Bug #737388 “SATA 3.0 port&IDE mode: Cannot Detect DVD Drive” : Bugs : linux package : Ubuntu

Revision history for this message

etnba (g9417717) wrote on 2011-03-18:

#3

uname-a.log Edit (92 bytes, text/plain)

Revision history for this message

etnba (g9417717) wrote on 2011-03-18:

#4

version.log Edit (38 bytes, text/plain)

Revision history for this message

etnba (g9417717) wrote on 2011-03-18:

#5

apt-cache.txt Edit (353 bytes, text/plain)

Revision history for this message

etnba (g9417717) wrote on 2011-03-18:

#6

lsb_release.txt Edit (41 bytes, text/plain)

Revision history for this message

etnba (g9417717) wrote on 2011-03-18:

#7

Can I remove the attachment #1 and #2? I upload the wrong files.

description:

updated

Revision history for this message

etnba (g9417717) wrote on 2011-03-18:

#8

dmesg.log Edit (50.4 KiB, text/plain)

the correct dmesg.log

Revision history for this message

etnba (g9417717) wrote on 2011-03-18:

#9

lspci-vnvn.log Edit (19.0 KiB, text/plain)

the correct lspci-vnvn.log

Revision history for this message

etnba (g9417717) wrote on 2011-03-18:

#10

the major messages form dmesg.log

[ 1.739662] ata_piix 0000:00:1f.2: version 2.13
[ 1.739692] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.739813] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.894822] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.894900] scsi0 : ata_piix
[ 1.895093] scsi1 : ata_piix
[ 1.896558] ata1: SATA max UDMA/133 cmd 0x3098 ctl 0x30ac bmdma 0x3070 irq 19
[ 1.896679] ata2: SATA max UDMA/133 cmd 0x3090 ctl 0x30a8 bmdma 0x3078 irq 19
[ 1.896836] ata_piix 0000:00:1f.5: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.896968] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.050371] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.050450] scsi2 : ata_piix
[ 2.050619] scsi3 : ata_piix
[ 2.051460] ata3: SATA max UDMA/133 cmd 0x3088 ctl 0x30a4 bmdma 0x3050 irq 21
[ 2.051579] ata4: SATA max UDMA/133 cmd 0x3080 ctl 0x30a0 bmdma 0x3058 irq 21
[ 2.411524] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.959887] ata2.00: failed to resume link (SControl 0)
[ 3.119805] ata4: failed to resume link (SControl 0)
[ 3.131304] ata4: SATA link down (SStatus 4 SControl 0)
[ 3.299715] ata1.01: failed to resume link (SControl 0)
[ 3.321094] ata2.00: SATA link down (SStatus 4 SControl 0)
[ 3.321227] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 3.459693] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.459834] ata1.01: SATA link down (SStatus 4 SControl 0)
[ 3.459971] ata1.01: link offline, clearing class 3 to NONE
[ 3.479771] ata1.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
[ 3.519751] ata1.00: configured for UDMA/100
[ 8.517024] ata1.00: qc timeout (cmd 0xa0)
[ 8.517125] ata1.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 9.936295] ata1.01: failed to resume link (SControl 0)
[ 10.096289] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 10.096410] ata1.01: SATA link down (SStatus 4 SControl 0)
[ 10.096524] ata1.01: link offline, clearing class 3 to NONE
[ 10.127758] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 10.127866] ata1.00: revalidation failed (errno=-5)
[ 10.127970] ata1.00: limiting SATA link speed to 1.5 Gbps
[ 16.512919] ata1.01: failed to resume link (SControl 0)
[ 16.672899] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 16.673020] ata1.01: SATA link down (SStatus 4 SControl 0)
[ 16.674733] ata1.01: link offline, clearing class 3 to NONE
[ 16.732949] ata1.00: configured for UDMA/100
[ 21.730244] ata1.00: qc timeout (cmd 0xa0)
[ 21.730353] ata1.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 21.730457] ata1.00: disabled
[ 21.730567] ata1.00: hard resetting link
[ 22.080061] ata1.01: hard resetting link
[ 23.149510] ata1.01: failed to resume link (SControl 0)
[ 23.309488] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 23.309608] ata1.01: SATA link down (SStatus 4 SControl 0)
[ 23.309722] ata1.01: link offline, clearing class 3 to NONE
[ 23.309725] ata1: EH complete
[ 23.310136] Write protecting the kernel read-only data: 10240k

