no sound at all. Even unmuted

Please attach the output from ``lspci -nv && amixer''.

$ lspci -nv && amixer
0000:00:00.0 0600: 1039:0755 (rev 01)
        Subsystem: 1019:1891
        Flags: bus master, medium devsel, latency 32
        Memory at e4000000 (32-bit, non-prefetchable) [size=64M]
        Capabilities: <available only to root>

0000:00:01.0 0604: 1039:0002
        Flags: bus master, 66MHz, medium devsel, latency 99
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        Memory behind bridge: ec000000-edffffff
        Prefetchable memory behind bridge: e8000000-ebffffff

0000:00:02.0 0601: 1039:0964 (rev 36)
        Flags: bus master, medium devsel, latency 0

0000:00:02.5 0101: 1039:5513 (rev 01) (prog-if 80 [Master])
        Subsystem: 1019:1891
        Flags: bus master, medium devsel, latency 128
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at 4000 [size=16]

0000:00:02.7 0401: 1039:7012 (rev a0)
        Subsystem: 1019:1891
        Flags: bus master, medium devsel, latency 32, IRQ 217
        I/O ports at e000 [size=256]
        I/O ports at e100 [size=128]
        Capabilities: <available only to root>

0000:00:03.0 0c03: 1039:7001 (rev 0f) (prog-if 10)
        Subsystem: 1019:1891
        Flags: bus master, medium devsel, latency 32, IRQ 177
        Memory at ee024000 (32-bit, non-prefetchable) [size=4K]

0000:00:03.1 0c03: 1039:7001 (rev 0f) (prog-if 10)
        Subsystem: 1019:1891
        Flags: bus master, medium devsel, latency 32, IRQ 185
        Memory at ee020000 (32-bit, non-prefetchable) [size=4K]

0000:00:03.2 0c03: 1039:7001 (rev 0f) (prog-if 10)
        Subsystem: 1019:1891
        Flags: bus master, medium devsel, latency 32, IRQ 193
        Memory at ee021000 (32-bit, non-prefetchable) [size=4K]

0000:00:03.3 0c03: 1039:7002 (prog-if 20)
        Subsystem: 1019:1891
        Flags: bus master, medium devsel, latency 32, IRQ 201
        Memory at ee022000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <available only to root>

0000:00:04.0 0200: 1039:0900 (rev 91)
        Subsystem: 1019:1891
        Flags: bus master, medium devsel, latency 32, IRQ 225
        I/O ports at e200 [size=256]
        Memory at ee023000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at 30000000 [disabled] [size=128K]
        Capabilities: <available only to root>

0000:00:05.0 0101: 1039:0180 (rev 01) (prog-if 85 [Master SecO PriO])
        Subsystem: 1019:1891
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 169
        I/O ports at e300 [size=8]
        I/O ports at e400 [size=4]
        I/O ports at e500 [size=8]
        I/O ports at e600 [size=4]
        I/O ports at e700 [size=16]
        I/O ports at e800 [size=128]
        Capabilities: <available only to root>

0000:00:18.0 0600: 1022:1100
        Flags: fast devsel
        Capabilities: <available only to root>

0000:00:18.1 0600: 1022:1101
        Flags: fast devsel

0000:00:18.2 0600: 1022:1102
        Flags: fast devsel

0000:00:18.3 0600: 1022:1103
        Flags: fast devsel

0000:01:00.0 0300: 10de:0181 (rev c1)
        Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 209
     ...

Hi:

I had that problem after an upgrade, for Ubuntu 6.06.1. I opened
Synaptic, and made a search for Alsa. Then I installed all the items
that came up for the search. after rebooting, the sound worked again!

Alfred!

On Tue, 2006-05-09 at 10:54 +0000, linuxted wrote:
> ** Also affects: alsa-driver (upstream)
> Importance: Untriaged
> Status: Unconfirmed
>
> --
> no sound at all. Even unmuted
> https://launchpad.net/bugs/58339
>

Alfred,
    Thanks for the information. I tried reinstalling everything that was *previously* installed using your method with no luck. Did you mean you installed *everything* that came up after a search for Alsa (there were about 40 items)?!

Thanks

Alfred <email address hidden> wrote: Hi:

I had that problem after an upgrade, for Ubuntu 6.06.1. I opened
Synaptic, and made a search for Alsa. Then I installed all the items
that came up for the search. after rebooting, the sound worked again!

Alfred!

