my sata hard drive when booting on the quickstart board with 11.11 RC, ubuntu-desktop image is not there.
linaro@linaro-ubuntu-desktop:~$ fdisk /dev/sda
fdisk: unable to open /dev/sda: No such file or directory
dmesg:
linaro@linaro-ubuntu-desktop:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.1.0-1002-linaro-lt-mx5 (buildd@gourd) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #7-Ubuntu PREEMPT Tue Nov 15 13:07:56 UTC 2011
[ 0.000000] CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c5387f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Freescale MX53 LOCO Board, model: Freescale i.MX53 LOCO
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 245760
[ 0.000000] free_area_init_node: node 0, pgdat 808a7bc0, node_mem_map 80e40000
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 242688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 242688
[ 0.000000] Kernel command line: console=tty0 console=ttymxc0,115200n8 root=UUID=b10815c6-a3d0-4ef5-a4a8-c9f04b00efb0 rootwait ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 512MB 448MB = 960MB total
[ 0.000000] Memory: 957508k/957508k available, 91068k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xf4000000 ( 312 MB)
[ 0.000000] lowmem : 0x80000000 - 0xe0000000 (1536 MB)
[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
[ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
[ 0.000000] .text : 0x80008000 - 0x807f708c (8125 kB)
[ 0.000000] .init : 0x807f8000 - 0x80848000 ( 320 kB)
[ 0.000000] .data : 0x80848000 - 0x808aa0b0 ( 393 kB)
[ 0.000000] .bss : 0x808aa0d4 - 0x80e3f3b8 (5717 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:400
[ 0.000000] TrustZone Interrupt Controller (TZIC) initialized
[ 0.000000] sched_clock: 32 bits at 8MHz, resolution 125ns, wraps every 536870ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.003217] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[ 0.090429] pid_max: default: 32768 minimum: 301
[ 0.090843] Security Framework initialized
[ 0.091001] AppArmor: AppArmor initialized
[ 0.091167] Mount-cache hash table entries: 512
[ 0.095618] CPU: Testing write buffer coherency: ok
[ 0.095820] ftrace: allocating 21736 entries in 64 pages
[ 0.122385] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.125952] devtmpfs: initialized
[ 0.136026] print_constraints: dummy:
[ 0.137754] NET: Registered protocol family 16
[ 0.185511] No ATAGs?
[ 0.185550] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.186879] IMX usb wakeup probe
[ 0.187437] the wakeup pdata is 0x80859ce0
[ 0.187506] IMX usb wakeup probe
[ 0.187952] the wakeup pdata is 0x80859dc4
[ 0.254097] bio: create slab <bio-0> at 0
[ 0.260193] SCSI subsystem initialized
[ 0.261691] libata version 3.00 loaded.
[ 0.265380] usbcore: registered new interface driver usbfs
[ 0.266278] usbcore: registered new interface driver hub
[ 0.266997] usbcore: registered new device driver usb
[ 0.273766] da9052_i2c_is_connected - i2c read success..............