the major messages form dmesg.log

[    1.739662] ata_piix 0000:00:1f.2: version 2.13
[    1.739692] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.739813] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.894822] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.894900] scsi0 : ata_piix
[    1.895093] scsi1 : ata_piix
[    1.896558] ata1: SATA max UDMA/133 cmd 0x3098 ctl 0x30ac bmdma 0x3070 irq 19
[    1.896679] ata2: SATA max UDMA/133 cmd 0x3090 ctl 0x30a8 bmdma 0x3078 irq 19
[    1.896836] ata_piix 0000:00:1f.5: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.896968] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    2.050371] ata_piix 0000:00:1f.5: setting latency timer to 64
[    2.050450] scsi2 : ata_piix
[    2.050619] scsi3 : ata_piix
[    2.051460] ata3: SATA max UDMA/133 cmd 0x3088 ctl 0x30a4 bmdma 0x3050 irq 21
[    2.051579] ata4: SATA max UDMA/133 cmd 0x3080 ctl 0x30a0 bmdma 0x3058 irq 21
[    2.411524] ata3: SATA link down (SStatus 0 SControl 300)
[    2.959887] ata2.00: failed to resume link (SControl 0)
[    3.119805] ata4: failed to resume link (SControl 0)
[    3.131304] ata4: SATA link down (SStatus 4 SControl 0)
[    3.299715] ata1.01: failed to resume link (SControl 0)
[    3.321094] ata2.00: SATA link down (SStatus 4 SControl 0)
[    3.321227] ata2.01: SATA link down (SStatus 0 SControl 300)
[    3.459693] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.459834] ata1.01: SATA link down (SStatus 4 SControl 0)
[    3.459971] ata1.01: link offline, clearing class 3 to NONE
[    3.479771] ata1.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
[    3.519751] ata1.00: configured for UDMA/100
[    8.517024] ata1.00: qc timeout (cmd 0xa0)
[    8.517125] ata1.00: TEST_UNIT_READY failed (err_mask=0x4)
[    9.936295] ata1.01: failed to resume link (SControl 0)
[   10.096289] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   10.096410] ata1.01: SATA link down (SStatus 4 SControl 0)
[   10.096524] ata1.01: link offline, clearing class 3 to NONE
[   10.127758] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[   10.127866] ata1.00: revalidation failed (errno=-5)
[   10.127970] ata1.00: limiting SATA link speed to 1.5 Gbps
[   16.512919] ata1.01: failed to resume link (SControl 0)
[   16.672899] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   16.673020] ata1.01: SATA link down (SStatus 4 SControl 0)
[   16.674733] ata1.01: link offline, clearing class 3 to NONE
[   16.732949] ata1.00: configured for UDMA/100
[   21.730244] ata1.00: qc timeout (cmd 0xa0)
[   21.730353] ata1.00: TEST_UNIT_READY failed (err_mask=0x4)
[   21.730457] ata1.00: disabled
[   21.730567] ata1.00: hard resetting link
[   22.080061] ata1.01: hard resetting link
[   23.149510] ata1.01: failed to resume link (SControl 0)
[   23.309488] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   23.309608] ata1.01: SATA link down (SStatus 4 SControl 0)
[   23.309722] ata1.01: link offline, clearing class 3 to NONE
[   23.309725] ata1: EH complete
[   23.310136] Write protecting the kernel read-only data: 10240k

Revision history for this message

Phillip Susi (psusi) wrote on 2011-03-18:

#11

Is that a log of Ubuntu with the controller in IDE mode? Can you get a log where IDE mode works in RHEL?