On Tue, 2006-05-09 at 10:54 +0000, linuxted wrote:
> ** Also affects: alsa-driver (upstream)
> Importance: Untriaged
> Status: Unconfirmed
>
> --
> no sound at all. Even unmuted
> https://launchpad.net/bugs/58339
>

--
no sound at all. Even unmuted
https://launchpad.net/bugs/58339

---------------------------------
Get your own web address for just $1.99/1st yr. We'll help. Yahoo! Small Business.

Hello:

I am running Efty Edge with the latest updates. I have the same symptom using intel chipset. Details below:

anmar@pico:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

anmar@pico:~$ lspci -nv && amixer
Simple mixer control 'Master',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 127
  Mono:
  Front Left: Playback 77 [61%] [on]
  Front Right: Playback 77 [61%] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 127
  Mono:
  Front Left: Playback 0 [0%] [off]
  Front Right: Playback 0 [0%] [off]
Simple mixer control 'Mic',0
  Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Mono
  Limits: Playback 0 - 127
  Mono: Capture [on]
  Front Left: Playback 0 [0%] [off]
  Front Right: Playback 0 [0%] [off]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 127
  Front Left: Capture 127 [100%] [off]
  Front Right: Capture 127 [100%] [off]
Simple mixer control 'Mix',0
  Capabilities: cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Mono
  Mono: Capture [off]
Simple mixer control 'External Amplifier',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Internal Mic',0
  Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Mono
  Limits: Playback 0 - 127
  Mono: Capture [off]
  Front Left: Playback 127 [100%] [off]
  Front Right: Playback 127 [100%] [off]

@linuxted: 'External Amplifier' needs to be unmuted.

@anmar: Your issue is completely different (due to a different DSP and codec). Please unmute and increase the level of 'PCM'. In the future please file a separate bug report.

@linuxted: Sorry, make that _muted_.

    Is this what I should get with amixer?:

Simple mixer control 'External Amplifier',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]

I still get no sound. What should I have used to make
it muted?

Thanks

--- Daniel T Chen <email address hidden> wrote:

> @linuxted: Sorry, make that _muted_.
>
> --
> no sound at all. Even unmuted
> https://launchpad.net/bugs/58339
>

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Correct, it's now muted. Now you need to try different settings of the 'IEC958 Playback AC97-SPSA' element,

e.g., amixer set 'IEC958 Playback AC97-SPSA' 1

or

amixer set 'IEC958 Playback AC97-SPSA' 2

or

amixer set 'IEC958 Playback AC97-SPSA' 3

Daniel,
    I tried all three both as myself and as root (without rebooting) and still have no sound. The speakers are definitely plugged in and powered up. Any hints? I'm stuck.

Thanks,
Ted

Daniel T Chen <email address hidden> wrote: Correct, it's now muted. Now you need to try different settings of the
'IEC958 Playback AC97-SPSA' element,

e.g., amixer set 'IEC958 Playback AC97-SPSA' 1

or

amixer set 'IEC958 Playback AC97-SPSA' 2

or

amixer set 'IEC958 Playback AC97-SPSA' 3

--
no sound at all. Even unmuted
https://launchpad.net/bugs/58339

---------------------------------
Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates.

Please boot off a desktop cd and check if sound is inaudible by default. If it isn't -- i.e., it's audible -- I need your /proc/asound/card0/codec97\#0/ac97\#0-0+regs as an attachment. Please also attach your current (inaudible) ac97\#0-0+regs . Be sure to label them unambiguously, thanks.

I had a similar problem, that has been solved: Ext Amplifier can remain unmuted, but line jack sense AND headphone jack sense need to be both turned off.

However, what is odd is that in Edgy sound worked fine (that is under the 2.6.17 kernel), however it did not work fine under Feisty (both the 2.6.19 and the 2.6.20 kernel). So I'm guessing there is nonetheless some bug in the module.

Kind regards

Batist Paklons please submit a new bug about your issue as it involves a different kernel.

i got the same problem and i have try to installed everything search under Synaptic with ALSA but still no luck.

I am not sure sure my case is the same with this one, but I don't know how to open a new thread, sorry.

follow is some basic info:

$ uname -r
2.6.20-16-generic

$ aplay -l
aplay: device_list:222: no soundcards found...

$ lspci -v
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 80)
        Subsystem: Foxconn International, Inc. Unknown device 0c81
        Flags: 66MHz, slow devsel, IRQ 20
        Memory at fdff8000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

Anyone can help.

Thanks.

[Expired for linux-source-2.6.15 (Ubuntu) because there has been no activity for 60 days.]