize overrun handling
  * CVE-2018-16276
    - USB: yurex: fix out-of-bounds uaccess in read handler
  * CVE-2018-10902
    - ALSA: rawmidi: Change resized buffers atomically
  * CVE-2018-18710
    - cdrom: fix improper type cast, which can leat to information leak.
  * CVE-2018-18690
    - xfs: don't fail when converting shortform attr to long form during
      ATTR_REPLACE
  * CVE-2018-14734
    - infiniband: fix a possible use-after-free bug
  * CVE-2018-18445
    - bpf: 32-bit RSH verification must truncate input before the ALU op
  * Packaging resync (LP: #1786013)
    - [Packaging] update helper scripts

 -- Chia-Lin Kao (AceLan) <email address hidden> Sat, 08 Dec 2018 11:02:54 +0800

This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window:

apport-collect 1805775

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the Ubuntu Kernel Team.

This bug is awaiting verification that the kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-cosmic' to 'verification-done-cosmic'. If the problem still exists, change the tag 'verification-needed-cosmic' to 'verification-failed-cosmic'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

This bug was fixed in the package linux - 4.15.0-44.47

---------------
linux (4.15.0-44.47) bionic; urgency=medium

  * linux: 4.15.0-44.47 -proposed tracker (LP: #1811419)

  * Packaging resync (LP: #1786013)
    - [Packaging] update helper scripts

  * CPU hard lockup with rigorous writes to NVMe drive (LP: #1810998)
    - blk-wbt: pass in enum wbt_flags to get_rq_wait()
    - blk-wbt: Avoid lock contention and thundering herd issue in wbt_wait
    - blk-wbt: move disable check into get_limit()
    - blk-wbt: use wq_has_sleeper() for wq active check
    - blk-wbt: fix has-sleeper queueing check
    - blk-wbt: abstract out end IO completion handler
    - blk-wbt: improve waking of tasks

  * To reduce the Realtek USB cardreader power consumption (LP: #1811337)
    - mmc: sdhci: Disable 1.8v modes (HS200/HS400/UHS) if controller can't support
      1.8v
    - mmc: core: Introduce MMC_CAP_SYNC_RUNTIME_PM
    - mmc: rtsx_usb_sdmmc: Don't runtime resume the device while changing led
    - mmc: rtsx_usb: Use MMC_CAP2_NO_SDIO
    - mmc: rtsx_usb: Enable MMC_CAP_ERASE to allow erase/discard/trim requests
    - mmc: rtsx_usb_sdmmc: Re-work runtime PM support
    - mmc: rtsx_usb_sdmmc: Re-work card detection/removal support
    - memstick: rtsx_usb_ms: Add missing pm_runtime_disable() in probe function
    - misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection
    - memstick: Prevent memstick host from getting runtime suspended during card
      detection
    - memstick: rtsx_usb_ms: Use ms_dev() helper
    - memstick: rtsx_usb_ms: Support runtime power management

  * Support non-strict iommu mode on arm64 (LP: #1806488)
    - iommu/io-pgtable-arm: Fix race handling in split_blk_unmap()
    - iommu/arm-smmu-v3: Implement flush_iotlb_all hook
    - iommu/dma: Add support for non-strict mode
    - iommu: Add "iommu.strict" command line option
    - iommu/io-pgtable-arm: Add support for non-strict mode
    - iommu/arm-smmu-v3: Add support for non-strict mode
    - iommu/io-pgtable-arm-v7s: Add support for non-strict mode
    - iommu/arm-smmu: Support non-strict mode

  * ELAN900C:00 04F3:2844 touchscreen doesn't work (LP: #1811335)
    - pinctrl: cannonlake: Fix community ordering for H variant
    - pinctrl: cannonlake: Fix HOSTSW_OWN register offset of H variant