As for how to fix it, well, you already found it: use AHCI mode. This is the preferred, native mode.

Changed in linux (Ubuntu):
status:	New → Incomplete

Revision history for this message

etnba (g9417717) wrote on 2011-03-19:

#12

RHEL_lspci.log Edit (19.0 KiB, text/plain)

For my work, I must use the SATA 3.0 port in IDE mode so I should try to fix it.

Attachment #1 and #2 are not in IDE mode. Please use attachment #8 and #9.

I set many boot option to fix this but it is in vain.

The RHEL_lspc.logi is the lspci log under RHEL 6.0 (Kernel: 2.6.32)
The RHEL_dmesg.logi is the dmesg log under RHEL 6.0 (Kernel: 2.6.32)

Revision history for this message

etnba (g9417717) wrote on 2011-03-19:

#13

RHEL_dmesg.log Edit (2.3 KiB, text/plain)

Revision history for this message

Phillip Susi (psusi) wrote on 2011-03-19:

#14

Please attach the COMPLETE logs of rhel and ubuntu booting in ide mode. That one it looks like it is still driving it in SATA mode. Also why do you have to use it in IDE mode? That mode is for compatibility with old operating systems without AHCI drivers.

Revision history for this message

Phillip Susi (psusi) wrote on 2011-03-19:

#15

Also could you try adding this to your kernel command line:

libata.force=1:nohrst

Revision history for this message

etnba (g9417717) wrote on 2011-03-21:

#16

Ub_lspci.log Edit (19.0 KiB, text/plain)

I add this to the kernel commane line:

file=/cdrom/preseed/ubuntu-server.seed vga=788 initrd=/install/initrd.gz libata.force=1:nohrst

The DVD drive still can't be detected.

You can double confirm that I set SATA controller to IDE mode via ub_lspci.log.

00:1f.2 IDE interface [0101]: Intel Corporation Cougar Point 4 port SATA IDE Controller [8086:1c00] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO])

Thanks for your help.

Revision history for this message

etnba (g9417717) wrote on 2011-03-21:

#17

Ub_dmesg.log Edit (49.6 KiB, text/plain)

Revision history for this message

etnba (g9417717) wrote on 2011-03-21:

#18

RHEL60_dmesg.log Edit (51.0 KiB, text/plain)

Revision history for this message

etnba (g9417717) wrote on 2011-03-21:

#19

RHEL60_lspci.log Edit (19.0 KiB, text/plain)

Revision history for this message

etnba (g9417717) wrote on 2011-03-21:

#20

The logs of Ubuntu: Ub_lspci.log and Ub_dmesg.log
The logs of RHEL6.0: RHEL60_dmesg.log and RHEL60_lspci.log

I should make sure the integrity of our product so that we can tell our customer that we can install ubuntu in any mode.

Thanks

etnba (g9417717) on 2011-03-23

description:

updated

Revision history for this message

Launchpad Janitor (janitor) wrote on 2011-05-22:

#21

[Expired for linux (Ubuntu) because there has been no activity for 60 days.]

Changed in linux (Ubuntu):
status:	Incomplete → Expired

Revision history for this message

Ming Lei (tom-leiming) wrote on 2011-08-25:

#22

Please try the patch[1] to see if it can fix your problem:

[1], https://bugzilla.kernel.org/attachment.cgi?id=69612
[2], https://bugs.launchpad.net/bugs/794642

Revision history for this message

Launchpad Janitor (janitor) wrote on 2011-10-18:

#23

Download full text (10.3 KiB)

This bug was fixed in the package linux - 3.1.0-1.1

---------------
linux (3.1.0-1.1) precise; urgency=low

[ Andiry Xu ]

* SAUCE: (drop during 3.2 merge) xHCI: AMD isoc link TRB chain bit quirk
- LP: #872811

[ Andy Whitcroft ]