[ 0.275642] print_constraints: VDDA: 3200 mV
[ 0.283866] print_constraints: DA9052_LDO1: 600 <--> 1800 mV at 1300 mV normal
[ 0.285570] print_constraints: DA9052_LDO2: 600 <--> 1800 mV at 1300 mV normal
[ 0.287210] print_constraints: DA9052_LDO3: 1725 <--> 3300 mV at 3300 mV normal
[ 0.288742] print_constraints: DA9052_LDO4: 1725 <--> 3300 mV at 2775 mV normal
[ 0.290359] print_constraints: DA9052_LDO5: 1200 <--> 3600 mV at 1300 mV normal
[ 0.291882] print_constraints: DA9052_LDO6: 1200 <--> 3600 mV at 1300 mV normal
[ 0.293976] print_constraints: DA9052_LDO7: 1200 <--> 3600 mV at 2750 mV normal
[ 0.295544] print_constraints: DA9052_LDO8: 1200 <--> 3600 mV at 1800 mV normal
[ 0.297119] print_constraints: DA9052_LDO9: 1250 <--> 3650 mV at 1500 mV normal
[ 0.298715] print_constraints: DA9052_LDO10: 1200 <--> 3600 mV at 1300 mV normal
[ 0.300254] print_constraints: DA9052_BUCK_CORE: 500 <--> 2075 mV at 1250 mV normal
[ 0.301855] print_constraints: DA9052_BUCK_PRO: 500 <--> 2075 mV at 1350 mV normal
[ 0.303736] print_constraints: DA9052_BUCK_MEM: 925 <--> 2500 mV at 1500 mV normal
[ 0.305374] print_constraints: DA9052_BUCK_PERI: 925 <--> 2500 mV at 2475 mV normal
[ 0.332784] imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[ 0.337076] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.340370] NetLabel: Initializing
[ 0.340416] NetLabel: domain hash size = 128
[ 0.340441] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.340707] NetLabel: unlabeled traffic allowed by default
[ 0.340803] Switching to clocksource mxc_timer1
[ 0.342764] Switched to NOHz mode on CPU #0
[ 0.403886] AppArmor: AppArmor Filesystem Enabled
[ 0.461798] NET: Registered protocol family 2
[ 0.462349] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.463864] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.466362] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
[ 0.495958] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.496109] TCP reno registered
[ 0.496163] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.496677] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.497738] NET: Registered protocol family 1
[ 0.499056] RPC: Registered named UNIX socket transport module.
[ 0.499107] RPC: Registered udp transport module.
[ 0.499136] RPC: Registered tcp transport module.
[ 0.499164] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.499876] Trying to unpack rootfs image as initramfs...
[ 0.633384] Freeing initrd memory: 1820K
[ 0.634810] Bus freq driver module loaded
[ 0.635383] sdram autogating driver module loaded
[ 0.635777] i.MXC CPU frequency driver
[ 0.637408] DVFS driver module loaded
[ 0.640313] audit: initializing netlink socket (disabled)
[ 0.640613] type=2000 audit(0.600:1): initialized
[ 0.720446] Kprobe smoke test started
[ 0.736532] Kprobe smoke test passed successfully
[ 0.767007] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.769877] Btrfs loaded
[ 0.769982] msgmni has been set to 1873
[ 0.774004] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.774193] io scheduler noop registered
[ 0.774227] io scheduler deadline registered
[ 0.774401] io scheduler cfq registered (default)
[ 0.777974] mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi
[ 0.811648] sii902x 1-0039: cound not find device
[ 0.814015] mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver failed with -22
[ 0.814157] mxc_sdc_fb: probe of mxc_sdc_fb.0 failed with error -22
[ 0.814265] mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver vga
[ 0.814493] _regulator_get: get() with no identifier
[ 0.815635] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9
[ 0.815654] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9
[ 0.850966] imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
[ 0.907099] Console: switching to colour frame buffer device 128x48
[ 0.912942] imx-ipuv3 imx-ipuv3.0: Channel already disabled 10
[ 0.912960] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 10
[ 0.917407] imx-sdma imx35-sdma: loaded firmware 1.0
[ 0.936867] imx-sdma imx35-sdma: initialized
[ 0.938645] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.021514] Serial: IMX driver
[ 1.022078] imx21-uart.0: ttymxc0 at MMIO 0x53fbc000 (irq = 31) is a IMX
[ 1.755641] console [ttymxc0] enabled
[ 1.800362] brd: module loaded
[ 1.821327] loop: module loaded
[ 1.829352] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.842108] FEC Ethernet Driver
[ 1.863087] fec_enet_mii_bus: probed
[ 1.873312] usbcore: registered new interface driver asix
[ 1.881893] usbcore: registered new interface driver cdc_ether
[ 1.890735] usbcore: registered new interface driver smsc95xx
[ 1.899483] usbcore: registered new interface driver net1080
[ 1.908141] usbcore: registered new interface driver cdc_subset
[ 1.916991] usbcore: registered new interface driver zaurus
[ 1.925106] cdc_ncm: 04-Aug-2011
[ 1.931112] usbcore: registered new interface driver cdc_ncm
[ 1.941053] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.950050] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 1.950296] initializing FSL-SOC USB Controller
[ 2.050921] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[ 2.062960] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 1
[ 2.073471] fsl-ehci fsl-ehci.1: reset hcs_params 0x10011 dbg=0 ind cc=0 pcc=0 ordered ports=1
[ 2.073495] fsl-ehci fsl-ehci.1: reset hcc_params 0006 thresh 0 uframes 256/512/1024 park
[ 2.073791] fsl-ehci fsl-ehci.1: park 0
[ 2.073816] fsl-ehci fsl-ehci.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 2.073834] fsl-ehci fsl-ehci.1: ...powerdown ports...