  * Add Cavium ThunderX2 SoC UNCORE PMU driver (LP: #1811200)
    - perf: Export perf_event_update_userpage
    - Documentation: perf: Add documentation for ThunderX2 PMU uncore driver
    - drivers/perf: Add Cavium ThunderX2 SoC UNCORE PMU driver
    - [Config] New config CONFIG_THUNDERX2_PMU=m

  * Update hisilicon SoC-specific drivers (LP: #1810457)
    - SAUCE: Revert "net: hns3: Updates RX packet info fetch in case of multi BD"
    - Revert "UBUNTU: SAUCE: {topost} net: hns3: separate roce from nic when
      resetting"
    - Revert "UBUNTU: SAUCE: {topost} net: hns3: Use roce handle when calling roce
      callback function"
    - Revert "UBUNTU: SAUCE: {topost} net: hns3: Add calling roce callback
      function when link status change"
    - Revert "UBUNTU: SAUCE: {topost} net: hns3: optimize the process of notifying
      roce client"
    - Revert "UBUNTU: S...

This bug was fixed in the package linux - 4.18.0-14.15

---------------
linux (4.18.0-14.15) cosmic; urgency=medium

  * linux: 4.18.0-14.15 -proposed tracker (LP: #1811406)

  * CPU hard lockup with rigorous writes to NVMe drive (LP: #1810998)
    - blk-wbt: Avoid lock contention and thundering herd issue in wbt_wait
    - blk-wbt: move disable check into get_limit()
    - blk-wbt: use wq_has_sleeper() for wq active check
    - blk-wbt: fix has-sleeper queueing check
    - blk-wbt: abstract out end IO completion handler
    - blk-wbt: improve waking of tasks

  * To reduce the Realtek USB cardreader power consumption (LP: #1811337)
    - mmc: core: Introduce MMC_CAP_SYNC_RUNTIME_PM
    - mmc: rtsx_usb_sdmmc: Don't runtime resume the device while changing led
    - mmc: rtsx_usb_sdmmc: Re-work runtime PM support
    - mmc: rtsx_usb_sdmmc: Re-work card detection/removal support
    - memstick: rtsx_usb_ms: Add missing pm_runtime_disable() in probe function
    - misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection
    - memstick: Prevent memstick host from getting runtime suspended during card
      detection
    - memstick: rtsx_usb_ms: Use ms_dev() helper
    - memstick: rtsx_usb_ms: Support runtime power management

  * Support non-strict iommu mode on arm64 (LP: #1806488)
    - iommu/io-pgtable-arm: Fix race handling in split_blk_unmap()
    - iommu/arm-smmu-v3: Implement flush_iotlb_all hook
    - iommu/dma: Add support for non-strict mode
    - iommu: Add "iommu.strict" command line option
    - iommu/io-pgtable-arm: Add support for non-strict mode
    - iommu/arm-smmu-v3: Add support for non-strict mode
    - iommu/io-pgtable-arm-v7s: Add support for non-strict mode
    - iommu/arm-smmu: Support non-strict mode

  * [Regression] crashkernel fails on HiSilicon D05 (LP: #1806766)
    - efi: honour memory reservations passed via a linux specific config table
    - efi/arm: libstub: add a root memreserve config table
    - efi: add API to reserve memory persistently across kexec reboot
    - irqchip/gic-v3-its: Change initialization ordering for LPIs
    - irqchip/gic-v3-its: Simplify LPI_PENDBASE_SZ usage
    - irqchip/gic-v3-its: Split property table clearing from allocation
    - irqchip/gic-v3-its: Move pending table allocation to init time
    - irqchip/gic-v3-its: Keep track of property table's PA and VA
    - irqchip/gic-v3-its: Allow use of pre-programmed LPI tables
    - irqchip/gic-v3-its: Use pre-programmed redistributor tables with kdump
      kernels
    - irqchip/gic-v3-its: Check that all RDs have the same property table
    - irqchip/gic-v3-its: Register LPI tables with EFI config table
    - irqchip/gic-v3-its: Allow use of LPI tables in reserved memory
    - arm64: memblock: don't permit memblock resizing until linear mapping is up
    - efi/arm: Defer persistent reservations until after paging_init()
    - efi: Permit calling efi_mem_reserve_persistent() from atomic context
    - efi: Prevent GICv3 WARN() by mapping the memreserve table before first use

  * ELAN900C:00 04F3:2844 touchscreen doesn't work (LP: #1811335)
    - pinctrl: cannonlake: Fix community ordering for H variant
    - pinctrl: c...