  * Revert "ubuntu: compcache -- follow changes to bd_claim/bd_release"
    - LP: #832694
  * Revert "ubuntu: compcache -- version 0.5.3"
    - LP: #832694
  * [Config] standardise CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
  * [Config] Enable CONFIG_MACVTAP=m
    - LP: #822601
  * record the compiler in the ABI and check for inconsistant builds
  * [Config] move ECRYPT_FS back to =y for all architectures
    - LP: #827197
  * [Config] enable CONFIG_DRM_VMWGFX=m
    - LP: #698009
  * [Config] re-fix ECRYPT_FS=y
    - LP: #827197
  * enforcer -- ensure we have CONFIG_ECRYPT_FS=y
    - LP: #827197
  * [Config] dropping compcache configuration options
  * [Config] standardise on HZ=250
  * SAUCE: headers_install: fix #include "..." usage for userspace
    - LP: #824377
  * make module-inclusion selection retain the left overs
  * add a new linux-image-extras package for virtual

[ Colin Watson ]

* Deliver more Atheros, Ralink, and iwlagn NIC drivers to d-i

[ edwin_rong ]

* SAUCE: Staging: add driver for Realtek RTS5139 cardreader
- LP: #824273

[ Greg Kroah-Hartman ]

* SAUCE: staging: rts5139: add vmalloc.h to some files to fix the build.
- LP: #824273

[ Jesse Sung ]

* SAUCE: Unregister input device only if it is registered
- LP: #839238

[ Jiri Kosina ]

* SAUCE: HID: add MacBookAir4, 2 to hid_have_special_driver[]

[ Joshua V. Dillon ]

* SAUCE: HID: add support for MacBookAir4,2 keyboard.

[ Kees Cook ]

* [Config] enable and enforce SECCOMP_FILTER on x86

[ Keng-Yu Lin ]

* [Config] Enable CONFIG_RTS5139=m on i386/amd64
- LP: #824273

[ Leann Ogasawara ]

  * Revert "ubuntu: overlayfs -- ovl: make lower mount read-only"
  * Revert "ubuntu: overlayfs -- fs: limit filesystem stacking depth"
  * Revert "ubuntu: overlayfs -- ovl: improve stack use of lookup and
    readdir"
  * Revert "ubuntu: overlayfs -- ovl: fix overlayfs over overlayfs"
  * Revert "ubuntu: overlayfs -- overlayfs: implement show_options"
  * Revert "ubuntu: overlayfs -- overlayfs: add statfs support"
  * Revert "ubuntu: overlayfs -- overlay filesystem"
  * Revert "ubuntu: overlayfs -- overlay: overlay filesystem documentation"
  * Revert "SAUCE: ARM: OMAP: Add macros for comparing silicon revision"
  * Revert "SAUCE: OMAP: DSS2: check for both cpu type and revision, rather
    than just revision"
  * Revert "SAUCE: OMAP: DSS2: enable hsclk in dsi_pll_init for OMAP36XX"
  * Revert "ubuntu: fsam7400 disable driver"
    - LP: #876030
  * rebase to v3.1-rc1
  * [Config] updateconfigs after rebase to v3.1-rc1
  * rebase to v3.1-rc2
  * [Config] Updateconfigs after rebase to v3.1-rc2
  * ubuntu: Yama - update calls to generic_permission() and
    inode->i_op->permission()
  * ubuntu: ndiswrapper -- remove netdev_priv macro
  * ubuntu: aufs -- Temporarily disable due to build failure
  * [Config] Diable INTEL_MID_PTI on armel
  * [Config] Temporarily disable CONFIG_FTMAC100 on armel
  * [Conf...