[ 2.100899] fsl-ehci fsl-ehci.1: supports USB remote wakeup
[ 2.100968] fsl-ehci fsl-ehci.1: irq 14, io base 0x53f80200
[ 2.108987] fsl-ehci fsl-ehci.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 2.120940] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
[ 2.129852] usb usb1: default language 0x0409
[ 2.129943] usb usb1: udev 1, busnum 1, minor = 0
[ 2.129957] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.139158] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.148715] usb usb1: Product: Freescale On-Chip EHCI Host Controller
[ 2.157634] usb usb1: Manufacturer: Linux 3.1.0-1002-linaro-lt-mx5 ehci_hcd
[ 2.167018] usb usb1: SerialNumber: fsl-ehci.1
[ 2.176421] usb usb1: usb_probe_device
[ 2.176446] usb usb1: configuration #1 chosen from 1 choice
[ 2.177009] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.178267] hub 1-0:1.0: usb_probe_interface
[ 2.178289] hub 1-0:1.0: usb_probe_interface - got id
[ 2.178323] hub 1-0:1.0: USB hub found
[ 2.184886] hub 1-0:1.0: 1 port detected
[ 2.191224] hub 1-0:1.0: standalone hub
[ 2.191239] hub 1-0:1.0: individual port power switching
[ 2.191251] hub 1-0:1.0: individual port over-current protection
[ 2.191267] hub 1-0:1.0: Single TT
[ 2.191280] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.191293] hub 1-0:1.0: power on to power good time: 20ms
[ 2.191737] hub 1-0:1.0: local power source is good
[ 2.191756] hub 1-0:1.0: enabling power on all ports
[ 2.194135] initializing FSL-SOC USB Controller
[ 2.291537] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 2.300931] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[ 2.311218] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 2
[ 2.321038] fsl-ehci fsl-ehci.0: reset hcs_params 0x10011 dbg=0 ind cc=0 pcc=0 ordered ports=1
[ 2.321061] fsl-ehci fsl-ehci.0: reset hcc_params 0006 thresh 0 uframes 256/512/1024 park
[ 2.321188] fsl-ehci fsl-ehci.0: park 0
[ 2.321211] fsl-ehci fsl-ehci.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 2.321228] fsl-ehci fsl-ehci.0: ...powerdown ports...