This bug was fixed in the package linux - 4.19.0-12.13

---------------
linux (4.19.0-12.13) disco; urgency=medium

  * linux: 4.19.0-12.13 -proposed tracker (LP: #1813664)

  * kernel oops in bcache module (LP: #1793901)
    - SAUCE: bcache: never writeback a discard operation

  * Disco update: 4.19.18 upstream stable release (LP: #1813611)
    - ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address
    - mlxsw: spectrum: Disable lag port TX before removing it
    - mlxsw: spectrum_switchdev: Set PVID correctly during VLAN deletion
    - net: dsa: mv88x6xxx: mv88e6390 errata
    - net, skbuff: do not prefer skb allocation fails early
    - qmi_wwan: add MTU default to qmap network interface
    - ipv6: Take rcu_read_lock in __inet6_bind for mapped addresses
    - net: clear skb->tstamp in bridge forwarding path
    - netfilter: ipset: Allow matching on destination MAC address for mac and
      ipmac sets
    - gpio: pl061: Move irq_chip definition inside struct pl061
    - drm/amd/display: Guard against null stream_state in set_crc_source
    - drm/amdkfd: fix interrupt spin lock
    - ixgbe: allow IPsec Tx offload in VEPA mode
    - platform/x86: asus-wmi: Tell the EC the OS will handle the display off
      hotkey
    - e1000e: allow non-monotonic SYSTIM readings
    - usb: typec: tcpm: Do not disconnect link for self powered devices
    - selftests/bpf: enable (uncomment) all tests in test_libbpf.sh
    - of: overlay: add missing of_node_put() after add new node to changeset
    - writeback: don't decrement wb->refcnt if !wb->bdi
    - serial: set suppress_bind_attrs flag only if builtin
    - bpf: Allow narrow loads with offset > 0
    - ALSA: oxfw: add support for APOGEE duet FireWire
    - x86/mce: Fix -Wmissing-prototypes warnings
    - MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSur
    - crypto: ecc - regularize scalar for scalar multiplication
    - arm64: perf: set suppress_bind_attrs flag to true
    - drm/atomic-helper: Complete fake_commit->flip_done potentially earlier
    - clk: meson: meson8b: fix incorrect divider mapping in cpu_scale_table
    - samples: bpf: fix: error handling regarding kprobe_events
    - usb: gadget: udc: renesas_usb3: add a safety connection way for
      forced_b_device
    - fpga: altera-cvp: fix probing for multiple FPGAs on the bus
    - selinux: always allow mounting submounts
    - ASoC: pcm3168a: Don't disable pcm3168a when CONFIG_PM defined
    - scsi: qedi: Check for session online before getting iSCSI TLV data.
    - drm/amdgpu: Reorder uvd ring init before uvd resume
    - rxe: IB_WR_REG_MR does not capture MR's iova field
    - efi/libstub: Disable some warnings for x86{,_64}
    - jffs2: Fix use of uninitialized delayed_work, lockdep breakage
    - clk: imx: make mux parent strings const
    - pstore/ram: Do not treat empty buffers as valid
    - media: uvcvideo: Refactor teardown of uvc on USB disconnect
    - powerpc/xmon: Fix invocation inside lock region
    - powerpc/pseries/cpuidle: Fix preempt warning
    - media: firewire: Fix app_info parameter type in avc_ca{,_app}_info
    - ASoC: use dma_ops of parent device for acp_audio_dma
    - media: ve...