This bug was fixed in the package linux - 3.1.0-1.1

---------------
linux (3.1.0-1.1) precise; urgency=low

[ Andiry Xu ]

* SAUCE: (drop during 3.2 merge) xHCI: AMD isoc link TRB chain bit quirk
    - LP: #872811

[ Andy Whitcroft ]

* Revert "ubuntu: compcache -- follow changes to bd_claim/bd_release"
    - LP: #832694
  * Revert "ubuntu: compcache -- version 0.5.3"
    - LP: #832694
  * [Config] standardise CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
  * [Config] Enable CONFIG_MACVTAP=m
    - LP: #822601
  * record the compiler in the ABI and check for inconsistant builds
  * [Config] move ECRYPT_FS back to =y for all architectures
    - LP: #827197
  * [Config] enable CONFIG_DRM_VMWGFX=m
    - LP: #698009
  * [Config] re-fix ECRYPT_FS=y
    - LP: #827197
  * enforcer -- ensure we have CONFIG_ECRYPT_FS=y
    - LP: #827197
  * [Config] dropping compcache configuration options
  * [Config] standardise on HZ=250
  * SAUCE: headers_install: fix #include "..." usage for userspace
    - LP: #824377
  * make module-inclusion selection retain the left overs
  * add a new linux-image-extras package for virtual

[ Colin Watson ]

* Deliver more Atheros, Ralink, and iwlagn NIC drivers to d-i

[ edwin_rong ]

* SAUCE: Staging: add driver for Realtek RTS5139 cardreader
    - LP: #824273

[ Greg Kroah-Hartman ]

* SAUCE: staging: rts5139: add vmalloc.h to some files to fix the build.
    - LP: #824273

[ Jesse Sung ]

* SAUCE: Unregister input device only if it is registered
    - LP: #839238

[ Jiri Kosina ]

* SAUCE: HID: add MacBookAir4, 2 to hid_have_special_driver[]

[ Joshua V. Dillon ]

* SAUCE: HID: add support for MacBookAir4,2 keyboard.

[ Kees Cook ]

* [Config] enable and enforce SECCOMP_FILTER on x86

[ Keng-Yu Lin ]

* [Config] Enable CONFIG_RTS5139=m on i386/amd64
    - LP: #824273

[ Leann Ogasawara ]