[ 2.350967] fsl-ehci fsl-ehci.0: supports USB remote wakeup
[ 2.351030] fsl-ehci fsl-ehci.0: irq 18, io base 0x53f80000
[ 2.358914] fsl-ehci fsl-ehci.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 2.370895] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[ 2.379073] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 2.379174] fsl-ehci fsl-ehci.1: GetStatus port:1 status 10001803 8 ACK POWER sig=j CSC CONNECT
[ 2.379266] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 2.379709] usb usb2: default language 0x0409
[ 2.379796] usb usb2: udev 1, busnum 2, minor = 128
[ 2.379810] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.388983] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.398518] usb usb2: Product: Freescale On-Chip EHCI Host Controller
[ 2.407282] usb usb2: Manufacturer: Linux 3.1.0-1002-linaro-lt-mx5 ehci_hcd
[ 2.416622] usb usb2: SerialNumber: fsl-ehci.0
[ 2.424759] usb usb2: usb_probe_device
[ 2.424782] usb usb2: configuration #1 chosen from 1 choice
[ 2.424884] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 2.425647] hub 2-0:1.0: usb_probe_interface
[ 2.425664] hub 2-0:1.0: usb_probe_interface - got id
[ 2.425686] hub 2-0:1.0: USB hub found
[ 2.431967] hub 2-0:1.0: 1 port detected
[ 2.438100] hub 2-0:1.0: standalone hub
[ 2.438111] hub 2-0:1.0: individual port power switching
[ 2.438123] hub 2-0:1.0: individual port over-current protection
[ 2.438138] hub 2-0:1.0: Single TT
[ 2.438151] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.438164] hub 2-0:1.0: power on to power good time: 20ms
[ 2.438238] hub 2-0:1.0: local power source is good
[ 2.438255] hub 2-0:1.0: enabling power on all ports
[ 2.440705] usbcore: registered new interface driver cdc_wdm
[ 2.448917] Initializing USB Mass Storage driver...
[ 2.456857] usbcore: registered new interface driver usb-storage
[ 2.465348] USB Mass Storage support registered.
[ 2.473586] usbcore: registered new interface driver libusual
[ 2.531016] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 2.650972] usb 1-1: new high speed USB device number 2 using fsl-ehci
[ 2.711242] fsl-ehci fsl-ehci.1: port 1 high speed
[ 2.711270] fsl-ehci fsl-ehci.1: GetStatus port:1 status 18001205 12 ACK POWER sig=se0 LPM PE CONNECT
[ 2.801890] usb 1-1: default language 0x0409
[ 2.810136] usb 1-1: udev 2, busnum 1, minor = 1
[ 2.810152] usb 1-1: New USB device found, idVendor=05ac, idProduct=1005
[ 2.819240] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.828720] usb 1-1: Product: Keyboard Hub
[ 2.835087] usb 1-1: Manufacturer: Apple Inc.
[ 2.841683] usb 1-1: SerialNumber: 000000000000
[ 2.850070] usb 1-1: usb_probe_device
[ 2.850096] usb 1-1: configuration #1 chosen from 1 choice
[ 2.850558] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 2.851468] hub 1-1:1.0: usb_probe_interface
[ 2.851488] hub 1-1:1.0: usb_probe_interface - got id
[ 2.851523] hub 1-1:1.0: USB hub found
[ 2.857882] hub 1-1:1.0: 3 ports detected
[ 2.864218] hub 1-1:1.0: compound device; port removable status: RFR
[ 2.864234] hub 1-1:1.0: individual port power switching
[ 2.864246] hub 1-1:1.0: individual port over-current protection
[ 2.864261] hub 1-1:1.0: Single TT
[ 2.864274] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.864287] hub 1-1:1.0: Port indicators are supported
[ 2.864299] hub 1-1:1.0: power on to power good time: 100ms
[ 2.864530] hub 1-1:1.0: hub controller current requirement: 200mA
[ 2.864546] hub 1-1:1.0: 100mA bus power budget for each child
[ 2.864898] hub 1-1:1.0: enabling power on all ports
[ 2.867223] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 2.867252] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 2.867302] fsl-ehci fsl-ehci.1: GetStatus port:1 status 1c00100a 14 ACK POWER sig=se0 PEC CSC
[ 2.867380] hub 1-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
[ 2.867400] usb 1-1: USB disconnect, device number 2
[ 2.875153] usbcore: registered new interface driver usbtest
[ 2.883378] usb 1-1: unregistering device
[ 2.883397] usb 1-1: unregistering interface 1-1:1.0
[ 2.888019] usb 1-1: usb_disable_device nuking all URBs
[ 2.897888] mxc_rtc mxc_rtc.0: hardware module can't be enabled!
