PCI: Cannot allocate resource region

Bug #153179 reported by fmeazza
2
Affects Status Importance Assigned to Milestone
Ubuntu
New
Undecided
Unassigned
Nominated for Gutsy by fmeazza

Bug Description

Good morning, i've some error during boot:

[ 15.742871] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 15.742922] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 15.742970] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
[ 15.743017] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0

My pc seems to o well even if there are these segnalation. My machine is an Acer Aspire 3022WLMI with ati Mobility Radeon X600.

I post you the output of the command dmesg | grep PCI

[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 15.684867] PCI: PCI BIOS revision 2.10 entry at 0xfd63c, last bus=6
[ 15.684870] PCI: Using configuration type 1
[ 15.684872] Setting up standard PCI resources
[ 15.727148] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.727154] PCI: Probing PCI hardware (bus 00)
[ 15.728761] PCI: Transparent bridge - 0000:00:14.4
[ 15.728870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.729067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 15.729206] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 15.729344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 15.729491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 15.732668] ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11)
[ 15.732787] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[ 15.732902] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[ 15.733016] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
[ 15.733130] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
[ 15.733243] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
[ 15.733357] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11)
[ 15.733471] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
[ 15.742860] PCI: Using ACPI for IRQ routing
[ 15.742863] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 15.742871] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 15.742922] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 15.742970] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
[ 15.743017] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
[ 15.794506] PCI: Bridge: 0000:00:02.0
[ 15.794519] PCI: Bridge: 0000:00:06.0
[ 15.794528] PCI: Bridge: 0000:00:07.0
[ 15.794546] PCI: Bus 7, cardbus bridge: 0000:06:06.0
[ 15.794572] PCI: Bridge: 0000:00:14.4
[ 15.794604] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 15.794611] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 15.794618] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 15.794763] ACPI: PCI Interrupt Link [LNKE] disabled and referenced, BIOS bug
[ 15.794816] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 15.794819] PCI: setting IRQ 11 as level-triggered
[ 15.794824] ACPI: PCI Interrupt 0000:06:06.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 16.559652] PCI: MSI quirk detected. MSI deactivated.
[ 16.990150] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 16.990235] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 16.990307] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 17.368719] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 17.368724] ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 17.368734] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 4.312000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 4.312000] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 4.484000] ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 4.648000] ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 4.896000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 4.896000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 4.896000] PCI: setting IRQ 10 as level-triggered
[ 4.896000] ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 7.288000] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
[ 7.288000] ACPI: PCI Interrupt 0000:06:06.2[C] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
[ 7.340000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[c0208000-c02087ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 7.348000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 7.348000] ACPI: PCI Interrupt 0000:06:07.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 19.620000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 19.692000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 20.536000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
[ 20.536000] ACPI: PCI Interrupt 0000:06:05.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
[ 20.572000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 20.572000] Yenta: Routing CardBus interrupts to PCI
[ 20.804000] Yenta: ISA IRQ mask 0x00f8, PCI irq 11
[ 20.804000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 20.804000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[ 20.804000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x55ffffff
[ 20.804000] ACPI: PCI Interrupt 0000:06:06.4[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 21.048000] ACPI: PCI Interrupt 0000:06:06.3[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 21.756000] ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 21.868000] ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 31.412000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 31.412000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11

And the output of the command lspci:

00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc M24 1P [Radeon Mobility X600]
06:05.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
06:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:06.4 Generic system peripheral [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)

Revision history for this message
jan37 (dotjan-msn) wrote :
Download full text (6.7 KiB)

On my Fujitsu Siemens laptop Amilo Pi 1536 with ATI Mobility x1400 (fglrx) with Gutsy i see:

[ 32.808390] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0

dmesg | grep PCI gives:

[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 14.820874] PCI: PCI BIOS revision 2.10 entry at 0xfd833, last bus=5
[ 14.820877] PCI: Using configuration type 1
[ 14.820879] Setting up standard PCI resources
[ 32.800488] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 32.800501] PCI: Probing PCI hardware (bus 00)
[ 32.801165] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 32.801170] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 32.802156] PCI: Transparent bridge - 0000:00:1e.0
[ 32.802225] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 32.802535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 32.802672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 32.802802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 32.802948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 32.805703] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 32.805804] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 32.805902] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 32.806003] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 32.806100] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 32.806197] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 32.806294] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 32.806391] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 32.808383] PCI: Using ACPI for IRQ routing
[ 32.808385] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 32.808390] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 32.853011] PCI: Bridge: 0000:00:01.0
[ 32.853025] PCI: Bridge: 0000:00:1c.0
[ 32.853043] PCI: Bridge: 0000:00:1c.2
[ 32.853062] PCI: Bridge: 0000:00:1e.0
[ 32.853093] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 32.853099] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 32.853121] PCI: Enabling device 0000:00:1c.0 (0000 -> 0002)
[ 32.853126] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 32.853134] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 32.853156] PCI: Enabling device 0000:00:1c.2 (0000 -> 0002)
[ 32.853161] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 32.853168] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 32.853182] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 33.609146] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 33.609261] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 33.609453] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 21.580000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 21.580000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 21.684...

Read more...

To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Related questions

Remote bug watches

Bug watches keep track of this bug in other bug trackers.