* Revert "ubuntu: overlayfs -- ovl: make lower mount read-only"
  * Revert "ubuntu: overlayfs -- fs: limit filesystem stacking depth"
  * Revert "ubuntu: overlayfs -- ovl: improve stack use of lookup and
    readdir"
  * Revert "ubuntu: overlayfs -- ovl: fix overlayfs over overlayfs"
  * Revert "ubuntu: overlayfs -- overlayfs: implement show_options"
  * Revert "ubuntu: overlayfs -- overlayfs: add statfs support"
  * Revert "ubuntu: overlayfs -- overlay filesystem"
  * Revert "ubuntu: overlayfs -- overlay: overlay filesystem documentation"
  * Revert "SAUCE: ARM: OMAP: Add macros for comparing silicon revision"
  * Revert "SAUCE: OMAP: DSS2: check for both cpu type and revision, rather
    than just revision"
  * Revert "SAUCE: OMAP: DSS2: enable hsclk in dsi_pll_init for OMAP36XX"
  * Revert "ubuntu: fsam7400 disable driver"
    - LP: #876030
  * rebase to v3.1-rc1
  * [Config] updateconfigs after rebase to v3.1-rc1
  * rebase to v3.1-rc2
  * [Config] Updateconfigs after rebase to v3.1-rc2
  * ubuntu: Yama - update calls to generic_permission() and
    inode->i_op->permission()
  * ubuntu: ndiswrapper -- remove netdev_priv macro
  * ubuntu: aufs -- Temporarily disable due to build failure
  * [Config] Diable INTEL_MID_PTI on armel
  * [Config] Temporarily disable CONFIG_FTMAC100 on armel
  * [Config] Temporarily disable CONFIG_FTGMAC100 on armel
  * [Config] Temporarily disable CONFIG_CAN_TI_HECC on armel
  * [Config] Temporarily disable CONFIG_VIDEO_OMAP2_VOUT on armel
  * [Config] Set CONFIG_DM_MIRROR=m on amd64, i386, and arm
  * [Config] Set CONFIG_DM_MULTIPATH=m on amd64, i386, and arm
  * [Config] Set CONFIG_DM_SNAPSHOT=m on amd64, i386, and arm
  * [Config] Enable CONFIG_EDAC_AMD8111=m on powerpc
  * [Config] Enable CONFIG_EDAC_AMD8131=m on powerpc
  * [Config] Enable CONFIG_EDAC_CPC925=m on powerpc
  * [Config] Enable CONFIG_EDAC_PASEMI=m on powerpc
  * [Config] Enable CONFIG_ECHO=m on powerpc
  * [Config] Enable CONFIG_ET131X=m on powerpc
  * [Config] Set CONFIG_FB_MATROX=m
  * [Config] Enable CONFIG_FB_UDL=m on powerpc
  * [Config] Set CONFIG_FB_VIRTUAL=n
  * [Config] Enable CONFIG_FB_VGA16=m on powerpc
  * [Config] Enable CONFIG_GPIO_MAX732X=m on arm
  * [Config] Enable CONFIG_GPIO_PCF857X=m on arm
  * [Config] Set CONFIG_HOTPLUG_PCI_FAKE=m
  * [Config] Enable CONFIG_HOTPLUG_PCI=y on powerpc
  * [Config] Enable CONFIG_HOTPLUG_PCI_CPCI=y on powerpc
  * [Config] Enable CONFIG_HP_ILO=m on powerpc-smp
  * [Config] Enable CONFIG_I2C_PASEMI=m on powerpc
  * [Config] Enable CONFIG_IBM_BSR=m on powerpc
  * [Config] Enable CONFIG_IBMVETH=m on powerpc
  * [Config] Enable CONFIG_IDE_PHISON=m on powerpc
  * [Config] Enable CONFIG_IGB=m on powerpc
  * [Config] Enable CONFIG_IIO=m on powerpc
  * [Config] Enable CONFIG_INFINIBAND_NES=m
  * [Config] Enable CONFIG_IPMI_HANDLER=m on arm
  * [Config] Enable CONFIG_IWL3945=m on powerpc
  * [Config] Disable CONFIG_KVM_BOOK3S_64
  * [Config] Enable CONFIG_LAPBETHER=m on arm
  * [Config] Enable CONFIG_LEDS_GPIO=m on powerpc
  * [Config] Enable CONFIG_LEDS_CLEVO_MAIL=m all arch's
  * [Config] Enable CONFIG_LEDS_PCA9532=m on powerpc
  * [Config] Enable CONFIG_LEDS_PCA955X=m on powerpc
  * [Config] Enable CONFIG_LEDS_TRIGGER_DEFAULT_ON=m on powerpc
  * [Config] Set CONFIG_LEDS_TRIGGER_HEARTBEAT=m on arm and powerpc
  * [Config] Set CONFIG_LEDS_TRIGGER_TIMER=m on powerpc
  * [Config] Enable CONFIG_LINE6_USB=m on arm and powerpc
  * [Config] Enable CONFIG_MEMSTICK=m on arm
  * [Config] Enable CONFIG_MTD_AFS_PARTS=m on arm
  * [Config] Enable CONFIG_MTD_ALAUDA=m on arm
  * [Config] Enable CONFIG_MTD_AR7_PARTS=m on arm
  * [Config] Enable CONFIG_MTD_ARM_INTEGRATOR=m on arm
  * [Config] Enable CONFIG_MOXA_SMARTIO=m on powerpc
  * [Config] Enable CONFIG_MTD_DATAFLASH=m on arm
  * [Config] Enable CONFIG_MTD_GPIO_ADDR=m on arm
  * [Config] Enable CONFIG_MTD_IMPA7=m on arm
  * [Config] Enable CONFIG_MTD_NAND_GPIO=m on arm
  * [Config] Enable CONFIG_MTD_NAND_NANDSIM=m on arm
  * [Config] Enable CONFIG_MTD_NAND_PASEMI=m on powerpc
  * [Config] Enable CONFIG_MTD_NAND_PLATFORM=m on arm
  * [Config] Enable CONFIG_MTD_NAND_TMIO=m on arm
  * [Config] Enable CONFIG_MTD_SST25L=m on arm
  * [Config] Enable CONFIG_NET_CLS_CGROUP=y on arm
  * [Config] Enable CONFIG_NET_CLS_FLOW=m on arm
  * [Config] Enable CONFIG_NET_CLS_U32=m on arm
  * [Config] Enable CONFIG_NET_DCCPPROBE=m on arm
  * [Config] Enable CONFIG_NET_SCH_INGRESS=m on arm
  * [Config] Enable CONFIG_NET_TCPPROBE=m on arm
  * [Config] Enable CONFIG_PASEMI_MAC=m on powerpc
  * [Config] Enable CONFIG_PATA_NS87410=m on powerpc
  * [Config] Enable CONFIG_I2C_GPIO=m on powerpc64-smp
  * [Config] Enable CONFIG_PANEL=m on powerpc
  * [Config] Enable CONFIG_PATA_CMD640_PCI=m on powerpc
  * SAUCE: x86: reboot: Make Dell Latitude E6520 use reboot=pci
    - LP: #833705
  * [Config] Add CONFIG_EFI_VARS=y to the enforcer
    - LP: #837332
  * [Config] Update CONFIG_EFI_VARS enforcer check
  * [Config] Add aufs to virtual flavor inclusion list
    - LP: #844159
  * SAUCE: x86: reboot: Make Dell Optiplex 790 use reboot=pci
    - LP: #818933
  * SAUCE: x86: reboot: Make Dell Optiplex 990 use reboot=pci
    - LP: #768039
  * SAUCE: x86: reboot: Make Dell Latitude E6220 use reboot=pci
    - LP: #838402
  * [Config] Add igbvf to the virtual flavor inclusion list
    - LP: #794570
  * [Config] Add ixgbevf to the virtual inclusion list
    - LP: #872411
  * [Config] Transition -generic and -server to be identical
  * rebase to v3.1-rc10