[ 2.908374] mxc_rtc: probe of mxc_rtc.0 failed with error -5
[ 2.921197] mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0
[ 2.930763] i2c /dev entries driver
[ 2.940520] Linux video capture interface: v2.00
[ 2.949965] mxc_v4l2_output mxc_v4l2_output.0: Registered device video0
[ 2.960103] Driver for 1-wire Dallas network protocol.
[ 2.971204] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
[ 2.984334] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: <email address hidden>
[ 2.996397] cpuidle: using governor ladder
[ 3.003211] cpuidle: using governor menu
[ 3.010576] sdhci: Secure Digital Host Controller Interface driver
[ 3.019440] sdhci: Copyright(c) Pierre Ossman
[ 3.026298] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.034534] fsl-ehci fsl-ehci.1: GetStatus port:1 status 10001803 8 ACK POWER sig=j CSC CONNECT
[ 3.035398] mxc: set GPIO 77 to high trigger
[ 3.035593] mmc0: no vmmc regulator found
[ 3.043668] Registered led device: mmc0::
[ 3.045103] mmc0: SDHCI controller on sdhci-esdhc-imx53.0 [sdhci-esdhc-imx53.0] using DMA
[ 3.056772] mxc: set GPIO 75 to low trigger
[ 3.056963] mmc1: no vmmc regulator found
[ 3.064606] Registered led device: mmc1::
[ 3.065417] mmc1: SDHCI controller on sdhci-esdhc-imx53.2 [sdhci-esdhc-imx53.2] using DMA
[ 3.179300] VPU initialized
[ 3.186432] Registered led device: green
[ 3.199456] usbcore: registered new interface driver usbhid
[ 3.208165] usbhid: USB HID core driver
[ 3.221536] mxc_spdif mxc_spdif.0: MXC SPDIF Audio
[ 3.237871] sgtl5000 1-000a: Failed to get supply 'VDDD': -19
[ 3.248667] print_constraints: 1-000a: 850 <--> 1600 mV at 1200 mV normal
[ 3.259087] hub 1-0:1.0: debounce: port 1: total 175ms stable 100ms status 0x101
[ 3.264406] sgtl5000 1-000a: Using internal LDO instead of VDDD
[ 3.280576] sgtl5000 1-000a: sgtl5000 revision 17
[ 3.300536] mxc: set GPIO 37 to low trigger
[ 3.303748] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 3.315156] asoc: sgtl5000 <-> imx-ssi.1 mapping ok
[ 3.423643] usb 1-1: new high speed USB device number 3 using fsl-ehci
[ 3.437415] input: sgtl5000-audio Headphone Jack as /devices/platform/soc-audio/sound/card0/input0
[ 3.457931] asoc: mxc-spdif <-> imx-spdif-dai.0 mapping ok
[ 3.469344] ALSA device list:
[ 3.475439] #0: sgtl5000-audio
[ 3.481460] #1: imx-spdif
[ 3.488349] oprofile: using arm/armv7
[ 3.495801] TCP cubic registered
[ 3.502274] fsl-ehci fsl-ehci.1: port 1 high speed
[ 3.502303] fsl-ehci fsl-ehci.1: GetStatus port:1 status 18001205 12 ACK POWER sig=se0 LPM PE CONNECT
[ 3.502390] Initializing XFRM netlink socket
[ 3.509989] NET: Registered protocol family 10
[ 3.519732] IPv6 over IPv4 tunneling driver
[ 3.528671] NET: Registered protocol family 17
[ 3.536199] NET: Registered protocol family 15
[ 3.543548] mmc0: new SDHC card at address 1234
[ 3.551317] Registering the dns_resolver key type
[ 3.559274] VFP support v0.3:
[ 3.565542] mmcblk0: mmc0:1234 SA04G 3.68 GiB
[ 3.575779] implementor 41 architecture 3 part 30 variant c rev 2
[ 3.589602] ThumbEE CPU extension supported.
