Dear Amarnath, Am Donnerstag, den 18.10.2012, 09:43 +0000 schrieb Amarnath Chitumalla: > As you mentioned library doesn't provide header file. good. Will the check be changed to test for the actual library? > "hp-check -r" check for cups-image packages (i.e. raster file), Why does it need `raster.h`? > then this may be due to either libcupsimage2 or libcupsimage2-dev, so it > displays both packages (i.e. libcupsimage2,libcupsimage2-dev) under this > section (i.e. cups-image). > > ------conf fie---------------------------------------- > [debian:x.x:cups-image] > packages=libcupsimage2,libcupsimage2-dev > ---------------------------------------------- It incorrectly lists one as missing! Missing Required Dependencies ----------------------------- error: 'libcupsimage2' package is missing/incompatible error: 'libcupsimage2-dev' package is missing/incompatible error: 'libsnmp-dev' package is missing/incompatible And two more packages as run-time dependencies although it should not need any development files. Here is the full output. $ hp-check -r HP Linux Imaging and Printing System (ver. 3.12.6) Dependency/Version Check Utility ver. 15 Copyright (c) 2001-14 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-version Saving output in log file: /tmp/hp-check.log Initializing. Please wait... warning: debian-unstable version is not supported. Using debian-6.0.5 versions dependencies to verify and install... --------------- | SYSTEM INFO | --------------- Kernel: 3.2.0-4-686-pae #1 SMP Debian 3.2.30-1 GNU/Linux Host: myhostname Proc: 3.2.0-4-686-pae #1 SMP Debian 3.2.30-1 GNU/Linux Distribution: debian unstable ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.12.6 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for debian distro unstable version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.12.6 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip-doc/HTML icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=yes foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.12.6 restricted-build=no ui-toolkit=qt4 qt3=no qt4=yes policy-kit=yes hpijs-only-build=no lite-build=no udev-acl-rules=yes udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no Current contents of '/var/lib/hp/hplip.state' file: Plugins are not installed. Could not access file: Datei oder Verzeichnis nicht gefunden Current contents of '~/.hplip/hplip.conf' file: [last_used] printer_name = Photosmart_2600_fax working_dir = . device_uri = "hp:/net/Photosmart_2600_series?ip=192.168.178.253" [commands] scan = /usr/bin/xsane -V %SANE_URI% [installation] version = 3.12.6 date_time = 18.10.2012 11:58:12 [settings] systray_messages = 0 systray_visible = 0 [fax] email_address = voice_phone = [refresh] rate = 30 enable = false type = 1 [polling] enable = false device_list = interval = 5 [upgrade] notify_upgrade = false last_upgraded_time = 1347430579.42431 pending_upgrade_time = 0 -------------------------- | External Dependencies | -------------------------- gs Ghostscript REQUIRED 7.05 9.05 OK - network Network-wget OPTIONAL - 1.14 OK - dbus DBus REQUIRED - 1.6.8 OK - scanimage Shell-Scanning OPTIONAL 1.0 1.0.22 OK - policykit Admin-Policy-framework OPTIONAL - 0.105 OK - xsane SANE-GUI OPTIONAL 0.9 0.998 OK - cups CUPS REQUIRED 1.1 1.5.3 OK 'CUPS Scheduler is running' ------------------------- | General Dependencies | ------------------------- reportlab Python-PDF-Lib OPTIONAL 2.0 2.5 OK - libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK - pil Python-Image-Lib OPTIONAL - 1.1.7 OK - pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.9.3 OK - libjpeg JPEG-Lib REQUIRED - - OK - libpthread POSIX-Threads-Lib REQUIRED - 2.13 OK - python-dbus Python-DBUS REQUIRED 0.80.0 1.1.1 OK - python-devel Python-SDK REQUIRED 2.2 2.7.3 OK - pyqt4 Python-Qt4 REQUIRED 4.0 4.9.3 OK - cups-devel CUPS-SDK REQUIRED - 1.5.3 OK - sane-devel SANE-SDK REQUIRED - 1.0.22 OK - libusb USB-Lib REQUIRED - 1.0 OK - sane Scan-Lib REQUIRED - 1.0.22 OK - error: cups-image CUPS-Image-Lib REQUIRED - 1.5.3 MISSING 'cups-image needs to be installed' error: libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.4.3 MISSING 'libnetsnmp-devel needs to be installed' python-xml Python-XML-Lib REQUIRED - 2.1.0 OK - python-notify Desktop-notifications OPTIONAL - - OK - ---------------------- | Python Extentions | ---------------------- cupsext CUPS-Extension REQUIRED - 3.12.6 OK - pcardext PhotoCard-Extension REQUIRED - 3.12.6 OK - hpmudext IO-Extension REQUIRED - 3.12.6 OK - ----------------------- | Scan Configuration | ----------------------- hpaio HPLIP-SANE-Backend REQUIRED - 3.12.6 OK 'hpaio found in /etc/sane.d/dll.conf' scanext Scan-SANE-Extension REQUIRED - 3.12.6 OK - ------------------------------ | DISCOVERED SCANNER DEVICES | ------------------------------ WARNING: gnome-keyring:: couldn't connect to: /home/joey/.cache/keyring-F9p6TI/pkcs11: No such file or directory device `hpaio:/net/Photosmart_2600_series?ip=192.168.178.253' is a Hewlett-Packard Photosmart_2600_series all-in-one -------------------------- | DISCOVERED USB DEVICES | -------------------------- No devices found. --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- WARNING ------- Type: Unknown Device URI: gnome-keyring:: couldn't connect to: /home/joey/.cache/keyring-F9p6TI/pkcs11: Datei oder Verzeichnis nicht gefunden Photosmart_2600 --------------- Type: Printer Device URI: hp:/net/Photosmart_2600_series?ip=192.168.178.253 PPD: /etc/cups/ppd/Photosmart_2600.ppd PPD Description: HP PhotoSmart 2600 Foomatic/hpijs (recommended) - HPLIP 2.7.10 printer Photosmart_2600 is idle. enabled since Mo 03 Sep 2012 23:18:54 CESTche/keyring-F9p6TI/pkcs11: Datei oder Verzeichnis nicht gefunden HP Linux Imaging and Printing System (ver. 3.12.6) System Tray Status Service ver. 2.0 Copyright (c) 2001-14 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. WARNING: gnome-keyring:: couldn't connect to: /home/joey/.cache/keyring-F9p6TI/pkcs11: Datei oder Verzeichnis nicht gefunden /usr/lib/python2.7/dist-packages/gtk-2.0/gtk/__init__.py:127: RuntimeWarning: PyOS_InputHook is not available for interactive use of PyGTK set_interactive(1) WARNING: gnome-keyring:: couldn't connect to: /home/joey/.cache/keyring-F9p6TI/pkcs11: Datei oder Verzeichnis nicht gefunden error: Unable to communicate with device (code=12): hp:/net/Photosmart_2600_series?ip=192.168.178.253 error: unable to open channel error: Communication status: Failed Photosmart_2600_fax ------------------- Type: Fax Device URI: hpfax:/net/Photosmart_2600_series?ip=192.168.178.253 PPD: /etc/cups/ppd/Photosmart_2600_fax.ppd PPD Description: HP Fax - HPLIP 2.7.10 printer Photosmart_2600_fax is idle. enabled since Fr 21 Jan 2011 17:05:47 CET/keyring-F9p6TI/pkcs11: Datei oder Verzeichnis nicht gefunden error: Unable to communicate with device (code=12): hpfax:/net/Photosmart_2600_series?ip=192.168.178.253 error: unable to open channel error: Communication status: Failed -------------- | PERMISSION | -------------- groups user-groups Required - - OK joey adm lp dialout cdrom floppy audio src video plugdev users lpadmin cyberjack libvirt pulse-rt vdr ----------- | SELINUX | ----------- SELinux disabled Optional - - OK - ----------- | SUMMARY | ----------- Missing Required Dependencies ----------------------------- error: 'libcupsimage2' package is missing/incompatible error: 'libcupsimage2-dev' package is missing/incompatible error: 'libsnmp-dev' package is missing/incompatible Missing Optional Dependencies ----------------------------- None Total Errors: 5 Total Warnings: 0 Re-run 'hp-check --fix' command to prompt and fix the issues. Done.