[ Luke Yelavich ]

* [Config] Disable legacy IDE drivers on powerpc

[ Ming Lei ]

* SAUCE: fireware: add NO_MSI quirks for o2micro controller
    - LP: #801719
  * SAUCE: ata_piix: make DVD Drive recognisable on systems with Intel
    Sandybridge chipsets(v2)
    - LP: #737388, #782389, #794642

[ Paolo Pisati ]

* [Config] Compile-in vfat support for armel
    - LP: #853783

[ Randy Dunlap ]

* SAUCE: staging: fix rts5139 depends & build
    - LP: #824273

[ Rene Bolldorf ]

* SAUCE: (drop after 3.0) ideapad: Check if acpi already handle backlight
    power in 'ideapad_backlight_notify_power' to avoid a page fault

[ Seth Forshee ]

* SAUCE: (no-up) Input: elantech - Add v3 hardware support
    - LP: #681904
  * SAUCE: (drop after 3.1) usb_storage: Don't freeze in usb-stor-scan
    - LP: #810020

[ Stefan Bader ]

* (config) Package macvlan and macvtap for virtual
  * [Config] Force perf to use libiberty for demangling
    - LP: #783660
  * SAUCE: xen: Do not use pv spinlocks on HVM
    - LP: #838026

[ Tim Gardner ]