[ 3.597897] mmcblk0: p1 p2 p3
[ 3.604791] usb 1-1: default language 0x0409
[ 3.606014] Registering SWP/SWPB emulation handler
[ 3.619511] usb 1-1: udev 3, busnum 1, minor = 2
[ 3.619533] usb 1-1: New USB device found, idVendor=05ac, idProduct=1005
[ 3.737233] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.752124] regulator_init_complete: DA9052_BUCK_PERI: incomplete constraints, leaving on
[ 3.763331] usb 1-1: Product: Keyboard Hub
[ 3.770002] usb 1-1: Manufacturer: Apple Inc.
[ 3.776958] regulator_init_complete: DA9052_BUCK_MEM: incomplete constraints, leaving on
[ 3.787733] usb 1-1: SerialNumber: 000000000000
[ 3.794890] regulator_init_complete: DA9052_BUCK_PRO: incomplete constraints, leaving on
[ 3.806894] usb 1-1: usb_probe_device
[ 3.806920] usb 1-1: configuration #1 chosen from 1 choice
[ 3.807180] regulator_init_complete: DA9052_BUCK_CORE: incomplete constraints, leaving on
[ 3.818379] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 3.818936] regulator_init_complete: DA9052_LDO10: incomplete constraints, leaving on
[ 3.829976] hub 1-1:1.0: usb_probe_interface
[ 3.829996] hub 1-1:1.0: usb_probe_interface - got id
[ 3.830021] hub 1-1:1.0: USB hub found
[ 3.836607] regulator_init_complete: DA9052_LDO9: incomplete constraints, leaving on
[ 3.847118] hub 1-1:1.0: 3 ports detected
[ 3.853799] regulator_init_complete: DA9052_LDO8: incomplete constraints, leaving on
[ 3.864232] hub 1-1:1.0: compound device; port removable status: RFR
[ 3.864247] hub 1-1:1.0: individual port power switching
[ 3.864259] hub 1-1:1.0: individual port over-current protection
[ 3.864274] hub 1-1:1.0: Single TT
[ 3.864287] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 3.864300] hub 1-1:1.0: Port indicators are supported
[ 3.864312] hub 1-1:1.0: power on to power good time: 100ms
[ 3.864386] regulator_init_complete: DA9052_LDO7: incomplete constraints, leaving on
[ 3.874840] hub 1-1:1.0: hub controller current requirement: 200mA
[ 3.874856] hub 1-1:1.0: 100mA bus power budget for each child
[ 3.874927] regulator_init_complete: DA9052_LDO6: incomplete constraints, leaving on
[ 3.885328] hub 1-1:1.0: enabling power on all ports
[ 3.885408] regulator_init_complete: DA9052_LDO5: incomplete constraints, leaving on
[ 3.895774] regulator_init_complete: DA9052_LDO4: incomplete constraints, leaving on
[ 3.910621] regulator_init_complete: DA9052_LDO3: incomplete constraints, leaving on
[ 3.921805] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 3.921998] regulator_init_complete: DA9052_LDO2: incomplete constraints, leaving on
[ 3.932246] regulator_init_complete: DA9052_LDO1: incomplete constraints, leaving on
[ 4.042655] hub 1-1:1.0: port 2: status 0101 change 0001
[ 4.043689] mxc: set GPIO 8 to low trigger
[ 4.044063] mxc: set GPIO 46 to low trigger
[ 4.044338] mxc: set GPIO 47 to low trigger
[ 4.045495] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 4.058040] mxc_rtc mxc_rtc.0: setting system clock to 2011-11-21 11:06:48 UTC (1321873608)
[ 4.072784] Freeing init memory: 320K
[ 4.141214] usb 1-1: link qh256-0001/d9744600 start 1 [1/0 us]
[ 4.141396] hub 1-1:1.0: state 7 ports 3 chg 0004 evt 0000
[ 4.141812] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 4.271363] usb 1-1.2: new low speed USB device number 4 using fsl-ehci
[ 4.382193] udevd[712]: starting version 173
[ 4.405327] usb 1-1.2: skipped 1 descriptor after interface
[ 4.405358] usb 1-1.2: skipped 1 descriptor after interface
[ 4.405915] usb 1-1.2: default language 0x0409
[ 4.410215] usb 1-1.2: udev 4, busnum 1, minor = 3
[ 4.410238] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=021d
[ 4.453050] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.489849] usb 1-1.2: Product: Apple Keyboard
[ 4.701044] usb 1-1.2: Manufacturer: Apple Inc.
