Panda-LEB Build hangs on bringup sometimes

U-Boot 2011.06 (Aug 02 2011 - 01:14:30)

CPU : OMAP4430
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0
Using default environment

Texas Instruments X-Loader 1.5.0 (Jul 5 2011 - 17:49:47)
Reading boot sector

Texas Instruments X-Loader 1.5.0 (Jul 5 2011 - 17:49:47)
Reading boot sector
Loading u-boot.bin from mmc

U-Boot 2011.06 (Aug 02 2011 - 01:14:30)

CPU : OMAP4430
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0
Using default environment

In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
reading boot.scr

457 bytes read
Running bootscript from mmc0 ...
## Executing script at 82000000
reading uImage

4254024 bytes read
reading uInitrd

168511 bytes read
## Booting kernel from Legacy Image at 80200000 ...
   Image Name: Linux-3.0.0+
   Image Type: ARM Linux Kernel Image (uncompressed)
   Data Size: 4253960 Bytes = 4.1 MiB
   Load Address: 80008000
   Entry Point: 80008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
   Image Name: Android Ramdisk Image
   Image Type: ARM Linux RAMDisk Image (gzip compressed)
   Data Size: 168447 Bytes = 164.5 KiB
   Load Address: 00000000
   Entry Point: 00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
<5>Linux version 3.0.0+ (jenkins-build@ip-10-38-67-90) (gcc version 4.6.2 20110630 (prerelease) (Lina
ro GCC 4.6-2011.07-0) ) #1 SMP PREEMPT Tue Aug 2 02:09:32 UTC 2011
CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: OMAP4430 Panda board
<6>Reserving 50331648 bytes SDRAM for VRAM
Memory policy: ECC disabled, Data cache writealloc
<6>OMAP4430 ES2.1
<6>SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xe000
<7>On node 0 totalpages: 235520
<7>free_area_init_node: node 0, pgdat c0861d20, node_mem_map c162a000
<7> Normal zone: 1536 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 180736 pages, LIFO batch:31
<7> HighMem zone: 512 pages used for memmap
<7> HighMem zone: 52736 pages, LIFO batch:15
<3>powerdomain: waited too long for powerdomain dss_pwrdm to complete transition
<6>PERCPU: Embedded 7 pages/cpu @c1e3a000 s6976 r8192 d13504 u32768
<7>pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096
<7>pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 233472
<5>Kernel command line: console=tty0 console=ttyO2,115200n8 rootwait ro earlyprintk fixrtc nocompcach
e vram=48M omapfb.vram=0:24M,1:24M mem=456M@0x80000000 mem=512M@0xA0000000 init=/init androidboot.con
sole=ttyO2 omapdss.def_disp=hdmi consoleblank=0 no_console_suspend

<6>PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 456MB 464MB = 920MB total
<5>Memory: 918668k/918668k available, 72564k reserved, 212992K highmem
<5>Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
    DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
    vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
      .init : 0xc0008000 - 0xc004a000 ( 264 kB)
      .text : 0xc004a000 - 0xc07e8050 (7801 kB)
      .data : 0xc07ea000 - 0xc0863b00 ( 487 kB)
       .bss : 0xc0863b24 - 0xc0e3da48 (5992 kB)
<6>Preemptible hierarchical RCU implementation.
<6>NR_IRQS:410
<4>omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
<6>OMAP clockevent source: GPTIMER1 at 32768 Hz
<6>sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
<6>Console: colour dummy device 80x30
<6>console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
 memory used by lock dependency info: 3695 kB
 per task-struct memory footprint: 1152 bytes
<6>Calibrating delay loop... <c>2007.19 BogoMIPS (lpj=7839744)
<6>pid_max: default: 32768 minimum: 301
<6>Security Framework initialized
<6>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<4>twd_timer_setup: no clock found
<6>Calibrating local timer... 492.01MHz.
<6>L310 cache controller enabled
<6>l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B
CPU1: Booted secondary processor
<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>Brought up 2 CPUs
<6>SMP: Total of 2 processors activated (3972.37 BogoMIPS).
<6>devtmpfs: initialized
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for dsp
<4>omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
<4>omap_hwmod: mcpdm: cannot be enabled (3)
<6>print_constraints: dummy:
<6>NET: Registered protocol family 16
<6>GPMC revision 6.0
<4>omap_device: omap_gpio.0: new worst case activate latency 0: 244140
<6>OMAP GPIO hardware version 0.1
<6>OMAP GPIO hardware version 0.1
<6>OMAP GPIO hardware version 0.1
<6>OMAP GPIO hardware version 0.1
<6>OMAP GPIO hardware version 0.1
<6>OMAP GPIO hardware version 0.1
<6>omap_mux_init: Add partition: #1: core, flags: 2
<6>omap_mux_init: Add partition: #2: wkup, flags: 2
<4>omap_device: omap_uart.1: new worst case activate latency 0: 122070

Kernel hangs....