* [Config] Clean up tools rules
  * [Config] Package x86_energy_perf_policy and turbostat
    - LP: #797556
  * rebase to v3.1-rc3
  * [Config] Simplify binary-udebs dependencies
  * [Config] kernel preparation cannot be parallelized
  * [Config] Linearize module/abi checks
  * [Config] Linearize and simplify tree preparation rules
  * [Config] Build kernel image in parallel with modules
  * [Config] Set concurrency for kmake invocations
  * [Config] Improve install-arch-headers speed
  * [Config] Fix binary-perarch dependencies
  * [Config] Removed stamp-flavours target
  * [Config] Serialize binary indep targets
  * [Config] Use build stamp directly
  * [Config] Restore prepare-% target
  * rebase to v3.1-rc4
  * rebase to v3.1-rc5
  * [Config] Disable makedumpfile for i386/amd64
  * rebase to v3.1-rc6
  * [Config] Fix binary-% build target
  * rebase to v3.1-rc7
  * rebase to v3.1-rc8
  * SAUCE: Add a new entry (413c:8197) to Bluetooth USB device ID table
    - LP: #854399
  * [Config] Enable ftrace support in the mac80211 layer
    - LP: #865171
  * rebase to v3.1-rc9
  * SAUCE: usb/core/devio.c: Check for printer class specific request
    - LP: #872711

[ Upstream Kernel Changes ]

* overlay filesystem
  * overlayfs: add statfs support
  * overlayfs: implement show_options
  * overlay: overlay filesystem documentation
  * fs: limit filesystem stacking depth

[ Will Drewry ]

* SAUCE: seccomp_filter: new mode with configurable syscall filters
  * SAUCE: seccomp_filter: add process state reporting
  * SAUCE: seccomp_filter: Document what seccomp_filter is and how it
    works.
  * SAUCE: seccomp_filter: add HAVE_SECCOMP_FILTER and seccomp_execve

[ Upstream Kernel Changes ]

* rebase to v3.1-rc1
  * rebase to v3.1-rc2
  * rebase to v3.1-rc3
    +CONFIG_BLK_DEV_BSGLIB=y
    +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
    -CONFIG_VIDEO_OMAP2_VOUT_VRFB=y
  * rebase to v3.1-rc4
  * rebase to v3.1-rc5
  * rebase to v3.1-rc6
  * rebase to v3.1-rc7
  * rebase to v3.1-rc8
  * rebase to v3.1-rc9
  * rebase to v3.1-rc10
 -- Leann Ogasawara <leann.ogasawara@canonical.com>   Wed, 10 Aug 2011 15:43:38 -0700

Changed in linux (Ubuntu):
status:	Expired → Fix Released

Revision history for this message

Herton R. Krzesinski (herton) wrote on 2011-10-20:

#24

This bug is awaiting verification that the kernel 3.0.0-13.21 for oneiric in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-oneiric' to 'verification-done-oneiric'.

If verification is not done by one week from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

tags:

added: verification-needed-oneiric

Revision history for this message

Herton R. Krzesinski (herton) wrote on 2011-11-01:

#25

This bug was not verified, but the patch which fixes this issue is verified on two other reports (bugs 782386, 794642). Thus the patch will not be reverted, and I'll mark this bug as verified. In case this bug isn't fixed by kernel 3.0.0-13.21, please report here.

tags:

added: verification-done-oneiric
removed: verification-needed-oneiric

Revision history for this message

Herton R. Krzesinski (herton) wrote on 2011-11-30:

#26

This bug is awaiting verification that the kernel for Natty in -proposed solves the problem (2.6.38-13.53). Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-natty' to 'verification-done-natty'.

If verification is not done by one week from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

tags:

added: verification-needed-natty

Revision history for this message

Herton R. Krzesinski (herton) wrote on 2011-12-07:

#27

This bug was not verified on Natty, but the patch which also fixes this issue is verified on two other reports on Natty already (bugs 782389, 794642). Thus the patch will not be reverted, and I'll mark this bug as verified. In case this bug isn't fixed by kernel 2.6.38-13.53, please report here.

tags:

added: verification-done-natty
removed: verification-needed-natty

Ubuntu
linux package

SATA 3.0 port&IDE mode: Cannot Detect DVD Drive

Bug Description

Related branches

Other bug subscribers

Bug attachments

Remote bug watches

Ubuntulinux package

SATA 3.0 port&IDE mode: Cannot Detect DVD Drive

Bug Description

Related branches

Other bug subscribers

Bug attachments

Remote bug watches

Ubuntu
linux package