[ 4.759172] usb 1-1.2: usb_probe_device
[ 4.759200] usb 1-1.2: configuration #1 chosen from 1 choice
[ 4.802846] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
[ 4.803495] usbtest 1-1.2:1.0: usb_probe_interface
[ 4.803514] usbtest 1-1.2:1.0: usb_probe_interface - got id
[ 4.803680] usbhid 1-1.2:1.0: usb_probe_interface
[ 4.803696] usbhid 1-1.2:1.0: usb_probe_interface - got id
[ 4.855836] input: Apple Inc. Apple Keyboard as /devices/platform/fsl-ehci.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
[ 5.238894] usb 1-1.2: link qh8-0e01/d8acf400 start 2 [1/2 us]
[ 5.274150] apple 0003:05AC:021D.0001: input: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-fsl-ehci.1-1.2/input0
[ 5.428638] usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1)
[ 5.429502] usbtest 1-1.2:1.1: usb_probe_interface
[ 5.429523] usbtest 1-1.2:1.1: usb_probe_interface - got id
[ 5.429639] usbhid 1-1.2:1.1: usb_probe_interface
[ 5.429653] usbhid 1-1.2:1.1: usb_probe_interface - got id
[ 5.440529] input: Apple Inc. Apple Keyboard as /devices/platform/fsl-ehci.1/usb1/1-1/1-1.2/1-1.2:1.1/input/input3
[ 5.477922] usb 1-1.2: link qh8-0e01/d8acfc80 start 3 [1/2 us]
[ 5.480638] apple 0003:05AC:021D.0002: input: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-fsl-ehci.1-1.2/input1
[ 5.548852] hub 1-1:1.0: 280mA power budget left
[ 5.548884] hub 1-1:1.0: state 7 ports 3 chg 0000 evt 0004
[ 6.096051] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[ 7.146264] init: ureadahead main process (837) terminated with status 5
[ 8.073849] udevd[876]: starting version 173
[ 9.267894] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro
[ 10.816253] hub 1-1:1.0: state 7 ports 3 chg 0000 evt 0008
[ 10.816773] hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s
[ 10.972316] hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
[ 11.051412] usb 1-1.3: new low speed USB device number 5 using fsl-ehci
[ 11.164817] usb 1-1.3: skipped 1 descriptor after interface
[ 11.165722] usb 1-1.3: default language 0x0409
[ 11.168426] usb 1-1.3: udev 5, busnum 1, minor = 4
[ 11.168448] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c00e
[ 11.168462] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.168477] usb 1-1.3: Product: USB-PS/2 Optical Mouse
[ 11.168489] usb 1-1.3: Manufacturer: Logitech
[ 11.170335] usb 1-1.3: usb_probe_device
[ 11.170366] usb 1-1.3: configuration #1 chosen from 1 choice
[ 11.171252] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
[ 11.172104] usbtest 1-1.3:1.0: usb_probe_interface
[ 11.172125] usbtest 1-1.3:1.0: usb_probe_interface - got id
[ 11.172242] usbhid 1-1.3:1.0: usb_probe_interface
[ 11.172256] usbhid 1-1.3:1.0: usb_probe_interface - got id
[ 11.207554] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/fsl-ehci.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input4
[ 11.208600] generic-usb 0003:046D:C00E.0003: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-fsl-ehci.1-1.3/input0
[ 11.229990] hub 1-1:1.0: 182mA power budget left
[ 11.230021] hub 1-1:1.0: state 7 ports 3 chg 0000 evt 0008
[ 11.604664] input: mma8450 as /devices/virtual/input/input5
[ 11.861784] Registered led device: LED_GPIO14
[ 11.892239] Registered led device: LED_GPIO15
[ 11.965698] input: da9052-onkey as /devices/platform/imx-i2c.0/i2c-0/0-0048/da9052-onkey/input/input6
[ 12.092346] da9052-rtc da9052-rtc: rtc core: registered da9052-rtc as rtc1
[ 12.093347] DA9052 SM probe - 0
[ 18.640242] mousedev: PS/2 mouse device common for all mice
[ 19.530841] init: failsafe main process (1216) killed by TERM signal
[ 21.628644] init: apport pre-start process (1308) terminated with status 1