This bug was fixed in the package linux-oem - 4.15.0-1033.38

---------------
linux-oem (4.15.0-1033.38) bionic; urgency=medium

  * linux-oem: 4.15.0-1033.38 -proposed tracker (LP: #1814241)

  * Packaging resync (LP: #1786013)
    - [Packaging] update update.conf

  [ Ubuntu: 4.15.0-45.48 ]

  * linux: 4.15.0-45.48 -proposed tracker (LP: #1813779)
  * External monitors does not work anymore 4.15.0-44 (LP: #1813663)
    - SAUCE: Revert "drm/i915/dp: Send DPCD ON for MST before phy_up"
  * kernel 4.15.0-44 cannot mount ext4 fs with meta_bg enabled (LP: #1813727)
    - ext4: fix false negatives *and* false positives in ext4_check_descriptors()

linux-oem (4.15.0-1032.37) bionic; urgency=medium

  * linux-oem: 4.15.0-1032.37 -proposed tracker (LP: #1811421)

  * Fix non-working pinctrl-intel (LP: #1811777)
    - pinctrl: intel: Implement intel_gpio_get_direction callback
    - pinctrl: intel: Do pin translation when lock IRQ
    - pinctrl: intel: Do pin translation in other GPIO operations as well
    - Revert "pinctrl: intel: Do pin translation when lock IRQ"

  * Fix not working Goodix touchpad (LP: #1811929)
    - HID: i2c-hid: Disable runtime PM on Goodix touchpad

  * Miscellaneous Ubuntu changes
    - [Config] update configs following rebase to 4.15.0-44.47

  [ Ubuntu: 4.15.0-44.47 ]

  * linux: 4.15.0-44.47 -proposed tracker (LP: #1811419)
  * Packaging resync (LP: #1786013)
    - [Packaging] update helper scripts
  * CPU hard lockup with rigorous writes to NVMe drive (LP: #1810998)
    - blk-wbt: pass in enum wbt_flags to get_rq_wait()
    - blk-wbt: Avoid lock contention and thundering herd issue in wbt_wait
    - blk-wbt: move disable check into get_limit()
    - blk-wbt: use wq_has_sleeper() for wq active check
    - blk-wbt: fix has-sleeper queueing check
    - blk-wbt: abstract out end IO completion handler
    - blk-wbt: improve waking of tasks
  * To reduce the Realtek USB cardreader power consumption (LP: #1811337)
    - mmc: sdhci: Disable 1.8v modes (HS200/HS400/UHS) if controller can't support
      1.8v
    - mmc: core: Introduce MMC_CAP_SYNC_RUNTIME_PM
    - mmc: rtsx_usb_sdmmc: Don't runtime resume the device while changing led
    - mmc: rtsx_usb: Use MMC_CAP2_NO_SDIO
    - mmc: rtsx_usb: Enable MMC_CAP_ERASE to allow erase/discard/trim requests
    - mmc: rtsx_usb_sdmmc: Re-work runtime PM support
    - mmc: rtsx_usb_sdmmc: Re-work card detection/removal support
    - memstick: rtsx_usb_ms: Add missing pm_runtime_disable() in probe function
    - misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection
    - memstick: Prevent memstick host from getting runtime suspended during card
      detection
    - memstick: rtsx_usb_ms: Use ms_dev() helper
    - memstick: rtsx_usb_ms: Support runtime power management
  * Support non-strict iommu mode on arm64 (LP: #1806488)
    - iommu/io-pgtable-arm: Fix race handling in split_blk_unmap()
    - iommu/arm-smmu-v3: Implement flush_iotlb_all hook
    - iommu/dma: Add support for non-strict mode
    - iommu: Add "iommu.strict" command line option
    - iommu/io-pgtable-arm: Add support for non-strict mode
    - iommu/arm-smmu-v3: Add support for non-strict mode
  ...