[ 21.814498] init: alsa-restore main process (1313) terminated with status 99
[ 21.927467] init: apport post-stop process (1334) terminated with status 1
[ 23.645980] eth0: Freescale FEC PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=1:00, irq=-1)
[ 23.648797] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.887901] Bluetooth: Core ver 2.16
[ 24.894075] NET: Registered protocol family 31
[ 24.894101] Bluetooth: HCI device and connection manager initialized
[ 24.894635] Bluetooth: HCI socket layer initialized
[ 25.448841] usb 1-1.3: link qh8-0e01/d82ad900 start 4 [1/2 us]
[ 25.642028] PHY: 1:00 - Link is Up - 100/Full
[ 25.643196] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 26.140212] init: plymouth-stop pre-start process (1509) terminated with status 1
[ 26.383510] init: tty1 main process (1510) killed by TERM signal
[ 26.981572] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9
[ 26.981597] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9
[ 36.480961] eth0: no IPv6 routers present
[ 65.285892] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro,commit=0
[ 69.631261] warning: process `colord' used the deprecated sysctl system call with 8.1.2.
[ 2048.305592] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9
[ 2048.305612] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9
[ 3469.400254] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9
[ 3469.400431] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9
for reference, an 11.10 quickstart bootlog with working sata
root@despina:~# dmesg 1000-linaro- lt-mx5 (buildd@crabapple) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #8-Ubuntu Tue Aug 16 15:08:35 UTC 2011 init_node: node 0, pgdat c05a62f0, node_mem_map c0610000 ttymxc0, 115200n8 root=UUID= 6af2dfba- 9f39-4e46- b941-f841836e28 1c rootwait ro
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-
[ 0.000000] CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c5387f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Freescale MX53 LOCO Board
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 221184
[ 0.000000] free_area_
[ 0.000000] DMA zone: 704 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 89408 pages, LIFO batch:15
[ 0.000000] HighMem zone: 2368 pages used for memmap
[ 0.000000] HighMem zone: 128704 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 218112
[ 0.000000] Kernel command line: console=tty0 console=
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 352MB 512MB = 864MB total
[ 0.000000] Memory: 868916k/868916k available, 15820k reserved, 524288K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xf7e00000 - 0xffe00000 ( 128 MB)
[ 0.000000] vmalloc : 0xd6800000 - 0xf4000000 ( 472 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd6000000 ( 352 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0039000 ( 196 kB)
[ 0.000000] .text : 0xc0039000 - 0xc055e000 (5268 kB)
[ 0.000000] .data : 0xc055e000 - 0xc05a7200 ( 293 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:368
[ 0.000000] TrustZone Interrupt Controller (TZIC) initialized
[ 0.000000] MXC GPIO hardware
[ 0.000000] sched_clock: 32 bits at 8MHz, resolution 125ns, wraps every 536870ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000409] Calibrating delay loop... 999.42 BogoMIPS (lpj=4997120)
[ 0.260163] pid_max: default: 32768 minimum: 301
[ 0.260331] Security Framework initialized
[ 0.260370] AppArmor: AppArmor disabled by boot time parameter
[ 0.260427] Mount-cache hash table entries: 512
[ 0.260836] CPU: Testing write buffer coherency: ok
[ 0.261051] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.261524] devtmpfs: initialized
[ 0.2672...